# Group Alarms Fibaro FGSD002

**URL:** <https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438>\
**Category:** Home Automation\
**Created:** [October 24, 2017, 7:45am UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438 "2017-10-24T07:45:02Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 24, 2017, 7:45am UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/1 "2017-10-24T07:45:02Z")

</div>

Hi,

I’m running two Fibaro FGSD002 Smoke Sensors. I receive all alarms. I can readout Battery Level and so on.  
The only thing I can’t get working is, that I get “Group Alarms” working.  
I tried to set the “associated groups” (2 and 4) “crossover” (Smokesensor 1 is in associated group of Smokesensor 2 and vice versa)  
Unfourtnately I couldn’t get it work if Sensor 1 has an Smoke Alert that Sensor 2 is alarming. I also tried to set the controller in association group 2 and 4 without success.

Is it possible, that this doesn’t work, because the device is “sleeping”?  
Do I need a separate siren for alarming?

Screenshots of both Smoke sensors (ZWave Nodes 11 and 12) with current configuration

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/0/4/04470a015543520c5d3eda277293a91af849c7cf.png)

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/9/0/90b85a5862efd8716bb343bfe0514a6b6d135831.png)

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 24, 2017, 8:39am UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/2 "2017-10-24T08:39:42Z")

</div>

> [@helmar74](#):
>
> Unfourtnately I couldn’t get it work if Sensor 1 has an Smoke Alert that Sensor 2 is alarming.

I doubt this is possible. These sensors are battery devices and not FLiRS (unless this has changed recently) so they are asleep most of the time and therefore you can’t send a message TO them.

> [@helmar74](#):
>
> Do I need a separate siren for alarming?

Yes, this is probably the best option.

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 12:39pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/3 "2017-10-27T12:39:53Z")

</div>

Hi, thanks for the info.  
I ordered a Popp 4001 Smoke Detector with Siren. I do have a strange behaviour.  
The Smoke Detector is joined into Z-Wave Network. I can recevice alarms, batterystatus and i also can switch on siren.  
After (a few Minutes) the Smoke Sensors stopps communicating with Z-Wave Sensor. When I hit the test button, the sensor again works fine for a few minutes, afterwards → same error..  
The Smoke Sensor is marked like this:

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/7/5/755fe4e57321803960d56164b148126239773a32.png)

Do you have any idea, whats going wrong?

Update: The Popp Support advised me to turn off polling. But I don’t find a switch for that.  
I can only increase or decrease polling intervall…

Here’s the log, when i push the Z-Wave Button of the Device  
017-10-27 16:17:51.048 [ItemStateChangedEvent] - TaupunktAussen changed from 4.66 to 4.74  
2017-10-27 16:18:33.993 [BindingEvent] - org.openhab.binding.zwave.event.BindingEvent@af2807  
2017-10-27 16:18:34.006 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from OFFLINE: Node not found in Z-Wave network to ONLINE: Node initialising: EMPTYNODE  
2017-10-27 16:18:34.173 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: EMPTYNODE to ONLINE: Node initialising: PROTOINFO  
2017-10-27 16:18:34.204 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: PROTOINFO to ONLINE: Node initialising: INIT\_NEIGHBORS  
2017-10-27 16:18:34.245 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: FAILED\_CHECK to ONLINE: Node initialising: DISCOVERY\_COMPLETE  
2017-10-27 16:18:34.247 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: INIT\_NEIGHBORS to ONLINE: Node initialising: FAILED\_CHECK  
2017-10-27 16:18:34.260 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: DISCOVERY\_COMPLETE to ONLINE: Node initialising: PROTOINFO  
2017-10-27 16:18:34.296 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: PROTOINFO to ONLINE: Node initialising: INIT\_NEIGHBORS  
2017-10-27 16:18:34.323 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: INIT\_NEIGHBORS to ONLINE: Node initialising: FAILED\_CHECK  
2017-10-27 16:18:34.340 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: FAILED\_CHECK to ONLINE: Node initialising: WAIT  
2017-10-27 16:18:49.135 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE: Node initialising: WAIT to ONLINE

If I want to turn on siren:  
7-10-27 16:20:53.104 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE to OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller  
2017-10-27 16:20:56.341 [ItemCommandEvent] - Item ‘i\_zwave\_16\_Sirene’ received command OFF  
2017-10-27 16:20:56.350 [ItemStateChangedEvent] - i\_zwave\_16\_Sirene changed from ON to OFF

And than the device is offline again

Thanks a lot

Regards

Helmar

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 3:02pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/4 "2017-10-27T15:02:25Z")

</div>

So I brought Device Online at

Last Time Online at 16:23:46.794:

2017-10-27 16:23:46.794 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller to ONLINE

After 30 Minutes (which is the standard polling interval) the device went offline again:

2017-10-27 16:52:14.364 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE to OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller

I think polling is the issue, how can I turn off polling for that device???  
This are the options for the device:

