Include problem with POPP KFOB-C remote control

Hi,
I can’t include my KFOB-C 4 Button remote control. It’s probably the same than the KFOB from zwave.me.
After the inclusion I see a new but grey node. Also the chapter “Configuration” is missing.
I tried it several times, also with “Reinitialise Node” and “Heal Node”, but it remains grey. And it’s impossible to Exclude this node.
Now I have several new probably dead Nodes und the KFOB-C do not work.

Do some of you have an idea what’s going wrong. I found here some other posts about this control but no solution.

It would be great if someone can help me.

By the way, the inclusion of an similar 4 button wall switch was possible without any problems, and the procedure is the same.

Have you woken the device up a few times?

Not without seeing a log file…

Sorry, here is my log file
It’s the node 13
… and yes, I have woken it more then one times, but unfortunately without success.

2016-03-25 17:18:48.602 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:83]- NODE 13: Adding controller.
2016-03-25 17:18:48.603 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveInclusionEvent
2016-03-25 17:18:48.603 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-25 17:18:48.604 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 81 FF 
2016-03-25 17:18:48.606 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 04 0D 19 01 01 06 5E 8F 73 98 86 72 70 85 2D 8E 80 84 5A 59 5B EF 20 5B 26 27 2B 60 
2016-03-25 17:18:48.607 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-25 17:18:48.607 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]-          transaction complete!
2016-03-25 17:18:48.608 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-25 17:18:48.608 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-25 17:18:49.597 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 07 00 4A FF 05 0D 00 45 
2016-03-25 17:18:49.615 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-25 17:18:49.615 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-25 17:18:49.617 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 07 00 4A FF 05 0D 00 45 
2016-03-25 17:18:49.618 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 07 00 4A FF 05 0D 00 45 
2016-03-25 17:18:49.619 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 05 0D 00 
2016-03-25 17:18:49.620 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:87]- Add Node: Protocol done.
2016-03-25 17:18:49.621 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 81 FF 
2016-03-25 17:18:49.622 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 05 0D 00 
2016-03-25 17:18:49.623 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-25 17:18:49.623 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]-          transaction complete!
2016-03-25 17:18:49.624 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-25 17:18:49.625 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-25 17:19:07.953 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1356]- Ending inclusion mode.
2016-03-25 17:19:07.954 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1379]- Stopping inclusion timer.
2016-03-25 17:19:07.955 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:57]- Ending INCLUSION mode.
2016-03-25 17:19:07.956 DEBUG o.o.b.z.i.p.SerialMessage[:109]- NODE 255: Creating empty message of class = AddNodeToNetwork (0x4A), type = Request (0x00)
2016-03-25 17:19:07.957 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-25 17:19:07.958 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 4A 05 B4 
2016-03-25 17:19:07.959 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 4A 05 B4 
2016-03-25 17:19:07.960 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 0
2016-03-25 17:19:08.047 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 07 00 4A FF 06 0D 00 46 
2016-03-25 17:19:08.065 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-25 17:19:08.065 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-25 17:19:08.067 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 07 00 4A FF 06 0D 00 46 
2016-03-25 17:19:08.068 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 07 00 4A FF 06 0D 00 46 
2016-03-25 17:19:08.069 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 06 0D 00 
2016-03-25 17:19:08.070 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:90]- Add Node: Done.
2016-03-25 17:19:08.070 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveInclusionEvent
2016-03-25 17:19:08.071 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-25 17:19:08.071 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1379]- Stopping inclusion timer.
2016-03-25 17:19:08.072 ERROR o.o.b.z.i.c.ZWaveConfiguration[:1387]- Neither inclusion nor exclusion was active!
2016-03-25 17:19:08.072 DEBUG o.o.b.z.i.p.ZWaveController[:646]- NODE 13: Including node.
2016-03-25 17:19:08.074 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 05 
2016-03-25 17:19:08.074 DEBUG o.o.b.z.i.p.ZWaveController[:493]- NODE 13: Init node thread start
2016-03-25 17:19:08.075 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 06 0D 00 
2016-03-25 17:19:08.076 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-25 17:19:08.077 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]-          transaction complete!
2016-03-25 17:19:08.078 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-25 17:19:08.078 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-25 17:19:08.079 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1327]- NODE 255: Response processed after 119ms/4248ms.
2016-03-25 17:19:08.110 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 13: Serializing from file /var/lib/openhab/zwave/node13.xml
2016-03-25 17:19:08.111 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:141]- NODE 13: Error serializing from file: file does not exist.
