Iec6205621meter Problem

I installed the latest release of OH, v2.3. since then, i have the following error in the iec6205621meter Binding:

_

13:24:15.562 [ERROR] [inding.iec6205621meter.internal.Meter] - IOException while trying to read: STX (0x02) character is expected but not received as first byte of data message. (hex: 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)

_
The Power Counter is a Landis&Gyr type.
Any toughs?

Thank you

Walo

Hi Walo,
I have a very similar issue. Seems the binding is not handling our landis-meter properly. I had the old binding for OH1 in use quite some time ago (with the same setup) and it worked fine.
What you get in HEX code is just a part of the meter data (it’s truncated for whatever reason). Did it work for you before updating to OHv2.3?

Cheers,
Stefan