tramlaan
(tramlaan)
November 21, 2019, 11:06am
1
Release = Raspbian GNU/Linux 10 (buster)
Kernel = Linux 4.19.75-v7+
Platform = Raspberry Pi 2 Model B Rev 1.1
openHAB 2.4.0-1 (Release Build)
While using valuecolor on a Setpoint item nothing happens however labelcolor is working
Does it means valuecolor is not supported by a SetPoint item or is this for a new release?
Thanks
Robert
Unlike some places we prefer having details about what you atr trying to accomplish. you so not even state the TYPE if Item you are testing.
Before you ask…
Community forum is NOT a helpdesk
Let’s put this in the front: nobody here works for openHAB. The community members are helping with an Open Source Project, not a commercial software.
Additionally, the forum is NOT dealing with general Home Automation topics, the focus is on openHAB. In some cases, various products or technologies which are not directly linked to openHAB can be discussed but with the proper title , category or tag .
We are ALL volunteering our free time to help…
rossko57
(Rossko57)
November 21, 2019, 11:58am
3
Tried this; I think you’ve found a bug in BasicUI for OH2.4.
valuecolor=
for Setpoint widget works in ClassicUI but not BasicUI
This should be tested in later version.
tramlaan
(tramlaan)
November 21, 2019, 2:06pm
4
@rossko57
Yes you are right it is OK with the Classic UI, I hope this will be corrected with the next version.
@Bruce_Osborne
Please report the issue on GitHub where the developers look to resolve problems. Not all of them user this community forum.
rossko57
(Rossko57)
November 21, 2019, 3:37pm
6
It won’t be corrected unless reported.
It may already have been corrected, there have been UI updates.
Would an OH2.5M4/5 user be do kind as to test for us? A Setpoint with valuecolor=[“red”] will do.
tramlaan
(tramlaan)
November 21, 2019, 4:29pm
7
@rossko57
Yes but …
After years of using OH1, I ’ just spend some long weeks…s to configure a new environment with OH2.4, going from surprises to surprises while simply trying adapt my new MQTT devices using OH2.
So let me go through my journey across 2.4 before starting a new kind of experience with 2.5.
NB: As friendly requested, did open an issue see [https://github.com/openhab/openhab-core/issues/1234 ]
ljsquare
(Laurens Jan Merkx)
November 21, 2019, 4:51pm
8
I can confirm that both valuecolor
and labelcolor
wont work on a Setpoint in 2.5M5 in Basic UI in a browser, but… on the IOS app it works.
1 Like