2016-03-25 17:19:08.113 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:269]- NODE 13: Node advancer - EMPTYNODE: queue length(0), free to send(true)
2016-03-25 17:19:08.114 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:335]- NODE 13: Node advancer: loop - EMPTYNODE try 1: stageAdvanced(false)
2016-03-25 17:19:08.115 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:340]- NODE 13: Node advancer: Initialisation starting
2016-03-25 17:19:08.116 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:868]- NODE 13: Node advancer - advancing to PROTOINFO
2016-03-25 17:19:08.116 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:335]- NODE 13: Node advancer: loop - PROTOINFO try 0: stageAdvanced(true)
2016-03-25 17:19:08.117 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:349]- NODE 13: Node advancer: PROTOINFO - send IdentifyNode
2016-03-25 17:19:08.118 DEBUG o.o.b.z.i.p.SerialMessage[:109]- NODE 255: Creating empty message of class = IdentifyNode (0x41), type = Request (0x00)
2016-03-25 17:19:08.118 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-25 17:19:08.118 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-25 17:19:08.119 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:242]- NODE 13: Node advancer - queued packet. Queue length is 1
2016-03-25 17:19:08.119 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 0D B7 
2016-03-25 17:19:08.120 DEBUG o.o.b.z.i.p.ZWaveController[:585]- NODE 13: Init node thread finished
2016-03-25 17:19:08.120 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 41 0D B7 
2016-03-25 17:19:08.131 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:08.165 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-25 17:19:08.165 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-25 17:19:08.167 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:08.167 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:08.168 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06 
2016-03-25 17:19:08.169 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:52]- NODE 13: ProtocolInfo
2016-03-25 17:19:08.169 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:68]- NODE 13: Listening = false
2016-03-25 17:19:08.169 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:69]- NODE 13: Routing = false
2016-03-25 17:19:08.170 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:70]- NODE 13: Beaming = true
2016-03-25 17:19:08.170 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:71]- NODE 13: Version = 4
2016-03-25 17:19:08.171 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 13: FLIRS = false
2016-03-25 17:19:08.171 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 13: Security = false
2016-03-25 17:19:08.171 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 13: Max Baud = 40000
2016-03-25 17:19:08.172 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:89]- NODE 13: Basic = Controller
2016-03-25 17:19:08.172 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:96]- NODE 13: Generic = Remote Controller
2016-03-25 17:19:08.173 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:100]- NODE 13: Specific device class 0x06 not found
2016-03-25 17:19:13.146 ERROR o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1309]- NODE 255: Timeout while sending message. Requeueing - 2 attempts left!
2016-03-25 17:19:13.147 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-25 17:19:13.147 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-25 17:19:13.148 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 0D B7 
2016-03-25 17:19:13.149 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 41 0D B7 
2016-03-25 17:19:13.153 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:13.185 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-25 17:19:13.185 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-25 17:19:13.187 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:13.188 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 09 01 41 13 96 01 01 01 06 34 
2016-03-25 17:19:13.189 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06 
2016-03-25 17:19:13.190 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:52]- NODE 13: ProtocolInfo
2016-03-25 17:19:13.190 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:68]- NODE 13: Listening = false
2016-03-25 17:19:13.191 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:69]- NODE 13: Routing = false
2016-03-25 17:19:13.192 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:70]- NODE 13: Beaming = true
2016-03-25 17:19:13.192 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:71]- NODE 13: Version = 4
2016-03-25 17:19:13.193 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 13: FLIRS = false
2016-03-25 17:19:13.193 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 13: Security = false
2016-03-25 17:19:13.194 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 13: Max Baud = 40000
2016-03-25 17:19:13.194 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:89]- NODE 13: Basic = Controller
2016-03-25 17:19:13.195 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:96]- NODE 13: Generic = Remote Controller
2016-03-25 17:19:13.196 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:100]- NODE 13: Specific device class 0x06 not found
2016-03-25 17:19:18.165 ERROR o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1309]- NODE 255: Timeout while sending message. Requeueing - 1 attempts left!
2016-03-25 17:19:18.166 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-25 17:19:18.167 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending.

No ideas? I am not an expert for this log file but I can’t see an error. Why do this remote control not have a complete inclusion in habmin? I can try it again and again but always with the same result.

