[deconz] Issues with automatic discovery of bridge and sensors and timeouts (all things go OFFLINE and ONLINE again)

David_Graeff · January 14, 2019, 2:02pm

No, the thing id must be unique. I guess your openHAB is using only one Thing then and it seems to work anyway.

cweitkamp · January 14, 2019, 2:12pm

Hi all,

@David_Graeff already answered all questions. Thank you.

In detail: currently the design for things of the deCONZ binding tries to follow this table (see Supported Devices · dresden-elektronik/deconz-rest-plugin Wiki · GitHub):

	Attribute	Unit	Resource Type
A	`state.alarm`	bool	ZHAAlarm
b	`config.battery`	%	(any battery-powered sensor)
C	`state.carbonmonoxide`	bool	ZHACarbonMonoxide
d	`state.dark`	bool	ZHAPresence
F	`state.fire`	bool	ZHAFire
H	`state.humidity`	0.01%	ZHAHumidity
L	`state.lightlevel` `state.lux` `state.dark` `state.daylight`	lux bool bool	ZHALightLevel
l	`state.lowbattery`	bool	(any IAS Zone sensor)
M	`state.presence`	bool	ZHAPresence
O	`state.open`	bool	ZHAOpenClose
P	`state.pressure`	hPa	ZHAPressure
T	`state.temperature`	0.01˚C	ZHATemperature
t	`config.temperature`	0.01˚C	(any Xiaomi sensor)
p	`state.tampered`	bool	(any IAS Zone sensor)
W	`state.water`	bool	ZHAWater
V	`state.vibration`	bool	ZHAVibration

Please note some points:

Some sensors of the same type may support more channels than other ones (e.g. TRÅDFRI motion sensor (Mbd) and Hue motion sensor (Mb)). In such case the channels will be added during runtime.
Some of the listed sensors are not yet supported by the binding (e.g. ZHAWater).
~~The consumption sensor is not yet listed.~~ It is listed in the Supported Smart Plugs section.

hehold · January 14, 2019, 3:15pm

Thanks a lot for your feedback. Unfortunately this is again something I’m having troubles to find/understand (started with OH and ZigBee only this year) … what is where.

I found consumption, but not under Sensors but SmartPlugs

And here my smart plug (Bitron 902010/25) is listed with Measured Values Cp and not P, thus I was expecting the power to be reported via a consumptionsensor and not a powersensor.

Is this thinking wrong? Other way round, what is the correct way to figure out which sensor to use to get the desired data, as in my case power from a Cp smart plug?

cweitkamp · January 14, 2019, 4:20pm

No, it is not. Indeed. Your opinion is very much appreciated.

Please keep in mind that we are facing a situation why we really need this discussion. A new OH2 user - do not get me wrong - tries to work with a very young binding. We are currently finishing touches with it.

So please keep ongoing.

I have to admit that I totally missed the Supported Smart Plugs table. The state.power attribute is not a mandatory information on a ZHAConsumption device. That is the reason why the OH2 thing currently does not support it. But imho we should improve this and add it to the binding. I will take care of that.

Schelli · January 14, 2019, 9:43pm

@hehold here, christoph was so kind to fix it right away… this should fix your problem once its merged…

hehold · January 15, 2019, 9:56am

Now that’s really fast! Great work. Will test as soon as it is merged.

BTW, regarding documentation again … I was looking for a description on how to install a Snapshot build of an addon. I found something in the FAQ, but unfortunately the link pointing to the snapshot builds is not working for me.

