# Klipper / Moonraker binding for 3D Printer

**URL:** <https://community.openhab.org/t/klipper-moonraker-binding-for-3d-printer/118958>\
**Category:** Bindings\
**Created:** [March 14, 2021, 1:49pm UTC](https://community.openhab.org/t/klipper-moonraker-binding-for-3d-printer/118958 "2021-03-14T13:49:41Z")\
**Posts on this page:** 1\
**Showing post:** 44

<div class="post-metadata">

**Author:** ![Vradatta](https://community.openhab.org/user_avatar/community.openhab.org/vradatta/32/56686_2.png) [@Vradatta](https://community.openhab.org/u/Vradatta)\
**Post date:** [January 2, 2024, 2:05pm UTC](https://community.openhab.org/t/klipper-moonraker-binding-for-3d-printer/118958/44 "2024-01-02T14:05:21Z")

</div>

I had finally the time, to publish the moonraker/klipper binding to the openhab martketplace.

I will only update the binding there if something will change or have to be fixed.

> [@Moonraker/Klipper Binding](https://community.openhab.org/t/moonraker-klipper-binding/152584):
>
> [klipper-logo] This is a binding to connect a 3D-Printer, which is running Klipper and Moonraker to Openhab. With the Thing created by the Binding, you can control a 3D-Printer (send G-Codes), and receive data from the 3D-Printer (State, Extruder Temperature, Progress, etc..) For more details about Klipper, please see the official [Klippler site](https://www.klipper3d.org/) For more details about Moonraker, please see the official [Moonraker site](https://moonraker.readthedocs.io/en/latest/)Changelog Version 0.1 initial release ported to Openhab 4.1.X (should also…

---

_[View the full topic](https://community.openhab.org/t/klipper-moonraker-binding-for-3d-printer/118958)._