The node is included, but it’s not been woken up - at least not in this log. One issue that is likely to be a problem is the device class error - I need to look at this some more but haven’t had a chance yet.

Hi chris,

thanks for the answer. Hope you finf an answer soon. If you need any further logs please contact me.
In the meantime I have excluded and included this device again but with the Erpert UI of zway. It’s fully included and I can programm it, but with zway only. In habmin I have only the grey node without the configuration and association chapter.

I’ve added the new device class this morning, so please try again tomorrow…

Thank you,
but how to do it again. First exclude and then a new include procedure? Or different?

You just need to wake up the device and see if it gets any further with the initialisation…

I tried it with the wake up, but no success.
Then I excluded it and included it again. Now I have a new node, but the problem still remains. Its still grey and has neither a configuration nor an association chapter.

Including again won’t make any difference. The issue is with the initialisation… Can you provide a new log from the new binding?

Here the log. It’s the node 16:

2016-03-28 21:32:15.399 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:83]- NODE 16: Adding controller.
2016-03-28 21:32:15.399 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveInclusionEvent
2016-03-28 21:32:15.400 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-28 21:32:15.400 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 81 FF
2016-03-28 21:32:15.401 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 04 10 19 01 01 06 5E 8F 73 98 86 72 70 85 2D 8E 80 84 5A 59 5B EF 20 5B 26 27 2B 60
2016-03-28 21:32:15.402 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-28 21:32:15.403 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]- transaction complete!
2016-03-28 21:32:15.403 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-28 21:32:15.404 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-28 21:32:16.358 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 07 00 4A FF 05 10 00 58
2016-03-28 21:32:16.373 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-28 21:32:16.374 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-28 21:32:16.375 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 07 00 4A FF 05 10 00 58
2016-03-28 21:32:16.375 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 07 00 4A FF 05 10 00 58
2016-03-28 21:32:16.376 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 05 10 00
2016-03-28 21:32:16.377 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:87]- Add Node: Protocol done.
2016-03-28 21:32:16.377 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 81 FF
2016-03-28 21:32:16.378 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 05 10 00
2016-03-28 21:32:16.378 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-28 21:32:16.379 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]- transaction complete!
2016-03-28 21:32:16.379 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-28 21:32:16.380 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-28 21:32:36.753 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1356]- Ending inclusion mode.
2016-03-28 21:32:36.754 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1379]- Stopping inclusion timer.
2016-03-28 21:32:36.755 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:57]- Ending INCLUSION mode.
2016-03-28 21:32:36.756 DEBUG o.o.b.z.i.p.SerialMessage[:109]- NODE 255: Creating empty message of class = AddNodeToNetwork (0x4A), type = Request (0x00)
2016-03-28 21:32:36.756 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-28 21:32:36.756 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-28 21:32:36.758 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 4A 05 B4
2016-03-28 21:32:36.759 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 4A 05 B4
2016-03-28 21:32:37.054 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 07 00 4A FF 06 10 00 5B
2016-03-28 21:32:37.073 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-28 21:32:37.074 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-28 21:32:37.075 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 07 00 4A FF 06 10 00 5B
2016-03-28 21:32:37.076 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 07 00 4A FF 06 10 00 5B
2016-03-28 21:32:37.077 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 06 10 00
2016-03-28 21:32:37.078 DEBUG o.o.b.z.i.p.s.AddNodeMessageClass[:90]- Add Node: Done.
2016-03-28 21:32:37.079 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveInclusionEvent
2016-03-28 21:32:37.079 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-28 21:32:37.080 DEBUG o.o.b.z.i.c.ZWaveConfiguration[:1379]- Stopping inclusion timer.
2016-03-28 21:32:37.081 ERROR o.o.b.z.i.c.ZWaveConfiguration[:1387]- Neither inclusion nor exclusion was active!
