# Binding for air quality control module - Awair

**URL:** <https://community.openhab.org/t/binding-for-air-quality-control-module-awair/50924>\
**Category:** Bindings\
**Created:** [September 6, 2018, 11:15am UTC](https://community.openhab.org/t/binding-for-air-quality-control-module-awair/50924 "2018-09-06T11:15:08Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![m4rk](https://community.openhab.org/user_avatar/community.openhab.org/m4rk/32/49247_2.png) [@m4rk](https://community.openhab.org/u/m4rk)\
**Post date:** [March 13, 2021, 6:51am UTC](https://community.openhab.org/t/binding-for-air-quality-control-module-awair/50924/11 "2021-03-13T06:51:51Z")

</div>

Any progress on this? I am looking for an accurate air quality monitor that can integrate into openhab and grafana. Awair and uhoo could be possible but it seems uhoo may require subscription to access the data

If there is no binding then I could scrape the web dashboard or use api to get the data.

Any advise would be appreciated as I am just doing the initial research before deciding what device to buy. Is Foobot is discontinued?

edit… I created my own solution \>\>\>\>

> [@Awair Element air quality monitor - data charting without using a binding](https://community.openhab.org/t/awair-element-air-quality-monitor-data-charting-without-using-a-binding/119161):
>
> My setup (Prerequisites for openHAB v3): openHAB3 installed on a RPi4 using openhabian image: [download page](https://www.openhab.org/download/) Grafana and Influx installed via menu. Some familiarity with using these in openHAB will be needed!! Grafana gauges are a plugin called D3 gauge by Brian Gann. To install Influx and Grafana use a console window and open the config menu: sudo openhabian-config … menu item 20-24 HTTP binding installed via openhab addons menu: http://“IP of your openHAB server”:8080/settings/addons A…

---

_[View the full topic](https://community.openhab.org/t/binding-for-air-quality-control-module-awair/50924)._
