sonoff Plus V2 “ZBDongle-E” (based on EFR32MG21) ember device is now setup. Now I want to setup my devices thru the zigbee2mqtt user interface http://localhost:8088/#/ I have aqara devices: movement sensor, door sensors, temperature and humidity sensors. I also have a xiaomi temperature and hum…

[image] francoislavoie: For this I get into the zigbee2mqqt user interface. Using the option Permit to join all, I click on the little sun at its right. The interface changes from light blue to black. Don’t click on the sun. Click on “Permit to join” as in the snapshot below: [grafik] Aft…

[image] francoislavoie: Any howto to link these devices to thon the subject would be great. Follow “Frontend” Allowing devices to join | Zigbee2MQTT Follow “Pairing”: Allowing devices to join | Zigbee2MQTT Zigbee to MQTT bridge, get rid of your proprietary Zigbee bridges …

I have spent a few hours trying to understand the zigbee2mqtt ui using a few devices among which: aqara temperature sensor https://www.zigbee2mqtt.io/devices/WSDCGQ12LM.html aqara motion sensor p1 https://www.zigbee2mqtt.io/devices/RTCGQ14LM.html I though I saw something in the error log of zig…

This is the one I used: ["Secret" Zigbee2MQTT Dashboard]

So I realized that none of my attempt of pairing worked. I had to reset the zigbee2mqqt docker container. Then I tried to pair the aqara temperature and motion sensor. For this I get into the zigbee2mqqt user interface. Using the option Permit to join all, I click on the little sun at its right.…

Great! So simple that I could just miss it. Merci grandement! I have been able to pair: aqara motion sensors (2) aqara temperature and humidity sensors (2) aqara door sensor (2) aqara smoke alarm The xiaomi temperature and humidity sensor seems more complicated: https://www.zigbee2mqtt.io/…

Now I want to tie the motion and door sensor to a wifi alarm siren which is tuya. How do I do that?

[image] francoislavoie: Merci grandement! De rien ! :slightly_smiling_face: [image] francoislavoie: xiaomi temperature and humidity sensor Sorry, I don’t have thistemperature-sensor. I’m using “Sonoff SNZB-02D”, but as I understand you have to flash the sensor before using. Maybe thi…

The easiest way is to do it by a rule, if there are no direct chaining is possible. Here is a textual DSL-rule, which I’m using. rule "Alarmsirene" when Member of gWatAlTrig changed from OFF to ON then var vTriggerString = triggeringItem.name + " - " + triggeringItem.label sendComma…

Thanks for these procedures. I am away from home now, I will try these on Sunday or Monday.

openHAB Community

Howto setup aqara devices with the zigbee2mqtt user interface (for sonoff Plus V2 “ZBDongle-E)

sihui (SiHui) May 18, 2025, 7:57am 2

Follow “Frontend”
Allowing devices to join | Zigbee2MQTT
Follow “Pairing”:

Replacing an Aqara M2 hub with a Sonoff Zigbee 3.0 USB Dongle_Plus to detect zigbee sensors