2016-03-28 21:32:37.081 DEBUG o.o.b.z.i.p.ZWaveController[:646]- NODE 16: Including node.
2016-03-28 21:32:37.083 DEBUG o.o.b.z.i.p.ZWaveController[:493]- NODE 16: Init node thread start
2016-03-28 21:32:37.083 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:63]- Sent message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = 05
2016-03-28 21:32:37.085 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:64]- Recv message Message: class = AddNodeToNetwork (0x4A), type = Request (0x00), payload = FF 06 10 00
2016-03-28 21:32:37.086 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:65]- Checking transaction complete: class=AddNodeToNetwork, expected=AddNodeToNetwork, cancelled=false
2016-03-28 21:32:37.087 DEBUG o.o.b.z.i.p.s.ZWaveCommandProcessor[:68]- transaction complete!
2016-03-28 21:32:37.088 DEBUG o.o.b.z.i.p.ZWaveController[:635]- Notifying event listeners: ZWaveTransactionCompletedEvent
2016-03-28 21:32:37.089 DEBUG o.o.b.z.i.ZWaveActiveBinding[:433]- ZwaveIncomingEvent
2016-03-28 21:32:37.090 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1327]- NODE 255: Response processed after 331ms/479ms.
2016-03-28 21:32:37.118 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 16: Serializing from file /var/lib/openhab/zwave/node16.xml
2016-03-28 21:32:37.119 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:141]- NODE 16: Error serializing from file: file does not exist.
2016-03-28 21:32:37.121 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:269]- NODE 16: Node advancer - EMPTYNODE: queue length(0), free to send(true)
2016-03-28 21:32:37.122 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:335]- NODE 16: Node advancer: loop - EMPTYNODE try 1: stageAdvanced(false)
2016-03-28 21:32:37.122 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:340]- NODE 16: Node advancer: Initialisation starting
2016-03-28 21:32:37.123 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:868]- NODE 16: Node advancer - advancing to PROTOINFO
2016-03-28 21:32:37.124 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:335]- NODE 16: Node advancer: loop - PROTOINFO try 0: stageAdvanced(true)
2016-03-28 21:32:37.125 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:349]- NODE 16: Node advancer: PROTOINFO - send IdentifyNode
2016-03-28 21:32:37.126 DEBUG o.o.b.z.i.p.SerialMessage[:109]- NODE 255: Creating empty message of class = IdentifyNode (0x41), type = Request (0x00)
2016-03-28 21:32:37.127 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-28 21:32:37.127 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-28 21:32:37.127 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:242]- NODE 16: Node advancer - queued packet. Queue length is 1
2016-03-28 21:32:37.128 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 10 AA
2016-03-28 21:32:37.129 DEBUG o.o.b.z.i.p.ZWaveController[:585]- NODE 16: Init node thread finished
2016-03-28 21:32:37.129 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 41 10 AA
2016-03-28 21:32:37.137 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:37.173 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-28 21:32:37.174 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-28 21:32:37.175 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:37.176 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:37.176 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06
2016-03-28 21:32:37.177 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:52]- NODE 16: ProtocolInfo
2016-03-28 21:32:37.177 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:68]- NODE 16: Listening = false
2016-03-28 21:32:37.178 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:69]- NODE 16: Routing = false
2016-03-28 21:32:37.178 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:70]- NODE 16: Beaming = true
2016-03-28 21:32:37.178 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:71]- NODE 16: Version = 4
2016-03-28 21:32:37.179 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 16: FLIRS = false
2016-03-28 21:32:37.179 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 16: Security = false
2016-03-28 21:32:37.179 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 16: Max Baud = 40000
2016-03-28 21:32:37.180 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:89]- NODE 16: Basic = Controller
2016-03-28 21:32:37.180 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:96]- NODE 16: Generic = Remote Controller
2016-03-28 21:32:37.181 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:100]- NODE 16: Specific device class 0x06 not found
2016-03-28 21:32:42.153 ERROR o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1309]- NODE 255: Timeout while sending message. Requeueing - 2 attempts left!
2016-03-28 21:32:42.154 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-28 21:32:42.155 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-28 21:32:42.156 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 10 AA

and I tried it with the wake up:

