# Multi zone heating solution

**URL:** <https://community.openhab.org/t/multi-zone-heating-solution/85533>\
**Category:** Home Automation\
**Created:** [November 15, 2019, 9:45am UTC](https://community.openhab.org/t/multi-zone-heating-solution/85533 "2019-11-15T09:45:29Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Confused](https://community.openhab.org/user_avatar/community.openhab.org/confused/32/72636_2.png) [@Confused](https://community.openhab.org/u/Confused)\
**Post date:** [November 15, 2019, 3:00pm UTC](https://community.openhab.org/t/multi-zone-heating-solution/85533/5 "2019-11-15T15:00:24Z")

</div>

> [@My Central Heating Solution using Thermal Actuators](https://community.openhab.org/t/my-central-heating-solution-using-thermal-actuators/41320/):
>
> Hi all, I’m sharing with you here my heating setup in the hopes that it can help someone (and to just show it off, too, I guess. My house is quite typical of UK houses, where I have a boiler, and one or more radiators in each room. The boiler is on/off only, and has a single thermostat, usually located in the worst possible room in the house. You then end up with a single thermostat controlling the temperature of the whole house. I had basic thermostatic valves on each radiator, but the overal…

Here’s my current solution. I’ve got 16 individual zones defined, each of which have their own target temperatures and schedules.

I still need to stop the overshooting of the target in some rooms, but it’s keeping my house a nice temperature, and every room is the right temperatures when it needs to be.

---

_[View the full topic](https://community.openhab.org/t/multi-zone-heating-solution/85533)._