Hello,
I Have a motionsensor which is not updating. I have this sensor allready some time and wasn’t recognised in the older openhab version. After a few updates back it was recognised by the zwave binding, but I could not get it to work. I did some troubleshooting today and I can see in the log that zwavebinding is trying to update something, but it is not seen in the paperUI control section. I allready tried to link several different items but can’t get it to work. At last I made a rule to log something, but this rule is also not triggered.
I also tried to delete the thing and let it discover again, log part also included.
The rule:
rule test123
when Channel “zwave:device:512:node21:alarm_motion” triggered
then
logInfo(“Zwave”,“Test bewegings sensor”)
end
The log file (relevant part’s i think):
2020-09-22 20:08:37.573 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Handler disposed. Unregistering listener.
2020-09-22 20:08:37.594 [DEBUG] [l.initialization.ZWaveNodeSerializer] - NODE 21: Serializing to file /var/lib/openhab2/zwave/network_d2ec57a9__node_21.xml
2020-09-22 20:09:13.102 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 21: Device discovery completed
2020-09-22 20:09:13.103 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 21: Device discovery resolved to thingType zwave:hank_hkzwms02_00_000
2020-09-22 20:09:31.538 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Controller status changed to ONLINE.
2020-09-22 20:09:31.538 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Controller is ONLINE. Starting device initialisation.
2020-09-22 20:09:31.541 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties.
2020-09-22 20:09:31.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties. MAN=520
2020-09-22 20:09:31.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating node properties. MAN=520. SET. Was 520
2020-09-22 20:09:31.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Properties synchronised
2020-09-22 20:09:31.546 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Update ASSOCIATION group_ZWaveAssociationGroup [index=1, name=Lifeline, profile1=0, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-09-22 20:09:31.546 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Update ASSOCIATION group_ZWaveAssociationGroup [index=2, name=On/Off control, profile1=32, profile2=1, associations=[node_1]]: Adding Controller (node_1)
2020-09-22 20:09:31.547 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Configuration synchronised
2020-09-22 20:09:31.550 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising Thing Node…
2020-09-22 20:09:31.550 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:512:node21:alarm_motion for OnOffType
2020-09-22 20:09:31.550 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:512:node21:alarm_motion for OnOffType
2020-09-22 20:09:31.551 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:512:node21:alarm_motion for OnOffType
2020-09-22 20:09:31.551 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising cmd channel zwave:device:512:node21:battery-level for PercentType
2020-09-22 20:09:31.551 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Initialising state channel zwave:device:512:node21:battery-level for PercentType
2020-09-22 20:09:31.552 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Polling initialised at 1800 seconds - start in 541800 milliseconds.
2020-09-22 20:09:31.552 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Device initialisation complete.
when motion detected (on or of, in this case off)
2020-09-22 20:44:55.145 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: Application Command Request (ALIVE:DONE)
2020-09-22 20:44:55.145 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: resetResendCount initComplete=true isDead=false
2020-09-22 20:44:55.146 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: Incoming command class COMMAND_CLASS_ALARM, endpoint 0
2020-09-22 20:44:55.146 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 21: SECURITY NOT required on COMMAND_CLASS_ALARM
2020-09-22 20:44:55.146 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 21: Received COMMAND_CLASS_ALARM V5 NOTIFICATION_REPORT
2020-09-22 20:44:55.146 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 21: NOTIFICATION report - 0 = 0, event=0, status=255, plen=1
2020-09-22 20:44:55.147 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 21: Alarm Type = BURGLAR (0)
2020-09-22 20:44:55.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2020-09-22 20:44:55.147 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255
2020-09-22 20:44:55.147 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 21: Alarm converter processing NOTIFICATION
2020-09-22 20:44:55.148 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 21: Alarm converter NOTIFICATION event is 0, type OnOffType
2020-09-22 20:44:55.148 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 21: Updating channel state zwave:device:512:node21:alarm_motion to OFF [OnOffType]
2020-09-22 20:44:55.148 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: Commands processed 1.
2020-09-22 20:44:55.149 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 21: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@17c9785b.
I’m running openhab version:
openHAB 2.5.9 Release Build
Thanks in advance,
Peter.