2016-03-28 21:32:42.196 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06
2016-03-28 21:32:42.197 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:52]- NODE 16: ProtocolInfo
2016-03-28 21:32:42.197 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:68]- NODE 16: Listening = false
2016-03-28 21:32:42.197 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:69]- NODE 16: Routing = false
2016-03-28 21:32:42.198 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:70]- NODE 16: Beaming = true
2016-03-28 21:32:42.198 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:71]- NODE 16: Version = 4
2016-03-28 21:32:42.199 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 16: FLIRS = false
2016-03-28 21:32:42.199 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 16: Security = false
2016-03-28 21:32:42.199 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 16: Max Baud = 40000
2016-03-28 21:32:42.200 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:89]- NODE 16: Basic = Controller
2016-03-28 21:32:42.200 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:96]- NODE 16: Generic = Remote Controller
2016-03-28 21:32:42.201 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:100]- NODE 16: Specific device class 0x06 not found
2016-03-28 21:32:47.173 ERROR o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1309]- NODE 255: Timeout while sending message. Requeueing - 1 attempts left!
2016-03-28 21:32:47.175 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-28 21:32:47.175 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-28 21:32:47.176 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 10 AA
2016-03-28 21:32:47.177 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1268]- NODE 255: Sending REQUEST Message = 01 04 00 41 10 AA
2016-03-28 21:32:47.181 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1481]- Receive Message = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:47.213 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveReceiveThread[:1405]- Receive queue ADD: Length=1
2016-03-28 21:32:47.213 DEBUG o.o.b.z.i.p.ZWaveController[:1163]- Receive queue TAKE: Length=0
2016-03-28 21:32:47.215 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:47.216 DEBUG o.o.b.z.i.p.ZWaveController[:1164]- Process Message = 01 09 01 41 13 96 01 01 01 06 34
2016-03-28 21:32:47.217 DEBUG o.o.b.z.i.p.ZWaveController[:192]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06
2016-03-28 21:32:47.218 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:52]- NODE 16: ProtocolInfo
2016-03-28 21:32:47.219 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:68]- NODE 16: Listening = false
2016-03-28 21:32:47.219 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:69]- NODE 16: Routing = false
2016-03-28 21:32:47.220 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:70]- NODE 16: Beaming = true
2016-03-28 21:32:47.220 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:71]- NODE 16: Version = 4
2016-03-28 21:32:47.221 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 16: FLIRS = false
2016-03-28 21:32:47.221 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 16: Security = false
2016-03-28 21:32:47.222 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 16: Max Baud = 40000
2016-03-28 21:32:47.223 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:89]- NODE 16: Basic = Controller
2016-03-28 21:32:47.223 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:96]- NODE 16: Generic = Remote Controller
2016-03-28 21:32:47.224 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:100]- NODE 16: Specific device class 0x06 not found
2016-03-28 21:32:52.194 ERROR o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1309]- NODE 255: Timeout while sending message. Requeueing - 0 attempts left!
2016-03-28 21:32:52.194 DEBUG o.o.b.z.i.p.ZWaveController[:620]- Enqueueing message. Queue length = 1
2016-03-28 21:32:52.195 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1211]- Took message from queue for sending. Queue length = 0
2016-03-28 21:32:52.196 DEBUG o.o.b.z.i.p.SerialMessage[:233]- Assembled message buffer = 01 04 00 41 10 AA

Strange - I’m still seeing the same error. Maybe I screwed up, but it looks like it’s ok. Can you confirm the version of the binding you’re running (it’s printed in the log when the binding starts) - is this the latest from Cloudbees?

My version is:

2016-03-29 12:53:16.470 DEBUG o.o.b.z.i.ZWaveActivator[:36]- Z-Wave binding started. Version 1.8.1

Is there a newer version abailable?

Yes - you need to use a new version. If I make changes to the binding, it won’t update the version that you have on your machine unless you update the file :wink:

You should use the nightly build from cloudbees.

Ok, sorry, but I am still learning.
Now I used the version 1.9.0.201603290113 and it runs.
Many thanks for your support.

Ups, I was to fast.
The chapter Configuration and Assoziation Groups etc. are there, but without any content.
I woke up the device several times. What can I do now? Do I have to change more then the .jar file?
The “/var/lib/openhab/zwave/node16.xml” do not exist!

Here the log.

