Hi everyone,
i got a wired problem that started this week. For no reason, when knx autorefresh starts, the alarm from my knx-alarm-system is triggered and sets it off.
The funny thing is that this is close to the exact time every morning around 06:25 h.
My items down’t have the autoupdate flag set, at least it was not needed since openHAB 2 if i remember correctly
My Setup: openHAB 2 Build 837 and using the KNX1 Binding (online repository).
So if anyone got an idea how to get rid of this, or had any clue why this happens, please leave a note! Thanks!
Heres a snip of the KNX debug log (Note: i changed the GA’s to A/B/C just for feeling better ;-))
2017-03-31 06:25:26.760 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:29.369 [INFO ] [el.core.internal.ModelRepositoryImpl] - Refreshing model 'ourhome.items'
2017-03-31 06:25:29.404 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_STATUS_SCHARF.
2017-03-31 06:25:29.404 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_STATUS_SCHARF': one time reading scheduled.
2017-03-31 06:25:29.404 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_STATUS_UNSCHARF.
2017-03-31 06:25:29.404 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_STATUS_UNSCHARF': one time reading scheduled.
2017-03-31 06:25:29.404 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_STATUS_SCHARF in reader queue
2017-03-31 06:25:29.404 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_SIGNAL_SCHARF_IMPULSE.
2017-03-31 06:25:29.404 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_STATUS_SCHARF, DPT main 0 id 1.001, low priority
2017-03-31 06:25:29.404 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_SIGNAL_SCHARF_IMPULSE': one time reading scheduled.
2017-03-31 06:25:29.404 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_STATUS_SCHARF' DPT '1.001'
2017-03-31 06:25:29.404 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE.
2017-03-31 06:25:29.404 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE': one time reading scheduled.
2017-03-31 06:25:29.405 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM.
2017-03-31 06:25:29.405 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM': one time reading scheduled.
2017-03-31 06:25:29.405 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_ALARM.
2017-03-31 06:25:29.405 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_ALARM': one time reading scheduled.
2017-03-31 06:25:29.405 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_SCHALT_BEREIT.
2017-03-31 06:25:29.405 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_SCHALT_BEREIT': one time reading scheduled.
2017-03-31 06:25:29.405 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_SSB1_STOER_ALARM_UEBERWACHUNG.
2017-03-31 06:25:29.405 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_SSB1_STOER_ALARM_UEBERWACHUNG': one time reading scheduled.
2017-03-31 06:25:29.405 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_AG_BLITZ.
2017-03-31 06:25:29.405 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_AG_BLITZ': one time reading scheduled.
2017-03-31 06:25:29.406 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_AG_SIRENE.
2017-03-31 06:25:29.406 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_AG_SIRENE': one time reading scheduled.
2017-03-31 06:25:29.406 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_BM_GARDEROBE.
2017-03-31 06:25:29.406 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_BM_GARDEROBE': one time reading scheduled.
2017-03-31 06:25:29.406 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_BM_HWR.
2017-03-31 06:25:29.406 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_BM_HWR': one time reading scheduled.
2017-03-31 06:25:29.406 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_BM_KUECHE.
2017-03-31 06:25:29.406 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_BM_KUECHE': one time reading scheduled.
2017-03-31 06:25:29.406 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item AZ_BM_WZ_GARAGE.
2017-03-31 06:25:29.406 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'AZ_BM_WZ_GARAGE': one time reading scheduled.
2017-03-31 06:25:29.407 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item HINWEIS_ZEILE_1.
2017-03-31 06:25:29.407 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'HINWEIS_ZEILE_1': one time reading scheduled.
2017-03-31 06:25:29.407 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item HINWEIS_ZEILE_2.
2017-03-31 06:25:29.407 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'HINWEIS_ZEILE_2': one time reading scheduled.
2017-03-31 06:25:29.407 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Initializing read of item HINWEIS_ZEILE_3.
2017-03-31 06:25:29.407 [DEBUG] [x.internal.bus.KNXBusReaderScheduler] - Datapoint 'HINWEIS_ZEILE_3': one time reading scheduled.
