Great,
if you are going to test Intertechno, you can also test my adopted Intertechno binding described here. It adds support for V3 protocol.
Here is the description of the changes I made:
Intertechno V3
{ culintertechno="type=v3;id=01101011000011110000000000;channel=2" }
You have to provide the 26 digits id and the channel (0-15). Optional, you can provide the group parameter (with value “1”) , which results in switching all items with the given id.
{ culintertechno="type=v3;id=01101011000011110000000000;group=1" }
Raw mode
If you have an unsupported intertechno device you can fallback to the raw mode
{ culintertechno="type=raw;commandOn=FF00FF00FF;commandOff=FF00FF00F0" }
This configuration allows you to manual specify the complete commands to send in either ON or OFF state. The given commands will be sent directly to the CUL (prefixed with “is”).