EspMilightHub and signal quality/strength

[matt1 (Skinah)]

I suggest you ask this on the GitHub project for the hub.

Also this post may be of interest.

EspMilightHub new binding for milight limitlessLED and easybulb

OK results of my hardware testing are: When trying different chinese sourced NRF boards, the versions with PA+LNA use a LOT more power than boards without the PA+LNA features, really not surprising. What did surprise me was the chinese made LoLin nodemcu V3 board I am using can not power some of them at all. When trying to get them running the thing to look out for is the LED on the esp8266 sub board. If you press the reset button on the nodeMCU you will notice a small LED flashes. When you try…