Hello all,
The on/off-setting channel does not seem to work any longer. I can see that the none-lifeline-ass groups that were the before have been exchanged for a new “On/Off control”.
The channel is reporting:
I get both:
2018-11-10 03:12:09.463 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 8: Basic report, value = 255
2018-11-10 03:12:09.467 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_BASIC, value = 255
and a:
2018-11-10 03:12:09.470 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:basic_switch_binary to ON [OnOffType]
The Item bound to hte “zwave:device:512:node8:basic_switch_binary”-channel is just not getting updated.
all log for one physical change:
2018-11-10 03:22:11.409 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 08 06 43 03 0B 22 00 C3 53
2018-11-10 03:22:11.412 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 06 43 03 0B 22 00 C3
2018-11-10 03:22:11.414 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 06 43 03 0B 22 00 C3
2018-11-10 03:22:11.416 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:22:11.417 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Application Command Request (ALIVE:DONE)
2018-11-10 03:22:11.419 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: resetResendCount initComplete=true isDead=false
2018-11-10 03:22:11.421 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Incoming command class COMMAND_CLASS_THERMOSTAT_SETPOINT, endpoint 0
2018-11-10 03:22:11.422 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY not supported
2018-11-10 03:22:11.424 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Received COMMAND_CLASS_THERMOSTAT_SETPOINT V1 THERMOSTAT_SETPOINT_REPORT
2018-11-10 03:22:11.425 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint report Scale = 0
2018-11-10 03:22:11.427 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint Value = 19.5
2018-11-10 03:22:11.429 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint Report, Type Heating Economical (11), value = 19.5
2018-11-10 03:22:11.430 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveThermostatSetpointValueEvent
2018-11-10 03:22:11.432 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_THERMOSTAT_SETPOINT, value = 19.5
2018-11-10 03:22:11.434 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:thermostat_setpoint_heating_econ to 19.5 °C [QuantityType]
2018-11-10 03:22:11.437 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Commands processed 1.
2018-11-10 03:22:11.439 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@f78c50.
2018-11-10 03:22:11.448 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:22:11.450 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:22:11.451 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2018-11-10 03:22:11.454 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2018-11-10 03:22:21.842 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 0F 06 31 05 01 22 00 E6 0F
2018-11-10 03:22:21.845 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=15, callback=0, payload=00 0F 06 31 05 01 22 00 E6
2018-11-10 03:22:21.849 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=15, callback=0, payload=00 0F 06 31 05 01 22 00 E6
2018-11-10 03:22:21.851 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:22:21.852 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 15: Application Command Request (ALIVE:DONE)
2018-11-10 03:22:21.854 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 15: resetResendCount initComplete=true isDead=false
2018-11-10 03:22:21.856 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 15: Incoming command class COMMAND_CLASS_SENSOR_MULTILEVEL, endpoint 0
2018-11-10 03:22:21.858 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 15: SECURITY not supported
2018-11-10 03:22:21.860 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 15: Received COMMAND_CLASS_SENSOR_MULTILEVEL V6 SENSOR_MULTILEVEL_REPORT
2018-11-10 03:22:21.862 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 15: Sensor Type = Temperature(1), Scale = 0
2018-11-10 03:22:21.864 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 15: Sensor Value = 23
2018-11-10 03:22:21.867 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 15: Got an event from Z-Wave network: ZWaveMultiLevelSensorValueEvent
2018-11-10 03:22:21.869 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 15: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_SENSOR_MULTILEVEL, value = 23
2018-11-10 03:22:21.872 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 15: Commands processed 1.
2018-11-10 03:22:21.873 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 15: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@10e128.
