[Harmony Binding] logging starting of an activity

The Actual Binding (binding-harmonyhub - 2.0.0.SNAPSHOT) creates only one Channel for the Harmony Hub (Current Activity). It changes the State from “PowerOff” to “WatchTV” after the hub finished all operations (same if i use the channel “activity”. i´m sure that the hub delivers this information, but the binding is not showing it on the channel.

I moved over from FHEM and there the Channel “current Activity” also showed if a Action is starting…

for example you can see it in this logfile: http://www.meintechblog.de/wordpress/wp-content/uploads/2015/08/FHEM-Eventmonitor-starting.jpg

It is very popular for FHEM users to turn on the socket after an activity is started. In the harmony software all signals are delayed so that all devices had time to get power before the harmony hub starts to send IR Signals to turn on the devices.

My English is not very good but hopefully everybody unterstand what i mean. Here is the german manual how i solved it in FHEM. Now i want to do it in OPENHAB 2: http://www.fhemwiki.de/wiki/Harmony#Vorgeschaltete_Funksteckdose_ansteuern