Cannot set Z-Wave Controller in Exclusion Mode

Setup, Configuration and Use Beginners
1

Hey there,

I’m trying to set my Z-Wave-Conroller to Exclusion-Mode via HABmin but there is no Exclusion-Mode Button in the top right corner. I can’t explain myself where the button is because it has been there some time ago.

Is there another possibility to set the controller to Exclusion-Mode?

Thanks for your help.

2

Select the Serial Controller thing in HABmin, then click on the Tools button and select Show Advanced Settings.

1 Like
3

If you have an Aeotec USB Controller from Aeon Labs (USB stick) , you cannot set it to inclusion/exclusion mode via habmin.
You have to remove it and press the button on the USB stick 3 times.

4

This is incorrect.

It is possible to remove it and use the button, but it is also possible to do it directly via HABmin or PaperUI.

5

Really? Oh, great, that will make adding new devices much easier - I will test it over the weekend.

6

Also, if using secure inclusion, you must leave it installed, cannot secure include with the stick out.

7

Thank you

“Select the Serial Controller thing in HABmin, then click on the Tools button and select Show Advanced Settings.”

With the Serial Controller hint everything worked.