2018-11-10 03:22:21.876 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:22:21.877 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:22:21.880 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2018-11-10 03:22:21.881 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2018-11-10 03:23:01.569 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 08 03 20 01 FF 27
2018-11-10 03:23:01.577 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 03 20 01 FF
2018-11-10 03:23:01.581 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 03 20 01 FF
2018-11-10 03:23:01.584 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:23:01.587 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Application Command Request (ALIVE:DONE)
2018-11-10 03:23:01.590 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: resetResendCount initComplete=true isDead=false
2018-11-10 03:23:01.592 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Incoming command class COMMAND_CLASS_BASIC, endpoint 0
2018-11-10 03:23:01.595 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY not supported
2018-11-10 03:23:01.598 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Received COMMAND_CLASS_BASIC V1 BASIC_SET
2018-11-10 03:23:01.600 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 8: Basic report, value = 255
2018-11-10 03:23:01.603 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-11-10 03:23:01.606 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_BASIC, value = 255
2018-11-10 03:23:01.609 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:basic_switch_binary to ON [OnOffType]
2018-11-10 03:23:01.614 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Commands processed 1.
2018-11-10 03:23:01.617 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@e73272.
2018-11-10 03:23:01.619 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:01.622 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:01.624 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2018-11-10 03:23:01.628 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2018-11-10 03:23:10.286 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 14 00 04 00 28 0E 32 02 21 24 00 00 02 66 00 00 00 00 00 00 98
2018-11-10 03:23:10.291 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=40, callback=0, payload=00 28 0E 32 02 21 24 00 00 02 66 00 00 00 00 00 00
2018-11-10 03:23:10.295 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=40, callback=0, payload=00 28 0E 32 02 21 24 00 00 02 66 00 00 00 00 00 00
2018-11-10 03:23:10.297 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:23:10.299 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Application Command Request (ALIVE:DONE)
2018-11-10 03:23:10.301 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: resetResendCount initComplete=true isDead=false
2018-11-10 03:23:10.303 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Incoming command class COMMAND_CLASS_METER, endpoint 0
2018-11-10 03:23:10.304 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: SECURITY NOT required on COMMAND_CLASS_METER
2018-11-10 03:23:10.307 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Received COMMAND_CLASS_METER V3 METER_REPORT
2018-11-10 03:23:10.308 [DEBUG] [.commandclass.ZWaveMeterCommandClass] - NODE 40: Meter: Type=Electric(1), Scale=kWh(0), Value=61.4
2018-11-10 03:23:10.311 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Got an event from Z-Wave network: ZWaveMeterValueEvent
2018-11-10 03:23:10.312 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_METER, value = 61.4
2018-11-10 03:23:10.313 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 18 00 04 00 28 12 60 0D 00 01 32 02 21 24 00 00 02 66 00 00 00 00 00 00 E4
2018-11-10 03:23:10.315 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Updating channel state zwave:device:512:node40:meter_kwh to 61.4 [DecimalType]
2018-11-10 03:23:10.320 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=40, callback=0, payload=00 28 12 60 0D 00 01 32 02 21 24 00 00 02 66 00 00 00 00 00 00
2018-11-10 03:23:10.321 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Commands processed 1.
2018-11-10 03:23:10.324 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@c8ae37.
2018-11-10 03:23:10.326 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:10.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:10.331 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=40, callback=0, payload=00 28 12 60 0D 00 01 32 02 21 24 00 00 02 66 00 00 00 00 00 00
2018-11-10 03:23:10.332 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:23:10.334 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Application Command Request (ALIVE:DONE)
2018-11-10 03:23:10.336 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: resetResendCount initComplete=true isDead=false
2018-11-10 03:23:10.338 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Decapsulating COMMAND_CLASS_MULTI_CHANNEL
2018-11-10 03:23:10.339 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: Incoming command class COMMAND_CLASS_METER, endpoint 0
2018-11-10 03:23:10.342 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 40: SECURITY NOT required on COMMAND_CLASS_METER
2018-11-10 03:23:10.343 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 40: Received COMMAND_CLASS_METER V3 METER_REPORT
2018-11-10 03:23:10.345 [DEBUG] [.commandclass.ZWaveMeterCommandClass] - NODE 40: Meter: Type=Electric(1), Scale=kWh(0), Value=61.4
2018-11-10 03:23:10.347 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Got an event from Z-Wave network: ZWaveMeterValueEvent
2018-11-10 03:23:10.349 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_METER, value = 61.4
2018-11-10 03:23:10.351 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 40: Updating channel state zwave:device:512:node40:meter_kwh to 61.4 [DecimalType]
2018-11-10 03:23:10.357 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Commands processed 1.
