# Https binding get value

**URL:** <https://community.openhab.org/t/https-binding-get-value/140774>\
**Category:** Bindings\
**Tags:** httpbinding\
**Created:** [November 8, 2022, 1:25pm UTC](https://community.openhab.org/t/https-binding-get-value/140774 "2022-11-08T13:25:27Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![rossko57](https://community.openhab.org/user_avatar/community.openhab.org/rossko57/32/70263_2.png) [@rossko57](https://community.openhab.org/u/rossko57)\
**Post date:** [November 8, 2022, 1:28pm UTC](https://community.openhab.org/t/https-binding-get-value/140774/2 "2022-11-08T13:28:57Z")

</div>

I think you can use the technique described here, using REGEX

> [@MQTT 2.5 M1+ How to implement the equivalent to MQTT1 REGEX filters](https://community.openhab.org/t/mqtt-2-5-m1-how-to-implement-the-equivalent-to-mqtt1-regex-filters/68350):
>
> Problem In the MQTT1 binding there was a feature that let us filter messages published to a given topic and only pass those that match a given REGEX to the transformation and/or on to the Item. This was useful to handle devices that publish messages to a single well known topic for all their devices. For example, the official firmware from the vendor of Shelly devices have a request/response protocol over MQTT to get meta data about the devices (IP address, MAC address, firmware version, whethe…

---

_[View the full topic](https://community.openhab.org/t/https-binding-get-value/140774)._