2016-03-29 13:04:56.445 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 1: Node found
2016-03-29 13:04:56.447 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 2: Node found
2016-03-29 13:04:56.448 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 4: Node found
2016-03-29 13:04:56.449 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 5: Node found
2016-03-29 13:04:56.450 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 6: Node found
2016-03-29 13:04:56.451 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 8: Node found
2016-03-29 13:04:56.452 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 10: Node found
2016-03-29 13:04:56.453 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 15: Node found
2016-03-29 13:04:56.454 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 16: Node found
2016-03-29 13:04:56.454 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 17: Node found
2016-03-29 13:04:56.455 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 18: Node found
2016-03-29 13:04:56.456 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 21: Node found
2016-03-29 13:04:56.457 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 22: Node found
2016-03-29 13:04:56.458 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 24: Node found
2016-03-29 13:04:56.460 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:68]- ZWave Controller using Controller API
2016-03-29 13:04:56.461 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:70]- ZWave Controller is Primary Controller
2016-03-29 13:04:56.462 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:72]- ------------Number of Nodes Found Registered to ZWave Controller------------
2016-03-29 13:04:56.463 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:73]- # Nodes = 14
.
2016-03-29 13:04:56.488 DEBUG o.o.b.z.i.p.ZWaveController[:506]- NODE 15: Init node thread start
2016-03-29 13:04:56.490 DEBUG o.o.b.z.i.p.ZWaveController[:506]- NODE 16: Init node thread start
2016-03-29 13:04:56.493 DEBUG o.o.b.z.i.p.ZWaveController[:506]- NODE 17: Init node thread start
.
2016-03-29 13:04:58.347 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 6: Serializing from file /var/lib/openhab/zwave/node6.xml
2016-03-29 13:04:58.346 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 16: Serializing from file /var/lib/openhab/zwave/node16.xml
2016-03-29 13:04:58.346 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 4: Serializing from file /var/lib/openhab/zwave/node4.xml
.

2016-03-29 13:04:58.475 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:267]- NODE 16: Node advancer - EMPTYNODE: queue length(0), free to send(true)
2016-03-29 13:04:58.477 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:332]- NODE 16: Node advancer: loop - EMPTYNODE try 1: stageAdvanced(false)
2016-03-29 13:04:58.484 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:337]- NODE 16: Node advancer: Initialisation starting
2016-03-29 13:04:58.486 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:890]- NODE 16: Node advancer - advancing to PROTOINFO
2016-03-29 13:04:58.496 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:332]- NODE 16: Node advancer: loop - PROTOINFO try 0: stageAdvanced(true)
2016-03-29 13:04:58.498 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:346]- NODE 16: Node advancer: PROTOINFO - send IdentifyNode
2016-03-29 13:04:58.502 DEBUG o.o.b.z.i.p.SerialMessage[:113]- NODE 255: Creating empty message of class = IdentifyNode (0x41), type = Request (0x00)
2016-03-29 13:04:58.504 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1241]- Took message from queue for sending. Queue length = 0
2016-03-29 13:04:58.506 DEBUG o.o.b.z.i.p.SerialMessage[:243]- Assembled message buffer = 01 04 00 41 10 AA
2016-03-29 13:04:58.507 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1301]- NODE 255: Sending REQUEST Message = 01 04 00 41 10 AA
2016-03-29 13:04:58.509 DEBUG o.o.b.z.i.p.ZWaveController[:632]- Enqueueing message. Queue length = 0

.

2016-03-29 13:04:58.574 DEBUG o.o.b.z.i.p.ZWaveController[:194]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06
2016-03-29 13:04:58.575 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:56]- NODE 16: ProtocolInfo
2016-03-29 13:04:58.581 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 16: Listening = false
2016-03-29 13:04:58.582 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 16: Routing = false
2016-03-29 13:04:58.583 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 16: Beaming = true
2016-03-29 13:04:58.584 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:75]- NODE 16: Version = 4
2016-03-29 13:04:58.584 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:76]- NODE 16: FLIRS = false
2016-03-29 13:04:58.585 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:77]- NODE 16: Security = false
2016-03-29 13:04:58.622 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:78]- NODE 16: Max Baud = 40000
2016-03-29 13:04:58.623 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:94]- NODE 16: Basic = Controller
2016-03-29 13:04:58.625 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:102]- NODE 16: Generic = Remote Controller
2016-03-29 13:04:58.627 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:106]- NODE 16: Specific device class 0x06 not found
2016-03-29 13:04:58.620 DEBUG o.o.b.z.i.p.ZWaveController[:539]- NODE 1: Restore from config: Ok.
2016-03-29 13:04:58.656 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:267]- NODE 1: Node advancer - EMPTYNODE: queue length(0), free to send(true)

Sorry - my mistake this time. I’ve put the new class in the wrong place :frowning:. I’ll update this later today and you can try again tomorrow…

Hey chris,

has you already updated it? I woke up my KFOB but with the same result. No configuration or assoziation content.
The file /var/lib/openhab/zwave/node16.xml exists.
Here the log:

2016-03-30 02:00:08.881 DEBUG o.o.b.z.i.ZWaveNetworkMonitor[:295]- NODE 16: Initialisation NOT yet complete. Skipping heal.

