I have been struggling with this issue for over a month now and short of a reinstall of Ubuntu from scratch at I’m at loss to to why this is happening. For the past month or so, Whenever I do a reboot of the machine, I’m am told the Controller is offline. And the only solution I have come up with …

I am not certain this would make a difference if the issue is port naming. @ptmuldoon I am running a similar configuration to yours, but do not have this issue. My device always comes up on ttyACM0 on any reboot or power cycle, however, I can replicate the issue you mention if I remove the Z-Stick a…

for months I am running OH2 now. Today I upgraded to @chris zwave snapshot from yesterday. Since then I get that error and nothing helps to get the stick again when I do ls /dev/tty* I can see there is still the ACM0 8:44:36.107 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Connecting to seri…

Have you only updated the zwave binding or everything via apt-get? There is some discussion going around (see the thread posted by @RHINESEL above)… Some had success with installing the mentioned libraries.

[image] jaydee73: Have you only updated the zwave binding or everything via apt-get? There is some discussion going around (see the thread posted by @RHINESEL above)… Some had success with installing the mentioned libraries. ONLY zwave binding… that was the odd thing. I did the following no…

[image] shorty707: ONLY zwave binding… that was the odd thing. That’s unlikely I think… Karaf handles dependencies for you so it will also upgrade these as well. So you will have also upgraded to the new serial library that is causing all the problems…

well what I did this morning was: uninstall ZWAVE 2.0 via PaperUI install ZWAVE 2.0 via PaperUI restart OH I did not check log if automatically any dependencies were triggered

Yep - so as I said, I think it will have installed the new serial library as well and that will explain your problem it seems. To add - dependencies are always loaded - otherwise it won’t work :wink:

Please wait for the next build and then try again - the serial lib change has just been reverted .

Anyword on when to expect the next build? I apt-get updated and upgraded yesterday but still had same issues with ttyACM0.

openHAB Community

Another Zwave /dev/ttyACM0 not found

Add-ons Bindings

RHINESEL (Matthew Valeri) December 27, 2016, 2:50am 2

Did you add the libraries mentioned in this thread:

https://community.openhab.org/t/oh2b5-and-dev-ttyacm0-z-wave/18783/25