# Are TP-link ZigBee devices supported by ZigBee binding?

**URL:** <https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100>\
**Category:** Beginners\
**Tags:** tp-link, zigbee-binding\
**Created:** [March 1, 2021, 4:53am UTC](https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100 "2021-03-01T04:53:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gibber](https://community.openhab.org/user_avatar/community.openhab.org/gibber/32/48340_2.png) [@Gibber](https://community.openhab.org/u/Gibber)\
**Post date:** [March 1, 2021, 4:53am UTC](https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100/1 "2021-03-01T04:53:54Z")

</div>

Does anyone know if the ZigBee binding supports the TP Link ZigBee devices like the CS100 door sensor and the MS100 motion sensor? I don’t see TP Link mentioned in the binding documentation and I am uncertain as to how closely they conform to the ZigBee standard.

If not, is there any way to add them?

Thanks

---

<div class="post-metadata">

**Author:** ![Gibber](https://community.openhab.org/user_avatar/community.openhab.org/gibber/32/48340_2.png) [@Gibber](https://community.openhab.org/u/Gibber)\
**Post date:** [March 7, 2021, 6:19pm UTC](https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100/2 "2021-03-07T18:19:46Z")

</div>

I finally got my CC2531 dongle working and was able to check out the TP Link devices. They paired quickly and are supported by the ZigBee binding.

The CS100 door sensor provides:  
Battery level – number  
Tamper – switch  
Battery Alarm – string  
Contact Portal 1 – switch  
Low Battery – switch  
Battery Voltage – Number

The MS100 motion sensor provides:  
Battery level – number  
Motion Intrusion - switch  
Tamper – switch  
Battery Alarm – string  
Motion Presence - switch  
Low Battery – switch  
Battery Voltage – Number Electrical Potential ??  
Illuminance – number

The dongle also paired with an OSRAM Lightify 73674 bulb:  
Color Temperature - dimmer  
Total Active Power - number  
Color - color

---

<div class="post-metadata">

**Author:** ![ElksInNC](https://community.openhab.org/user_avatar/community.openhab.org/elksinnc/32/86737_2.png) [@ElksInNC](https://community.openhab.org/u/ElksInNC)\
**Post date:** [January 27, 2022, 5:19am UTC](https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100/3 "2022-01-27T05:19:55Z")

</div>

Hey Rick,

Several of us in the Home Assistant / Zigbee2MQTT world picked up these MS100s on sale.

We have successfully paired them with Z2M and are getting occupancy, battery, battery low, link quality and “tamper”. We are NOT getting illuminance and after disassembly - we cannot find anything that would appear to be an anti-tamper trigger.

Did you actually see a change in the intrusion value and/or Illuminance in your usage?

What does/did motion intrusion do?

Thanks for any help or insight you can provide.

---

<div class="post-metadata">

**Author:** ![ElksInNC](https://community.openhab.org/user_avatar/community.openhab.org/elksinnc/32/86737_2.png) [@ElksInNC](https://community.openhab.org/u/ElksInNC)\
**Post date:** [January 29, 2022, 3:02pm UTC](https://community.openhab.org/t/are-tp-link-zigbee-devices-supported-by-zigbee-binding/118100/4 "2022-01-29T15:02:06Z")

</div>

In case anyone comes across this - we have been able to complete an extension for Zigbee2MQTT that will report all factors correctly except for Tamper. After tweaking some of the other settings to get the device to stay online (ie report in even when there is not a motion event after a fixed amount of time) - it appears that perhaps the tamper is just a watchdog signal. If it becomes “unavailable” - then you can assume someone took the batteries out.

This device is now officially supported in Z2M and it will be auto-discovered upon pairing in that platform - thanks user photo64!