2016-03-30 20:22:49.811 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 16: Node found

2016-03-30 20:22:49.833 DEBUG o.o.b.z.i.p.ZWaveController[:506]- NODE 16: Init node thread start

2016-03-30 20:22:50.863 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:138]- NODE 16: Serializing from file /var/lib/openhab/zwave/node16.xml
2016-03-30 20:22:50.887 DEBUG o.o.b.z.i.p.i.ZWaveNodeSerializer[:141]- NODE 16: Error serializing from file: file does not exist.

2016-03-30 20:22:51.002 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:267]- NODE 16: Node advancer - EMPTYNODE: queue length(0), free to send(true)

2016-03-30 20:22:51.004 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:332]- NODE 16: Node advancer: loop - EMPTYNODE try 1: stageAdvanced(false)

2016-03-30 20:22:51.018 DEBUG o.o.b.z.i.p.ZWaveController$ZWaveSendThread[:1301]- NODE 255: Sending REQUEST Message = 01 04 00 41 11 AB
2016-03-30 20:22:51.015 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:337]- NODE 16: Node advancer: Initialisation starting
2016-03-30 20:22:51.028 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:890]- NODE 16: Node advancer - advancing to PROTOINFO
2016-03-30 20:22:51.028 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:332]- NODE 16: Node advancer: loop - PROTOINFO try 0: stageAdvanced(true)
2016-03-30 20:22:51.029 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:346]- NODE 16: Node advancer: PROTOINFO - send IdentifyNode
2016-03-30 20:22:51.034 DEBUG o.o.b.z.i.p.SerialMessage[:113]- NODE 255: Creating empty message of class = IdentifyNode (0x41), type = Request (0x00)
2016-03-30 20:22:51.035 DEBUG o.o.b.z.i.p.ZWaveController[:632]- Enqueueing message. Queue length = 1
2016-03-30 20:22:51.036 DEBUG o.o.b.z.i.p.i.ZWaveNodeStageAdvancer[:240]- NODE 16: Node advancer - queued packet. Queue length is 1
2016-03-30 20:22:51.037 DEBUG o.o.b.z.i.p.ZWaveController[:595]- NODE 16: Init node thread finished
2016-03-30 20:22:51.012 DEBUG o.o.b.z.i.p.SerialMessage[:113]- NODE 255: Creating empty message of class = IdentifyNode (0x41), type = Request (0x00)
2016-03-30 20:22:51.045 DEBUG o.o.b.z.i.p.ZWaveController[:632]- Enqueueing message. Queue length = 2

2016-03-30 20:22:51.285 DEBUG o.o.b.z.i.p.ZWaveController[:194]- Message: class = IdentifyNode (0x41), type = Response (0x01), payload = 13 96 01 01 01 06
2016-03-30 20:22:51.286 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:56]- NODE 16: ProtocolInfo
2016-03-30 20:22:51.287 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:72]- NODE 16: Listening = false
2016-03-30 20:22:51.288 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:73]- NODE 16: Routing = false
2016-03-30 20:22:51.289 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:74]- NODE 16: Beaming = true
2016-03-30 20:22:51.290 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:75]- NODE 16: Version = 4
2016-03-30 20:22:51.299 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:76]- NODE 16: FLIRS = false
2016-03-30 20:22:51.300 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:77]- NODE 16: Security = false
2016-03-30 20:22:51.310 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:78]- NODE 16: Max Baud = 40000
2016-03-30 20:22:51.311 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:94]- NODE 16: Basic = Controller
2016-03-30 20:22:51.311 DEBUG o.o.b.z.i.p.s.IdentifyNodeMessageClass[:102]- NODE 16: Generic = Remote Controller
2016-03-30 20:22:51.312 ERROR o.o.b.z.i.p.s.IdentifyNodeMessageClass[:106]- NODE 16: Specific device class 0x06 not found

2016-03-30 20:24:47.272 INFO o.o.b.z.i.p.s.SerialApiGetInitDataMessageClass[:60]- NODE 16: Node found

Yes - it should have been updated this morning. I’m not sure now why it wouldn’t pick up the new device class. Is there anything else in the log around this point? I expected to see the complete recieve packet being logged?