My openhab is 2.4 on RaspberryPi, I installed zwave binding. Many zwave devices were discovered but the danalock was “Unknown Device”. It appears online but there is no channels or parameters. can anyone help? thx [Capture] This is the logs of adding danalock 2019-05-12 04:22:02.682 [INFO ] [g…

[image] Ahmed_Saad: My openhab is 2.4 on RaspberryPi You need to upgrade to the latest 2.5 zwave snapshot binding. https://ci.openhab.org/job/openHAB2-Bundles/lastStableBuild/org.openhab.addons.bundles$org.openhab.binding.zwave/ [image] Discovery - ZWave - Bindings The ZWave bin…

Thank you for replying. I searched for installing the latest update of zwave binding and I found these steps uninstall zwave binding from paper UI clear cache Drop the jar file in the addons folder Restart openhab I did all these steps but there is a problem 2019-05-12 14:39:22.833 [WARN ] [org…

I am using putty program for ssh access, I don’t know the command that equal list -s | grep xstream But in general, I dropped this jar file in the addons folder http://central.maven.org/maven2/org/apache/servicemix/bundles/org.apache.servicemix.bundles.xstream/1.4.7_1/org.apache.servicemix.bundl…

[image] Ahmed_Saad: I am using putty program for ssh access You need to use the karaf console (after logging in with shh): [image] The Console a vendor and technology agnostic open source automation software for your home First attempt to login may fa…

Thank you for your help! I used the karaf consol and installed the serial driver with feature:install openhab-transport-serial openhab> list -s | grep xstream 270 x Active x 80 x 1.4.7.1 x org.apache.servicemix.bundles.xstream Then installed the “Serial Binding” in paper ui t…

[image] Ahmed_Saad: the danalock still unknown device From your log it looks okay, the zwave stick is online. First check through karaf if you really have the latest (and only the latest) zwave binding active: bundle:list | grep -i zwave If you are seeing something like this (with a differ…

This is the result of bundle:list | grep -i zwave openhab> bundle:list | grep -i zwave 271 x Active x 80 x 2.5.0.201905111054 x openHAB Add-ons :: Bundles :: ZWave Binding Please can you explain how to include the device (through the binding!) within the first 15 seconds after the binding…

[image] Ahmed_Saad: Please can you explain If you have a zwave stick with battery and an inclusion button, don’t use that for secure inclusion. Instead go to either “Inbox” and hit the plus sign, then choose the zwave binding for PaperUI or go to “Configuration” “Things” and hit the plus sig…

It is work finally, But turned to offline, I rebooted openhab but there is nothing change 2019-05-13 17:56:26.656 [hingStatusInfoChangedEvent] - 'zwave:device:24e12744:node2' changed from ONLINE: Node initialising: REQUEST_NIF to OFFLINE (COMMUNICATION_ERROR): Node is not communicating with control…

About

Get Involved
Support openHAB
- Foundation
- Donate
Resources

GitHub

openHAB Community

Danalock Unknown Device

Off-Topic

sihui (SiHui) May 12, 2019, 2:05pm 4

Ahmed_Saad:

Could not resolve module: org.openhab.binding.zwave

Latest Zwave binding missing module? Bindings

In the Karaf console, what do you see when you run this? list -s | grep xstream In a recent 2.5 snapshot (build 1587), I see this. openhab> list -s | grep xstream 65 │ Active │ 80 │ 1.4.7.1 │ org.apache.servicemix.bundles.xstream In an older 2.5 snapshot (build 1502), I see nothing. If this bundle is not installed, try dropping this jar in addons. http://central.maven.org/maven2/org/apache/servicemix/bundles/org.apache.servicemix.bundles.xstream/1.4.7_1/org.apache.servicem…

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled