This is my first post here. I’m a new user to OpenHab as I’m switching away from a VeraPlus (previously Veralite). I’ve successfully moved most of my z-wave devices from my VeraPlus to my Aeotech Z-Stick Gen 5 and added all the devices as Things/Items to my OpenHab 2.4 installation (aptitude install on a Raspberry Pi 3). I’m having an issue with some Enerwave ZW15RM devices; they are showing as ZW20RM (ZW20RM In-wall Smart Meter Duplex Receptacle). For the most part this should be fine as the ZW20RM is a binary switch identical to the ZW15RM, except it’s a 20 amp receptacle. The problem seems to be that it shows with a dimmer channel instead of a Switch channel.
I have ZW15R receptacles that showed as ZW20R which work even though they show as the 20 amp device, so I’m guessing that if the ZW20RM’s Dimmer channel was changed to a Switch channel, all should work as well. I did try to flip the Dimmer ON/OFF switch in Openhab, but it does not turn on the device as I’m guessing it sends the wrong codes to the receptacle. I had a look at the xml file to see if it was an easy fix, but I’m not sure what to change, and if I should even be changing that since it’s getting the bindings from a database.
Any help would be greatly appreciated.