# Nas-ds01z neo coolcam door sensor **URL:** \ **Category:** Bindings\ **Tags:** zwave, openhab3\ **Created:** [September 17, 2021, 12:32pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611 "2021-09-17T12:32:03Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 17, 2021, 12:32pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/1 "2021-09-17T12:32:03Z")
Hi! I am trying to add a Neo coolcam door sensor NAS-DS01 which is in the database [OpenSmartHouse Z-Wave Device Database](https://www.opensmarthouse.org/zwavedatabase/400) but named NAS-DS01Z. my is without Z in the end. I have woke the device but no channels pop up. I guess its missing support Openhab named the device like this Z-Wave Node 032 (0258:0200:1022:2.12) Also this is copy pasted from thing properties accordian - zwave\_class\_basic BASIC\_TYPE\_ROUTING\_SLAVE - zwave\_class\_generic GENERIC\_TYPE\_SENSOR\_NOTIFICATION - zwave\_frequent false - zwave\_neighbours - zwave\_version 2.12 - zwave\_listening false - zwave\_deviceid 4130 - zwave\_nodeid 32 - zwave\_routing true - zwave\_beaming true - zwave\_secure false - zwave\_class\_specific SPECIFIC\_TYPE\_NOTIFICATION\_SENSOR - zwave\_manufacturer 600 - zwave\_devicetype 512 This is from my logs ![image](https://community.openhab.org/images/transparent.png) Do I need to create a new device or am I doing something wrong? ---
**Author:** ![apella12](https://community.openhab.org/user_avatar/community.openhab.org/apella12/32/117154_2.png) [@apella12](https://community.openhab.org/u/apella12)\ **Post date:** [September 17, 2021, 3:18pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/2 "2021-09-17T15:18:43Z")
I’m pretty new to the device database, but I would give a qualified yes. Something will need to be modified. The > 0258:0200:1022:2.12 Is showing the manufacturer (0258) and device ID (0200:1022) On the page you linked that device ID is not among the possibilities. It _ **might** _ be a simple matter to just add the device ID to the list on the page you referenced, if all the other elements look the same. The Debug extract is only part of the initialization, so its hard to say anything else (if something else went wrong earlier (or happens later), except that it is past the stage (IMO) that the device would normally be identified. Bob ---
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 18, 2021, 8:17pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/3 "2021-09-18T20:17:36Z")
Can i somehow configure my openhab instance so that my device is identified as the one I linked to? So I can test it. ---
**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\ **Post date:** [September 18, 2021, 8:45pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/4 "2021-09-18T20:45:29Z")
I’ve updated the database to include this ID. ---
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 19, 2021, 8:30am UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/5 "2021-09-19T08:30:17Z")
Thanks! What does that mean? Do I need to update my local database in Openhab somehow? I found out that it is possible to update the zwave binding in the karaf console. bundle:update ID update URL I saw there was an url for the zwave binding build (pull request) where the updated ID was added. > **[PR-org.openhab.binding.zwave #2340 - Jenkins](https://ci.openhab.org/view/Pull%20Request%20Builds/job/PR-org.openhab.binding.zwave/lastSuccessfulBuild/)** But that pipeline does not contain any artifacts. If it would exist I could update to that artifact. With bundle:update command. ---
**Author:** ![apella12](https://community.openhab.org/user_avatar/community.openhab.org/apella12/32/117154_2.png) [@apella12](https://community.openhab.org/u/apella12)\ **Post date:** [September 19, 2021, 6:51pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/6 "2021-09-19T18:51:19Z")
At this point, it looks like the database update is a PR, but has not been merged. Should happen in a day or so. I’ll point out that @chris saved you several days by updating (and approving) the database entry. Bob ---
**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\ **Post date:** [September 19, 2021, 7:42pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/7 "2021-09-19T19:42:45Z")
This is now merged so will be in the next snapshot. ---
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 20, 2021, 6:13am UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/8 "2021-09-20T06:13:07Z")
Thanks! Appreciate it! I will wait for the snapshot then! ---
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 20, 2021, 8:57am UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/9 "2021-09-20T08:57:28Z")
Thanks @chris! I tested the snapshot version of the zwave binding and the channels appeard in the GUI. I haven’t tested if they work but I will later today. ---
**Author:** ![arins](https://community.openhab.org/user_avatar/community.openhab.org/arins/32/72074_2.png) [@arins](https://community.openhab.org/u/arins)\ **Post date:** [September 20, 2021, 12:30pm UTC](https://community.openhab.org/t/nas-ds01z-neo-coolcam-door-sensor/126611/10 "2021-09-20T12:30:02Z")
Thanks @apella12 and @chris I tested the snapshot now and it worked with my zwave device. Great work!