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/2/f/2f30d26f3332b17883055f497d20b64fe816c35c.png)

Thanks a lot

Helmar

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 3:16pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/5 "2017-10-27T15:16:08Z")

</div>

Reduced Polling interval to 10 minutes, the Device went offline after exactly 10 minutes:

2017-10-27 16:58:03.818 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller to ONLINE  
2017-10-27 17:04:44.941 [ThingUpdatedEvent] - Thing ‘zwave:device:020e4758:node16’ has been updated.  
(Reduced Polling to 10 minutes)  
2017-10-27 17:14:58.387 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE to OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 3:20pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/6 "2017-10-27T15:20:16Z")

</div>

The device is (I assume) a battery device, so I assume it is reporting as “listening = false” in HABmin? If so, it should not poll until the device wakes up.

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 3:22pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/7 "2017-10-27T15:22:17Z")

</div>

Hi thanks a lot.  
Yes is a battery device:

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/8/c/8c86764b03152e91565969d37cb1d909ceaee7d1.png)

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 3:24pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/8 "2017-10-27T15:24:30Z")

</div>

Maybe an error in the binding?  
I reduced polling to 0, that was how the binding reacted:

 ![image](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/8/e/8ef2ac29e9f77a82567b992d9d84562794c36b9f.png)

That was the behaviour:  
2017-10-27 17:21:59.174 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller to ONLINE  
2017-10-27 17:22:17.149 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE to OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller

Changed Polling to 1 hour… waiting 😉

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 3:26pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/9 "2017-10-27T15:26:15Z")

</div>

> [@helmar74](#):
>
> I reduced polling to 0

I think this is not allowed. I think the value needs to be between 15 seconds and 2 days from memory.

Looking at the attributes, it shows it’s not a listening device, so it shouldn’t try and send to the device unless the device is awake. I would suggest to get a debug log to see what is happening.

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 3:47pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/10 "2017-10-27T15:47:35Z")

</div>

OK, I’ll provide during the weekend.  
… should I test excluding and including the device again?

What must I do to exclude? (I’ve never done that)  
I know which button to press on the device, but I don’t know how to exclude from openhab…

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 4:26pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/11 "2017-10-27T16:26:52Z")

</div>

Exactly after an hour it went offline again:

2017-10-27 17:23:40.862 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller to ONLINE  
.  
.  
2017-10-27 18:23:32.086 [hingStatusInfoChangedEvent] - ‘zwave:device:020e4758:node16’ changed from ONLINE to OFFLINE (COMMUNICATION\_ERROR): Node is not communicating with controller

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 4:29pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/12 "2017-10-27T16:29:50Z")

</div>

> [@helmar74](#):
>
> What must I do to exclude?

There’s no need to exclude the device.

I’d suggest to stop the binding, delete the XML for this node (in the {userdata}/zwave folder) and then restart the binding. Set polling to 30 seconds and let’s see what it shows.

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 5:13pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/13 "2017-10-27T17:13:00Z")

</div>

Logfile has 7 MB how can i upload?  
(is limited to 1MB)

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 5:19pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/14 "2017-10-27T17:19:02Z")

</div>

File uploaded  
[https://www.file-upload.net/download-12784845/openhab.log.html](https://www.file-upload.net/download-12784845/openhab.log.html)

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 5:46pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/15 "2017-10-27T17:46:07Z")

</div>

Unfortunately the file has no zwave debug logging in it (lots of other debug though which is why the file is so big). To enable debug logging, use the following command.

```auto
log:set debug org.openhab.binding.zwave

```

You might want to see if you can disable some of the other logging otherwise the file might get quite large.

For reference -:  
[http://docs.openhab.org/administration/logging.html](http://docs.openhab.org/administration/logging.html)

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 5:51pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/16 "2017-10-27T17:51:13Z")

</div>

But the logging is than stored in /var/log/openhab2/openhab.log ?

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 5:51pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/17 "2017-10-27T17:51:33Z")

</div>

Yes.

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 5:52pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/18 "2017-10-27T17:52:04Z")

</div>

I’m wondering, as a switched log:set Debug…

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [October 27, 2017, 5:52pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/19 "2017-10-27T17:52:29Z")

</div>

Sorry - I don’t know what you mean?

---

<div class="post-metadata">

**Author:** ![helmar74](https://community.openhab.org/user_avatar/community.openhab.org/helmar74/32/7319_2.png) [@helmar74](https://community.openhab.org/u/helmar74)\
**Post date:** [October 27, 2017, 5:54pm UTC](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438/20 "2017-10-27T17:54:35Z")

</div>

I started karraf shell and switched to:  
log:set Debug

I think, that should have turned on Debugging also for zwave…

If I turn on logging like that:  
log:set debug org.openhab.binding.zwave

How do I switch back to warning?  
Is it:  
log:set warn org.openhab.binding.zwave

[Next page](https://community.openhab.org/t/group-alarms-fibaro-fgsd002/35438.md?page=2)