I found a *.kar file, which looks like the correct one at https://ci.openhab.org/job/openHAB-Distribution. Is this the right place to download the latest builds?

cweitkamp · January 15, 2019, 12:30pm

The build server has been moved. The linked FAQs seems to be outdated. Have a look here: https://ci.openhab.org/job/openHAB2-Bundles/lastBuild/

hehold · January 19, 2019, 6:04pm

I’ve tried now with the new version (2.5.0.201901142229) but without success.
I can read power or consumption, but not both together. As soon as I add the second item, the first is not read anymore - first I add power and got 29W - next I added consumption and got 10178Wh, but when switching off the device, power is not updated anymore, only consumption is updated:

2019-01-19 18:52:04.550 [hingStatusInfoChangedEvent] - 'deconz:powersensor:homeserver:bitronsd01_w1' changed from UNINITIALIZED to INITIALIZING
2019-01-19 18:52:04.555 [hingStatusInfoChangedEvent] - 'deconz:powersensor:homeserver:bitronsd01_w1' changed from INITIALIZING to OFFLINE (CONFIGURATION_PENDING)
2019-01-19 18:52:04.576 [hingStatusInfoChangedEvent] - 'deconz:powersensor:homeserver:bitronsd01_w1' changed from OFFLINE (CONFIGURATION_PENDING) to ONLINE
2019-01-19 18:52:04.584 [vent.ItemStateChangedEvent] - bitronsd01_watt changed from NULL to 29 W
2019-01-19 18:52:39.425 [hingStatusInfoChangedEvent] - 'deconz:consumptionsensor:homeserver:bitronsd01_c1' changed from UNINITIALIZED to INITIALIZING
2019-01-19 18:52:39.431 [hingStatusInfoChangedEvent] - 'deconz:consumptionsensor:homeserver:bitronsd01_c1' changed from INITIALIZING to OFFLINE (CONFIGURATION_PENDING)
2019-01-19 18:52:39.442 [hingStatusInfoChangedEvent] - 'deconz:consumptionsensor:homeserver:bitronsd01_c1' changed from OFFLINE (CONFIGURATION_PENDING) to ONLINE
2019-01-19 18:53:31.860 [.ItemChannelLinkAddedEvent] - Link 'bitronsd01_cons-deconz:consumptionsensor:homeserver:bitronsd01_c1:consumption' has been added.
2019-01-19 18:53:31.870 [vent.ItemStateChangedEvent] - bitronsd01_cons changed from NULL to 10178 Wh
2019-01-19 18:53:32.732 [vent.ItemStateChangedEvent] - bitronsd01_cons changed from 10178 Wh to 10179 Wh
2019-01-19 18:53:52.730 [vent.ItemStateChangedEvent] - bitronsd01_cons changed from 10179 Wh to 10180 Wh
2019-01-19 18:53:56.389 [ome.event.ItemCommandEvent] - Item 'bitronsd01_onoff' received command OFF
2019-01-19 18:53:56.401 [nt.ItemStatePredictedEvent] - bitronsd01_onoff predicted to become OFF
2019-01-19 18:53:56.442 [vent.ItemStateChangedEvent] - bitronsd01_onoff changed from ON to OFF

Shouldn’t it work with this config?

Bridge deconz:deconz:homeserver [ host="192.168.1.67", apikey="6B223453D9" ] {
    powersensor            bitronsd01_w1     "Bitron SD01 W"       [ id="2" ] 	
	consumptionsensor      bitronsd01_c1     "Bitron SD01 Wh"      [ id="2" ] 
    
} 
...
Number:Power   bitronsd01_watt  "B Verbrauch    [%.0f %unit%]"      {channel="deconz:powersensor:homeserver:bitronsd01_w1:power"} 
Number:Energy  bitronsd01_cons  "B Cons         [%.0f %unit%]"      {channel="deconz:consumptionsensor:homeserver:bitronsd01_c1:consumption"}

jcf6288 · January 19, 2019, 8:51pm

While playing with Deconz I wrote this for node red while the binding is getting fixed. It allows for unit conversion and will output to your mqtt server. Update your websocket address, units and mqtt. It uses uniqueid vs id since id can change.