2018-11-10 03:23:10.359 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 40: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@853bb2.
2018-11-10 03:23:10.361 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:10.363 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:10.364 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2018-11-10 03:23:10.366 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2018-11-10 03:23:12.604 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 08 06 43 03 0B 22 00 D7 47
2018-11-10 03:23:12.613 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 06 43 03 0B 22 00 D7
2018-11-10 03:23:12.616 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 06 43 03 0B 22 00 D7
2018-11-10 03:23:12.618 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:23:12.620 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Application Command Request (ALIVE:DONE)
2018-11-10 03:23:12.622 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: resetResendCount initComplete=true isDead=false
2018-11-10 03:23:12.624 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Incoming command class COMMAND_CLASS_THERMOSTAT_SETPOINT, endpoint 0
2018-11-10 03:23:12.626 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY not supported
2018-11-10 03:23:12.628 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Received COMMAND_CLASS_THERMOSTAT_SETPOINT V1 THERMOSTAT_SETPOINT_REPORT
2018-11-10 03:23:12.630 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint report Scale = 0
2018-11-10 03:23:12.632 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint Value = 21.5
2018-11-10 03:23:12.634 [DEBUG] [.ZWaveThermostatSetpointCommandClass] - NODE 8: Thermostat Setpoint Report, Type Heating Economical (11), value = 21.5
2018-11-10 03:23:12.636 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveThermostatSetpointValueEvent
2018-11-10 03:23:12.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_THERMOSTAT_SETPOINT, value = 21.5
2018-11-10 03:23:12.640 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:thermostat_setpoint_heating_econ to 21.5 °C [QuantityType]
2018-11-10 03:23:12.646 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Commands processed 1.
==> /var/log/openhab2/events.log <==
2018-11-10 03:23:12.650 [vent.ItemStateChangedEvent] - FF_Sov2_Heating_Econ changed from 19.5 to 21.5
==> /var/log/openhab2/openhab.log <==
2018-11-10 03:23:12.649 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@11794eb.
2018-11-10 03:23:12.653 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:12.656 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:12.658 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2018-11-10 03:23:12.660 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2018-11-10 03:23:24.642 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 08 03 40 03 0B B1
2018-11-10 03:23:24.646 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 03 40 03 0B
2018-11-10 03:23:24.650 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=8, callback=0, payload=00 08 03 40 03 0B
2018-11-10 03:23:24.652 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2018-11-10 03:23:24.654 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Application Command Request (ALIVE:DONE)
2018-11-10 03:23:24.656 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: resetResendCount initComplete=true isDead=false
2018-11-10 03:23:24.663 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: Incoming command class COMMAND_CLASS_THERMOSTAT_MODE, endpoint 0
2018-11-10 03:23:24.665 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 8: SECURITY not supported
2018-11-10 03:23:24.668 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 8: Received COMMAND_CLASS_THERMOSTAT_MODE V1 THERMOSTAT_MODE_REPORT
2018-11-10 03:23:24.670 [DEBUG] [lass.ZWaveThermostatModeCommandClass] - NODE 8: Thermostat Mode report, value = 11
2018-11-10 03:23:24.672 [DEBUG] [lass.ZWaveThermostatModeCommandClass] - NODE 8: Thermostat Mode Report, value = Heat Econ
2018-11-10 03:23:24.675 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-11-10 03:23:24.677 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Got a value event from Z-Wave network, endpoint = 0, command class = COMMAND_CLASS_THERMOSTAT_MODE, value = 11
2018-11-10 03:23:24.680 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:thermostat_mode to 11 [DecimalType]
2018-11-10 03:23:24.685 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Commands processed 1.
2018-11-10 03:23:24.690 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 8: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@4a4499.
2018-11-10 03:23:24.692 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:24.696 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2018-11-10 03:23:24.698 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
Commands like this one and similar once for “off” are also coming now at times when the physical relay is no switching.
2018-11-10 03:28:00.558 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 8: Updating channel state zwave:device:512:node8:basic_switch_binary to ON [OnOffType]
Like this with no relay change.
@chris: Do you know anything about changes done to this thing?
All others: Is the basic_switch_binary working for you guys?