OpenHab run on a server that may be used without access to internet. It reads an energy meter with an ESP8266 microcontroller that reports meter values via mqtt over wifi. Each hour the meter reports accurate time in a string (“yyyy-mm-dd hh:mm:ss”). The following rule in meant to set the system ti…

Why not use an ntp server and the functionality built in to the OS? That is the proper solution for accurate time. If you are trying to sync with a device that has an incorrect time, fix that device.

[image] perody: Is there a better way to update the system time from a rule? Why use a rule? openhabian includes NTP that should sync time automatically.

@Josar . Thanks, I will try that

@mstormi , @Bruce_Osborne : I should have explained the situation better. If connected to internet, ntp is better. The need is when the server is not connected to internet. In that case, the time data from the meter should be used. The problem description is updated.

[image] perody: the time data from the meter should be used. Is it an accurate time source? Is it possibly for that device to act as an ntp server?

@Bruce_Osborne : The meter is an accurate time source, but not possible to use as an ntp server. It delivers a string every hour with correct local time.

openHAB Community

executeCommandLine to change system time

Setup, Configuration and Use Scripts & Rules

Josar (Josar) January 1, 2020, 1:02pm 2

You could try this:

https://community.openhab.org/t/openhab-sudo-exec-binding

Also the quotes with doubled qoutes could be an issue.