[{"id":"7da00429.467ddc","type":"tab","label":"Deconz","disabled":false,"info":""},{"id":"6c9ab41.87c244c","type":"websocket in","z":"7da00429.467ddc","name":"Deconz","server":"","client":"cb1bee35.eb442","x":110,"y":80,"wires":[["b537cf10.2e873"]]},{"id":"b537cf10.2e873","type":"json","z":"7da00429.467ddc","name":"","property":"payload","action":"","pretty":false,"x":170,"y":220,"wires":[["5064334c.3fb76c"]]},{"id":"17a1b949.a767e7","type":"mqtt out","z":"7da00429.467ddc","name":"Publish sensor","topic":"","qos":"0","retain":"false","broker":"8a5b5094.2f7bb","x":1200,"y":220,"wires":[]},{"id":"2f04891b.f65796","type":"switch","z":"7da00429.467ddc","name":"Identify switch","property":"payload.state.buttonevent","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"false","repair":false,"outputs":2,"x":380,"y":380,"wires":[["848b7ecb.3f579"],["5387bab1.f228f4"]]},{"id":"ae621788.d2ae48","type":"switch","z":"7da00429.467ddc","name":"identify motion","property":"payload.state.presence","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":382,"y":60,"wires":[["cd490f7.3ef7bf"],["3eea8388.f5890c"]]},{"id":"3eea8388.f5890c","type":"switch","z":"7da00429.467ddc","name":"identify lightlevel","property":"payload.state.lightlevel","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":382,"y":100,"wires":[["50266bb1.a35cd4"],["11247bba.98cb54"]]},{"id":"11247bba.98cb54","type":"switch","z":"7da00429.467ddc","name":"identify contact","property":"payload.state.open","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":382,"y":140,"wires":[["cf24f527.dd1b18"],["454d7e92.076"]]},{"id":"454d7e92.076","type":"switch","z":"7da00429.467ddc","name":"identify temperature","property":"payload.state.temperature","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":402,"y":180,"wires":[["363ce753.462ff8"],["22fe5d5e.172e62"]]},{"id":"22fe5d5e.172e62","type":"switch","z":"7da00429.467ddc","name":"identify humidity","property":"payload.state.humidity","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":382,"y":220,"wires":[["46fcd980.827238"],["97504059.d326f"]]},{"id":"848b7ecb.3f579","type":"function","z":"7da00429.467ddc","name":"Deconz/switch/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/switch/\"+mac;\nnewmsg.payload = msg.payload.state.buttonevent;\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":380,"wires":[["17a1b949.a767e7"]]},{"id":"cd490f7.3ef7bf","type":"function","z":"7da00429.467ddc","name":"Deconz/motion/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/motion/\"+mac;\nif(msg.payload.state.presence === false){\n    newmsg.payload = \"CLOSED\";\n}else{\n    newmsg.payload = \"OPEN\";\n}\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":60,"wires":[["17a1b949.a767e7"]]},{"id":"50266bb1.a35cd4","type":"function","z":"7da00429.467ddc","name":"Deconz/lightlevel/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/lightlevel/\"+mac;\nnewmsg.payload = msg.payload.state.lux;\n\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":100,"wires":[["17a1b949.a767e7"]]},{"id":"cf24f527.dd1b18","type":"function","z":"7da00429.467ddc","name":"Deconz/contact/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/contact/\"+mac;\nif(msg.payload.state.open === false){\n    newmsg.payload = \"CLOSED\";\n}else{\n    newmsg.payload = \"OPEN\";\n}\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":140,"wires":[["17a1b949.a767e7"]]},{"id":"363ce753.462ff8","type":"function","z":"7da00429.467ddc","name":"Deconz/temperature/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/temperature/\"+mac;\nnewmsg.payload = msg.payload.state.temperature/100;\n\nreturn newmsg;","outputs":1,"noerr":0,"x":650,"y":180,"wires":[["9995ee21.7f2db"]]},{"id":"46fcd980.827238","type":"function","z":"7da00429.467ddc","name":"Deconz/humidity/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/humidity/\"+mac;\nnewmsg.payload = (msg.payload.state.humidity)/100;\n\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":220,"wires":[["17a1b949.a767e7"]]},{"id":"c4e35c62.82d46","type":"function","z":"7da00429.467ddc","name":"Deconz/fire/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/fire/\"+mac;\nif(msg.payload.state.presence === false){\n    newmsg.payload = \"CLOSED\";\n}else{\n    newmsg.payload = \"OPEN\";\n}\nreturn newmsg;","outputs":1,"noerr":0,"x":630,"y":260,"wires":[["17a1b949.a767e7"]]},{"id":"97504059.d326f","type":"switch","z":"7da00429.467ddc","name":"identify