sorry folks, but is better to use another thread, and leave this as a general thread on the binding new versions and malfunctions:
massi
sorry folks, but is better to use another thread, and leave this as a general thread on the binding new versions and malfunctions:
massi
@Alberto_C how did you create this item you show in the picture?
I confirm correct tags are added if items are added automatically using PaperUI (Configuration > System > Item Linking > Simple mode > SAVE), so they are ready to go to be used by Google Home/Alexa.
Otherwise if you create items manually (via PaperUI or via .items file), then YES you have to add tags after creation.
Bye
Massi
Items have been added via PaperUI, but I did not have the simple mode active.
Thanks for the explanation.
Another question: X8000 thermostat is supported?
No, this device is using a different integration protocol and is not supported by the binding at the moment.
Massi
Continuing the discussion from [BTicino/OpenWebNet] New openHAB2 binding ready for testing:
Hello,
congratulations to all !!!
I have problems handling shutter with HomeKit while directly with Openhab they work well.
OpenHab 2.4.0.Mx
Openwebnet 2.4.0.b7
HomeKit 2.4.0
MH202
Configuration
OpenHab OK
Scan (no .items) protocoll OpenWeb OK , Control OK, Light OK, Dimmer OK, Shutter OK
I can not see the rolladen devices on the iPhone app
What am I doing wrong ?
I tried with .items but I do not have the shutter devices on app, light and dimmer OK
Thank you
:things
Bridge openwebnet:bus_gateway:mybridge [ host=“192.168.1.40”, passwd=“12345” ] {
bus_automation myshutter “Living room Shutter” [ where=“91”, shutterRun=“12000” ]
}
:items
Rollershutter LR_Bus_Shutter “Shutter [%.0f %%]” (FF_Salon) [ “Blinds” ] {channel=“openwebnet:bus_automation:mybridge:myshutter:shutter” }
Rollershutter VR1_FF_Salon “VR1 Salon” (GF_Kitchen, Shutters) [ “Blinds” ]{channel=“openwebnet:bus_automation:a477e11b:91” }
not shure but perhaps try this edits:
:items
Rollershutter LR_Bus_Shutter “Shutter [%.0f %%]” (FF_Salon) {channel=“openwebnet:bus_automation:mybridge:myshutter:shutter” }
Rollershutter VR1_FF_Salon “VR1 Salon” (GF_Kitchen, Shutters) <Blinds>{channel=“openwebnet:bus_automation:a477e11b:91” }
If by “iPhone app” you mean Apple HomeKit and Siri, then I am not sure that rollershutters are supported yet by the OH2 HomeKit addon; at least from this documentation it looks like there is no tagging support for shutters in HomeKit addon:
Massi
Hello,
I also doubt.
I do not know if the documentation is updated to the latest beta version
I would like to have a definitive confirmation.
Hello,
thanks for the suggestion, tonight I try
Surely online docs are iupdated to the latest official version, 2.3.0.
I see you are on 2.4.0.Mx,so probably they are adding more in the Milestone version.
Since it’s not strictly related to the OWN binding but rather to HomeKit support, i invite you to continue the conversation in other threads to keep this thread for issues related to the binding itself.
Massi
Hello,
how can I create .items to send a frame command directly?
es.
*6 * 10 * 4000 ##
(open the lock of the canceletto)
*# 1 * 74 * # 2 * 0 * 4 * 0 ##
(time command)
Thank you
Hi Michele,
Fot command the door lock, use the binding 1.12 or 1.13 snapshot present in openhab 2 interfaces.
Read these docs :
Actually Bticino openhab2 binding does not support video door entry system (VDES)
Arnaud
Hello,
Massimo, you’re doing a great job.
An implementation proposal
It could be useful to use conversion function:
input : openwebnet frame (Sensor, Lights, CEN, CEN +, etc …)
output : command or comands frame.
The same function has no input and output a frame command (Lights, Push, CEN etc …
What do you think ?
Good evening
Hi Massimo,
I’m running tests.
I noticed that when you create items a Light the “Lighting” Tags are inserted while in the shutters the “” Tags is null.
My doubt, this is not why the shutters are not seen in the Homekit?
Thank you
Hi Massimo,
Update:
In the official version of HomeKit it is not managed
It works in the modified version 2.3.0, it is managed as “Blinds” tags
https://community.openhab.org/t/homekit-support-for-additional-accessory-types/19344/71
https://github.com/epike/openhab2-addons/releases
Truly a pity that it is not managed, I wonder why
Hi @gozilla01
blinds
tag: I will add it to the next beta8 version for shutter things, just to be prepared when the Blinds tag will be officially supported by HomeKit. In the meantime, you can add the tag yourself either by defining the item via .items file (which I suggest) or via REST API, see here for how to.
conversion function and send command directly:
I am not sure I understand what you mean by “conversion function”. However I like the idea of giving the possibility to define manually via .items/.things files a generic thing and item that can send OpenWebNet frames directly. I suggest you describe this clearly with a good example of expected channels as a wanted feature in the binding’s issue list:
https://github.com/mvalla/openhab2-addons/issues
bye
massi
Hi Massimo,
blinds tag
yes, I used the configuration from .items, it works
conversion function
I entered isseu
thank you
Hi All,
I’m configuring my home by using openHab2 and orange PI Zero.
I’d configured my HomeServer1 but after checking my “things” in UI Panel, i’ve found only the lights as “BUS Switch” but not my “Automation”. Better, it seems that my Automation thing were recognized as Switch.
Is there any mode to “override” that configuraton? I’m trying to find config file in my OrangePI, but I don’t see any .thing config file.
Could you help me?
Thanks and regards
Giuseppe
Hallo,
a new release of the OpenWebNet biding is available: beta8.
This new release is a bug-fixing release:
Blinds
tag for shutter channels (Rollershutter items)The binding is also published on the Eclipse IoT Marketplace.
If you cannot find the binding in the search, probably you have an issue with certificates in your Java environment, that must be updated. Follow this solution to add the required certificates to access all bindings on the Marketplace.
To install/upgrade to the new version, follow the instructions in the README.
For any help/issue on the new binding, write here in this thread.
As usual, a special thanks goes to those who helped testing the preview release! (see README for a list).
Ciao!
MASSI
Hi Giuseppe, which address are your Automation things that have been seen as Switches? Which BTicino models are they? If in your plant you have connected the shutters to BTicino switches than it’s possible that they are discovered as switches…
If you want to try manual configuration you should first delete the found things fromUI, then create a new .things
file in the conf directory that on RaPi should be under: /etc/openhab2/things
(look first to the docs of openHAB before asking these basic questions…)
You can find some examples of .things file configuration in the binding README.
Bye
Massi