I am having trouble getting the Fibaro Flood Sensor (FGFS-101) to work with my setup even though I followed the recommended setup from the Wiki (https://github.com/openhab/openhab/wiki/Z-wave-Binding-Examples):
Contact coFibFlood_Alarm “Water-Sensor: [MAP(water.map):%s]” { zwave=“11:command=SENSOR_ALARM, alarm_type=5,respond_to_basic=TRUE” }
Below is my item definition:
Contact cEjectorPumpFlood “Ejector Pump Flood Sensor: [MAP(flood_sensor.map):%s]” (gFloodSensor) {zwave=“21:command=SENSOR_ALARM,alarm_type=5,respond_to_basic=TRUE”}
And it looks like the sensor is properly associated because the Zwave debug log shows NODE 21 changing the value of alarm type 5 when I dunked the sensor in water:
2016-12-01 19:04:21.113 [DEBUG] [z.i.p.c.ZWaveAlarmCommandClass:112 ]- NODE 21: Alarm Type = Flood (5)
2016-12-01 19:04:21.114 [DEBUG] [.z.internal.ZWaveActiveBinding:450 ]- NODE 21: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 2
2016-12-01 19:04:24.145 [DEBUG] [ApplicationCommandMessageClass:38 ]- NODE 21: Application Command Request (ALIVE:DONE)
2016-12-01 19:04:24.146 [DEBUG] [ApplicationCommandMessageClass:56 ]- NODE 21: Incoming command class ALARM
2016-12-01 19:04:24.146 [DEBUG] [z.i.p.c.ZWaveAlarmCommandClass:82 ]- NODE 21: Received Alarm Request
2016-12-01 19:04:24.146 [DEBUG] [z.i.p.c.ZWaveAlarmCommandClass:94 ]- NODE 21: Alarm report - Value = 0
2016-12-01 19:04:24.147 [DEBUG] [z.i.p.c.ZWaveAlarmCommandClass:112 ]- NODE 21: Alarm Type = Flood (5)
2016-12-01 19:04:24.148 [DEBUG] [.z.internal.ZWaveActiveBinding:450 ]- NODE 21: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 0
2016-12-01 19:05:06.920 [DEBUG] [ApplicationCommandMessageClass:38 ]- NODE 21: Application Command Request (ALIVE:DONE)
I would appreciate any help on what I’m doing wrong because nothing shows up in my events.log.