smoke","property":"payload.state.fire","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":380,"y":260,"wires":[["c4e35c62.82d46"],["2394b58e.c137ca"]]},{"id":"70feef3e.8a7d5","type":"function","z":"7da00429.467ddc","name":"Deconz/gas/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/gas/\"+mac;\nif(msg.payload.state.presence === false){\n    newmsg.payload = \"CLOSED\";\n}else{\n    newmsg.payload = \"OPEN\";\n}\nreturn newmsg;","outputs":1,"noerr":0,"x":630,"y":300,"wires":[["17a1b949.a767e7"]]},{"id":"2394b58e.c137ca","type":"switch","z":"7da00429.467ddc","name":"identify gas","property":"payload.state.alarm","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":370,"y":300,"wires":[["70feef3e.8a7d5"],["479c9f1d.3d94c"]]},{"id":"479c9f1d.3d94c","type":"switch","z":"7da00429.467ddc","name":"identify pressure","property":"payload.state.pressure","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":380,"y":340,"wires":[["6fb7b2bf.6366fc"],["2f04891b.f65796"]]},{"id":"6fb7b2bf.6366fc","type":"function","z":"7da00429.467ddc","name":"Deconz/pressure/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/pressure/\"+mac;\nnewmsg.payload = msg.payload.state.pressure/10;\n\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":340,"wires":[["cc8c59b9.6f9508"]]},{"id":"9995ee21.7f2db","type":"unit-converter","z":"7da00429.467ddc","category":"temperature","inputUnit":"C","outputUnit":"F","inputField":"payload","outputField":"payload","inputFieldType":"msg","outputFieldType":"msg","name":"Temp Convert","x":900,"y":220,"wires":[["17a1b949.a767e7"]]},{"id":"cc8c59b9.6f9508","type":"unit-converter","z":"7da00429.467ddc","category":"pressure","inputUnit":"kPa","outputUnit":"torr","inputField":"payload","outputField":"payload","inputFieldType":"msg","outputFieldType":"msg","name":"Press Convert","x":900,"y":300,"wires":[["17a1b949.a767e7"]]},{"id":"5064334c.3fb76c","type":"switch","z":"7da00429.467ddc","name":"Is Config","property":"payload.config","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":360,"y":20,"wires":[["4ab28ba.80e9f74"],["ae621788.d2ae48"]]},{"id":"4ab28ba.80e9f74","type":"function","z":"7da00429.467ddc","name":"Deconz/battery/{{uniqueid}}","func":"// Needs to be adjusted\nvar newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/battery/\"+mac;\nnewmsg.payload = msg.payload.config.battery;\n\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":20,"wires":[["17a1b949.a767e7"]]},{"id":"5387bab1.f228f4","type":"switch","z":"7da00429.467ddc","name":"Identify Daylight","property":"payload.state.status","propertyType":"msg","rules":[{"t":"nnull"},{"t":"else"}],"checkall":"false","repair":false,"outputs":2,"x":380,"y":420,"wires":[["634af866.19d1e8"],[]]},{"id":"634af866.19d1e8","type":"function","z":"7da00429.467ddc","name":"Deconz/daylight/{{uniqueid}}","func":"var newmsg = {};\nvar mac = msg.payload.uniqueid.substring(0, 23);\nnewmsg.payload = {};\nnewmsg.topic = {};\nnewmsg.topic = \"Deconz/switch/\"+mac;\nif(msg.payload.state.status === 100){\n    newmsg.payload = \"NADIR\";\n}\nif(msg.payload.state.status === 110){\n    newmsg.payload = \"NIGHT_END\";\n}\nif(msg.payload.state.status === 120){\n        newmsg.payload = \"NAUTICAL_DAWN\";\n}\nif(msg.payload.state.status === 130){\n    newmsg.payload = \"DAWN\";\n}\nif(msg.payload.state.status === 140){\n    newmsg.payload = \"SUNRISE_START\";\n}\nif(msg.payload.state.status === 150){\n    newmsg.payload = \"SUNRISE_END\";\n}\nif(msg.payload.state.status === 160){\n    newmsg.payload = \"GOLDENHOUR1\";\n}\nif(msg.payload.state.status === 170){\n    newmsg.payload = \"GOLDENHOUR2\";\n}\nif(msg.payload.state.status === 180){\n    newmsg.payload = \"SUNSET_START\";\n}\nif(msg.payload.state.status === 190){\n    newmsg.payload = \"SUNSET_END\";\n}\nif(msg.payload.state.status === 200){\n    newmsg.payload = \"SUNSET_END\";\n}\nif(msg.payload.state.status === 210){\n    newmsg.payload = \"DUSK\";\n}\nif(msg.payload.state.status === 220){\n    newmsg.payload = \"NAUTICAL_DUSK\";\n}\nif(msg.payload.state.status === 230){\n    newmsg.payload = \"NIGHT_START\";\n}\nreturn newmsg;","outputs":1,"noerr":0,"x":640,"y":420,"wires":[["17a1b949.a767e7"]]},{"id":"cb1bee35.eb442","type":"websocket-client","z":"","path":"ws://192.168.1.62:81","tls":"","wholemsg":"false"},{"id":"8a5b5094.2f7bb","type":"mqtt-broker","z":"","name":"","broker":"192.168.1.200","port":"1883","clientid":"","usetls":false,"compatmode":true,"keepalive":"60","cleansession":true,"birthTopic":"NodeRed","birthQos":"0","birthPayload":"Connected","closeTopic":"NodeRed","closePayload":"Disconnected","willTopic":"","willQos":"0","willPayload":""}]

