# Lutron Binding with Series 8 Processor

**URL:** <https://community.openhab.org/t/lutron-binding-with-series-8-processor/170839>\
**Category:** Bindings\
**Created:** [October 31, 2026, 3:47pm UTC](https://community.openhab.org/t/lutron-binding-with-series-8-processor/170839 "2026-10-31T15:47:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![awald](https://community.openhab.org/letter_avatar_proxy/v4/letter/a/dbc845/32.png) [@awald](https://community.openhab.org/u/awald)\
**Post date:** [October 31, 2026, 3:47pm UTC](https://community.openhab.org/t/lutron-binding-with-series-8-processor/170839/1 "2026-10-31T15:47:27Z")

</div>

I have a Lutron Series 8 processor with serial ports and an Ethernet port. When I telnet to the Ethernet port it presents the same text interface as a direct connection on a serial port.

Is there a way to configure the Lutron binding to connect to this Ethernet interface? Or do I need to set up a serial adapter?

The Series 8 processor is Lutron’s predecessor to the QS processor. I’m trying to port an AMX-based automation to OH so I can finally retire the AMX system.