[and so on]
2017-03-31 06:25:29.521 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:29.521 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:29.543 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_SSB1_STATUS_SCHARF, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:29.572 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:29.572 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_STATUS_UNSCHARF in reader queue
2017-03-31 06:25:29.572 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_STATUS_UNSCHARF, DPT main 0 id 1.001, low priority
2017-03-31 06:25:29.572 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_STATUS_UNSCHARF' DPT '1.001'
2017-03-31 06:25:29.682 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:29.682 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:29.705 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_STATUS_UNSCHARF, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:29.733 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:29.733 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_SIGNAL_SCHARF_IMPULSE in reader queue
2017-03-31 06:25:29.733 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_SIGNAL_SCHARF_IMPULSE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:29.733 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_SIGNAL_SCHARF_IMPULSE' DPT '1.001'
2017-03-31 06:25:29.835 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:29.835 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:29.867 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_SIGNAL_SCHARF_IMPULSE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:29.885 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:29.885 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE in reader queue
2017-03-31 06:25:29.885 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:29.885 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE' DPT '1.001'
2017-03-31 06:25:29.996 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:29.996 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.017 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.046 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.046 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM in reader queue
2017-03-31 06:25:30.046 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.046 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM' DPT '1.001'
2017-03-31 06:25:30.151 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.151 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.174 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.202 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.202 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_ALARM in reader queue
2017-03-31 06:25:30.202 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_ALARM, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.202 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_ALARM' DPT '1.001'
2017-03-31 06:25:30.315 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.315 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.336 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_ALARM, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.365 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.365 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_SCHALT_BEREIT in reader queue
2017-03-31 06:25:30.365 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_SCHALT_BEREIT, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.365 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_SCHALT_BEREIT' DPT '1.001'
2017-03-31 06:25:30.471 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.472 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.493 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_SCHALT_BEREIT, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.522 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.522 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_SSB1_STOER_ALARM_UEBERWACHUNG in reader queue
2017-03-31 06:25:30.522 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_SSB1_STOER_ALARM_UEBERWACHUNG, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.523 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_SSB1_STOER_ALARM_UEBERWACHUNG' DPT '1.001'
2017-03-31 06:25:30.627 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.628 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.656 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_SSB1_STOER_ALARM_UEBERWACHUNG, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.678 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.678 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_AG_BLITZ in reader queue
2017-03-31 06:25:30.678 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_AG_BLITZ, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.679 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_AG_BLITZ' DPT '1.001'
2017-03-31 06:25:30.785 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.786 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.807 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_AG_BLITZ, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:30.836 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:30.836 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_AG_SIRENE in reader queue
2017-03-31 06:25:30.836 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_AG_SIRENE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:30.836 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_AG_SIRENE' DPT '1.001'
2017-03-31 06:25:30.951 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:30.952 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:30.974 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'OFF' to datapoint 'command DP A/B/C AZ_AG_SIRENE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.002 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.002 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_BM_GARDEROBE in reader queue
2017-03-31 06:25:31.003 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_BM_GARDEROBE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:31.003 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_BM_GARDEROBE' DPT '1.001'