cweitkamp · January 20, 2019, 11:34am

I am not sure why your configuration is not working. Maybe you should wait for the next milestone build which includes my latest changes to support reading both values with combined in one thing. The build will be released (very) soon.

Edit: It has been released earlier this day.

Hey_Jonny · January 29, 2019, 6:08am

Hey,

I want to get back to the topic of the thread.
I have the same issue, that the bringe is not auto-discovered by the binding. It also does not work when I try to add it automatically without entering an API, but activating the 3rd-party-app thing at the bridge.

Are there any news about the bugfix for the broken auto detection
Where do I find the API, so I can add the bridge manually (I’m really a newbie here, don’t even find, where to enter a textural command)

Hope, you can help me,

Pascal

dark_mc · January 29, 2019, 6:30am

Hello

Thanks to all contributors for the great work done with the Deconz Binding!

I got the ConBee stick this weekend and its up and running since Sunday (trying it because TRADFRI Hub or Binding is not stable, 2x comm error per day). Yesterday I realised, that I’m experiencing the Idle/timeout error too…

2019-01-29 07:05:57.518 [hingStatusInfoChangedEvent] - 'deconz:deconz:abc' changed from ONLINE to OFFLINE (COMMUNICATION_ERROR): Idle timeout expired: 300001/300000 ms
2019-01-29 07:05:57.527 [hingStatusInfoChangedEvent] - 'deconz:deconz:abc' changed from OFFLINE (COMMUNICATION_ERROR): Idle timeout expired: 300001/300000 ms to OFFLINE (COMMUNICATION_ERROR): Idle Timeout
2019-01-29 07:05:57.544 [hingStatusInfoChangedEvent] - 'deconz:deconz:abc' changed from OFFLINE (COMMUNICATION_ERROR): Idle Timeout to ONLINE

I’m on OH 2.4 stable.

I was reading the thread but as I understood, there is no solution for that until now, right?

Thanks a lot.

Jan

David_Graeff · January 29, 2019, 7:37am

Both mentioned problems have not been tackled yet.

