# EnOcean 2: FGW14-USB supported

**URL:** <https://community.openhab.org/t/enocean-2-fgw14-usb-supported/60213>\
**Category:** Home Automation\
**Created:** [December 18, 2018, 3:05pm UTC](https://community.openhab.org/t/enocean-2-fgw14-usb-supported/60213 "2018-12-18T15:05:25Z")\
**Posts on this page:** 1\
**Showing post:** 64

<div class="post-metadata">

**Author:** ![ErikDB](https://community.openhab.org/letter_avatar_proxy/v4/letter/e/ac8455/32.png) [@ErikDB](https://community.openhab.org/u/ErikDB)\
**Post date:** [January 17, 2024, 7:04pm UTC](https://community.openhab.org/t/enocean-2-fgw14-usb-supported/60213/64 "2024-01-17T19:04:01Z")

</div>

> [@flysl88](#):
>
> It consists of two independet Eltako Busses, one starting with a FAM14, the other starting with a FTS14KS.

Hey @flysl88, It looks like I’ll need two setups as well, both with FTS14KS (as well as F4SR14-LED, FTS14EM and FGW14-USB). Since these setups are wired, they operate a bit differently from the setup with FAM14, as decribed here: [Beginners guide for implementing Eltako FSR14, FSB14, FUD14 via FGW14](https://community.openhab.org/t/beginners-guide-for-implementing-eltako-fsr14-fsb14-fud14-via-fgw14/136872/1).

Is there anything from that ‘guide’ you remember is different for a FTS14KS system?

---

_[View the full topic](https://community.openhab.org/t/enocean-2-fgw14-usb-supported/60213)._