2017-03-31 06:25:31.042 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.042 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.064 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_BM_GARDEROBE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.093 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.093 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_BM_HWR in reader queue
2017-03-31 06:25:31.093 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_BM_HWR, DPT main 0 id 1.001, low priority
2017-03-31 06:25:31.093 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_BM_HWR' DPT '1.001'
2017-03-31 06:25:31.139 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.140 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.161 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_BM_HWR, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.190 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.190 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_BM_KUECHE in reader queue
2017-03-31 06:25:31.190 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_BM_KUECHE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:31.190 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_BM_KUECHE' DPT '1.001'
2017-03-31 06:25:31.230 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.231 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.253 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_BM_KUECHE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.283 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.283 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item AZ_BM_WZ_GARAGE in reader queue
2017-03-31 06:25:31.283 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C AZ_BM_WZ_GARAGE, DPT main 0 id 1.001, low priority
2017-03-31 06:25:31.283 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'AZ_BM_WZ_GARAGE' DPT '1.001'
2017-03-31 06:25:31.322 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.323 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.350 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_BM_WZ_GARAGE, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.373 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.373 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item HINWEIS_ZEILE_1 in reader queue
2017-03-31 06:25:31.374 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C HINWEIS_ZEILE_1, DPT main 0 id 16.001, low priority
2017-03-31 06:25:31.374 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'HINWEIS_ZEILE_1' DPT '16.001'
2017-03-31 06:25:31.510 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.511 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.556 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value ' ' to datapoint 'command DP A/B/C HINWEIS_ZEILE_1, DPT main 0 id 16.001, low priority'
2017-03-31 06:25:31.562 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.562 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item HINWEIS_ZEILE_2 in reader queue
2017-03-31 06:25:31.562 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C HINWEIS_ZEILE_2, DPT main 0 id 16.001, low priority
2017-03-31 06:25:31.562 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'HINWEIS_ZEILE_2' DPT '16.001'
2017-03-31 06:25:31.674 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.674 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.718 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value ' ' to datapoint 'command DP A/B/C HINWEIS_ZEILE_2, DPT main 0 id 16.001, low priority'
2017-03-31 06:25:31.724 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
2017-03-31 06:25:31.724 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: got new item HINWEIS_ZEILE_3 in reader queue
2017-03-31 06:25:31.724 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Trying to read from KNX bus: command DP A/B/C HINWEIS_ZEILE_3, DPT main 0 id 16.001, low priority
2017-03-31 06:25:31.724 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Sending read request to KNX for item 'HINWEIS_ZEILE_3' DPT '16.001'
2017-03-31 06:25:31.768 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
Here the alarm is on:
2017-03-31 06:25:31.793 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value 'ON' to datapoint 'command DP A/B/C AZ_SSB1_ALARM, DPT main 0 id 1.001, low priority'
2017-03-31 06:25:31.892 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Received groupWrite Event.
2017-03-31 06:25:31.893 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: DatapointReaderTask Waiting 50 msecs to prevent KNX bus overload
2017-03-31 06:25:31.936 [DEBUG] [.binding.knx.internal.bus.KNXBinding] - Wrote value ' ' to datapoint 'command DP A/B/C HINWEIS_ZEILE_3, DPT main 0 id 16.001, low priority'
2017-03-31 06:25:31.943 [DEBUG] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Waiting for new item in reader queue
And here is the events.log from that time:
2017-03-31 06:25:29.522 [ItemCommandEvent ] - Item 'AZ_SSB1_STATUS_SCHARF' received command ON
2017-03-31 06:25:29.683 [ItemCommandEvent ] - Item 'AZ_SSB1_STATUS_UNSCHARF' received command OFF
2017-03-31 06:25:29.836 [ItemCommandEvent ] - Item 'AZ_SSB1_SIGNAL_SCHARF_IMPULSE' received command OFF
2017-03-31 06:25:29.996 [ItemCommandEvent ] - Item 'AZ_SSB1_SIGNAL_UNSCHARF_IMPULSE' received command OFF
2017-03-31 06:25:30.153 [ItemCommandEvent ] - Item 'AZ_SSB1_STATUS_UNSCHARF_NACH_ALARM' received command OFF
2017-03-31 06:25:30.316 [ItemCommandEvent ] - Item 'AZ_SSB1_ALARM' received command OFF
2017-03-31 06:25:30.472 [ItemCommandEvent ] - Item 'AZ_SSB1_SCHALT_BEREIT' received command OFF
2017-03-31 06:25:30.628 [ItemCommandEvent ] - Item 'AZ_SSB1_STOER_ALARM_UEBERWACHUNG' received command OFF
2017-03-31 06:25:30.786 [ItemCommandEvent ] - Item 'AZ_AG_BLITZ' received command OFF
2017-03-31 06:25:30.952 [ItemCommandEvent ] - Item 'AZ_AG_SIRENE' received command OFF
2017-03-31 06:25:31.512 [ItemCommandEvent ] - Item 'HINWEIS_ZEILE_1' received command
2017-03-31 06:25:31.675 [ItemCommandEvent ] - Item 'HINWEIS_ZEILE_2' received command
2017-03-31 06:25:31.769 [ItemCommandEvent ] - Item 'AZ_SSB1_ALARM' received command ON
2017-03-31 06:25:31.793 [ItemStateChangedEvent ] - AZ_SSB1_ALARM changed from OFF to ON
2017-03-31 06:25:31.893 [ItemCommandEvent ] - Item 'HINWEIS_ZEILE_3' received command