This thread is to collect Milestone 6 issues.

Have you run out of space on the SD card? What is the output of sudo df -hl ?

My SSH session is currently clunky due to the system performance. Currently myopenhab is showing the system back down. the SD Card is 32GB with the following stats: ## Swap = Free: 0.01GB (19%), Used: 0.07GB (81%), Total: 0.09GB ## Root = Free: 25.03GB (89%), Used: 2.83GB (11%), Total: 2…

I upgraded from 2.5 Milestone 3 to Milestone 6 and experiencing issues with the Astro Binding. Events are not triggered on expected time but instead these are all triggered at once on midnight. I also noticed that if I for example change the Offset of one of the event not being triggered earlier the…

Is it expected that in 2.5 you need to install the BasicUI to be able to see icons in the Android app? On my 2.4 system I only have PaperUI installed and I am able to see icons on my phone, but with 2.5 M6 I didn’t get any icons until I installed BasicUI.

Broadlink Binding not work on latest 2.5 M6 Fall back to M5 then all error gone and work properly 2019-12-03 09:41:57.714 [ERROR] [nal.common.AbstractInvocationHandler] - An error occurred while calling method ‘ThingHandler.handleCommand()’ on ‘org.openhab.binding.broadlink.handler.BroadlinkRemote…

Please open a GirHub issue so the developers can correct the issues.

I had a similar issue last night (see here ) The issue seemed to resolve itself when I edited my .items file. Whilst glad it started to work, I wasn’t exactly filled with confidence that it won’t happen again.

[image] Bruce_Osborne: Please open a GirHub issue so the developers can correct the issues. The binding is not in the official repo of openHAB, so if an issue would be created it should be on the repo of the binding, but I don’t know where that is.

If I suspect my issue to be related to Java blowing up, is that considered openhab-core? I just want to make sure I’m being useful and putting items in the correct area, versus being a hindrance and putting chaff in the way.

openHAB Community

2.5 Milestone 6 Issues

Setup, Configuration and Use Installation

rliffredo (Roberto Liffredo) December 4, 2019, 10:24am 52

Same here, broadlink binding stopped working.
The problem is described also here Broadlink binding for RMx, A1, SPx and MP. Any interest? - #902 by Bernd_Ritter