I don’t understand, and apologize. I just want to create a slider item for two light bulbs that are in the same physical light fixture.
I have created the following:
Group:Dimmer kitchen_isl “Kitchen Island Light [(%.1f)]” (GF_Kitchen, Lights, kitchen_isl) {hue=“3,5;brightness;30”}
Dimmer Light_GF_Kitchen_Island_1 “Kitchen Island 1” (GF_Kitchen, Lights, kitchen_isl) {hue=“3;brightness;30”}
Dimmer Light_GF_Kitchen_Island_2 “Kitchen Island 2” (GF_Kitchen, Lights, kitchen_isl) {hue=“5;brightness;30”}
But in the sitemap it shows up as following:
I just want the “Kitchen Island” lights to appear the same as the "Kitchen table " single light.
In the sitemap: I can create this fine in a frame:
The sitemap is very basic, as I’m starting from scratch The Frame for kitchen_isl is just for testing, as I am trying to group it into :
Sitemap Home -> First Floor -> Kitchen -> Kitchen Island Light
sitemap home label=“Home”
{
Frame {
Group item=gFF label=“Second Floor” icon=“firstfloor”
Group item=gGF label=“First Floor” icon=“groundfloor”
Group item=gC label=“Basement” icon=“cellar”
Group item=Outdoor icon=“garden”
}
Frame {
Group item=Lights label=“All lighting” icon=“hue”
}
Frame {
Slider item=kitchen_isl icon=“hue”
}
}
Below is my items file, very similar to the sample items:
Group All
Group gGF (All)
Group gFF (All)
Group gC (All)
Group Outdoor (All)
Group Lights (All)
Group GF_Living “Great Room” (gGF)
Group GF_Kitchen “Kitchen” (gGF)
Group GF_Toilet “Downstairs Bathroom” (gGF)
Group GF_Corridor “Hallway” (gGF)
Group GF_Dining “Dining Room” (gGF)
Group GF_Office “Office” (gGF)
Group GF_Garage_Entry “Garage Entry” (gGF)
Group GC_stairs “Basement Stairs” (gC)
Group GC_play “Basement Play Room” (gC)
Group GC_media “Theater Room” (gC)
Group GC_Utility “Basement Utility Room” (gC)
Group FF_Corridor “Upstairs Hallway” (gFF)
Group FF_Bed “Master Bedroom” (gFF)
Group FF_Ebath “Ensuite Master Bathroom” (gFF)
Group FF_Bath “Upstairs Bathroom” (gFF)
Group FF_Child “Carter’s Bedroom” (gFF)
Group FF_Child2 “Kayda’s Bedroom” (gFF)
Group FF_Spare “Spare Bedroom” (gFF)
/* Lights */
Group:Dimmer kitchen_isl “Kitchen Island Light [(%.1f)]” (GF_Kitchen, Lights, kitchen_isl) {hue=“3,5;brightness;30”}
Dimmer Light_GF_Kitchen_Island_1 “Kitchen Island 1” (GF_Kitchen, Lights, kitchen_isl) {hue=“3;brightness;30”}
Dimmer Light_GF_Kitchen_Island_2 “Kitchen Island 2” (GF_Kitchen, Lights, kitchen_isl) {hue=“5;brightness;30”}
Color Light_GF_Living_Table_1 “Left Table Light” (GF_Living, Lights) {hue=“2”}
Color Light_GF_Living_Table_2 “Right Table Light” (GF_Living, Lights) {hue=“1”}
Color Light_GF_Living_Ceiling “Ceiling Light” (GF_Living, Lights) {hue=“6”}
Dimmer Light_GF_Kitchen_Table “Kitchen Ceiling Table Light” (GF_Kitchen, Lights) {hue=“4”}
Dimmer Light_GF_Garage_Entry “Garage Entry Light” (GF_Garage_Entry, Lights) {hue=“9”}
Dimmer Light_Outdoor_Garage “Garage Light” (Outdoor, Lights) {hue=“10”}
Switch Light_Outdoor_Front_1 “Front Right Light” (Outdoor, Lights) {hue=“8”}
Dimmer Light_Outdoor_Front_2 “Front Left Light” (Outdoor, Lights) {hue=“7”}
I have may bulbs that I would like to group, so any help would be greatly appreciated ( Most of my ligh fixtures accomodate 2 bulbs, and therefor I jsut want to be able to dim them together, but defined in the sitemap ( per room ) ( ie: a dimmer or slider control, vs a switch )
Any help is greatly appreciated.