Cheers David

Hey_Jonny · January 29, 2019, 2:46pm

Thank you for the fast reply. So I will wait for a bugfix for this issue.

But could you tell me, how I can add the deCONZ manually. If I understood the posts above correctly , this works for some … However, I have no idea where I can find the API. And do I need to enter the IP with or without port number of the deCONZ?
I guess, these are silly questions, but I didn’t find a how-to so far… I hope, you can help me

Pascal

David_Graeff · January 29, 2019, 7:07pm

You need to enter the ip and port. The deconz software manual should help you to find the IP and port.

hehold · February 2, 2019, 9:55am

I’ve tested now with the M1 release and it is working fine with just the consumptionsensor and

Number:Power   bitronsd01_watt  "B Verbrauch    [%.0f %unit%]"      {channel="deconz:consumptionsensor:homeserver:bitronsd01_c1:power"} 
Number:Energy  bitronsd01_cons  "B Cons         [%.0f %unit%]"      {channel="deconz:consumptionsensor:homeserver:bitronsd01_c1:consumption"}

Thanks a lot!

hehold · February 4, 2019, 9:47am

Receiving data from deconz is working fine now, but I’ve run into the next problem. Now that I have the data, I want to send it to KNX. Unfortunately this is not working and I’m not sure if this is an issue of the deconz binding or somewhere else in OH. Maybe someone has an idea where to look at…

Sending data to KNX is actually working as I have managed to send NTP data to KNX, but it is not working for data coming from deconz. This is my setup:

      Thing device knx_virtual "KNX-virtual"  {  
        Type datetime-control : date              [ ga="11.001:0/7/11" ]  
        Type datetime-control : time              [ ga="10.001:0/7/10" ] 
        Type number-control   : knx_sz_humidity   [ ga="5.001:0/1/77" ]
        Type number-control   : knx_sz_temp       [ ga="9.001:0/1/79" ]        
      }

I have tried different syntax and order for the items, but no luck so far:

DateTime              knxDate "KNX Datum [%1$tA, %1$td.%1$tm.%1$tY %1$tH:%1$tM]" { channel="ntp:ntp:local:dateTime,knx:device:bridge:knx_virtual:date,knx:device:bridge:knx_virtual:time" }
Number:Temperature    sz_temp_i       "SZ Temp [%.0f %unit%]"  <temperature>     { channel="deconz:temperaturesensor:homeserver:sz_temp:temperature",channel="knx:device:bridge:knx_virtual:knx_sz_temp" }
Number:Dimensionless  sz_humidity_i   "SZ Feuchtigkeit [%.2f %unit%]"            { channel="deconz:humiditysensor:homeserver:sz_humidity:humidity,knx:device:bridge:knx_virtual:knx_sz_humidity" }

I can see in the logs that the values are changing, but only the date is forwarded to KNX:

2019-02-04 10:27:04.500 [vent.ItemStateChangedEvent] - knxDate changed from 2019-02-04T10:26:04.456+0100 to 2019-02-04T10:27:04.465+0100
2019-02-04 10:27:31.477 [vent.ItemStateChangedEvent] - sz_temp_i changed from 21.37 °C to 21.36 °C
2019-02-04 10:27:31.523 [vent.ItemStateChangedEvent] - sz_humidity_i changed from 41.75 % to 41.71 %

When I send a read request from KNX, it is received by OH but no response is sent:

2019-02-04 09:57:49.786 [ome.event.ItemCommandEvent] - Item 'sz_humidity_i' received command REFRESH

Any ideas what’s wrong or where to continue troubleshooting?

jannodeluxe · April 4, 2019, 8:34pm

is there anything new on the issue “(COMMUNICATION_ERROR): Idle timeout expired: 300000/300000 ms to OFFLINE”?

Any workaround to solve this?

David_Graeff · April 4, 2019, 9:28pm

I have created a possible fix:

jannodeluxe · April 5, 2019, 5:56am

Hi David,

thanks for your reply. So is it only to replace the “DeconzBridgeHandler.java” or is it to insert a qhole deconz binding jar?