New Modbus openHAB 2.x binding, PaperUI configuration

Setup, Configuration and Use Beginners
2

I have Modbus V2 working. I came from OpenHAB 1.0 so I’m used (and like) textual configuration.
In PaperUI is almost the same, but this is what I did:

modbus.things:

Bridge modbus:tcp:plc [ host=“192.168.1.195”, port=502, id=1 ] {
Bridge poller lampadas [ start=000, length=49, refresh=500, type=“holding” ] {

/*Anexos */

    Thing data LampCozAnexo [ readStart="000", readValueType="int16", writeStart="000", writeValueType="int16", writeType="holding" ]
  Thing data Lamp2VarAnexo [ readStart="001", readValueType="int16", writeStart="001", writeValueType="int16", writeType="holding" ]

Thing data Lamp1VarAnexo [ readStart=“005”, readValueType=“int16”, writeStart=“005”, writeValueType=“int16”, writeType=“holding” ]
Thing data LampFrentGarAnexo [ readStart=“003”, readValueType=“int16”, writeStart=“003”, writeValueType=“int16”, writeType=“holding” ]
//Thing data LampChurascoAnexo [ readStart=“004”, readValueType=“int16”, writeStart=“004”, writeValueType=“int16”, writeType=“holding” ]

Thing data TsxDiaSemana [ readStart=“014”, readValueType=“int16”, writeStart=“014”, writeValueType=“int16”, writeType=“holding” ]
Thing data TsxHoraAtual [ readStart=“016”, readValueType=“int16”, writeStart=“016”, writeValueType=“int16”, writeType=“holding” ]
Thing data TSXMesAtual [ readStart=“017”, readValueType=“int16”, writeStart=“017”, writeValueType=“int16”, writeType=“holding” ]
Thing data TSXAnoAtual [ readStart=“018”, readValueType=“int16”, writeStart=“018”, writeValueType=“int16”, writeType=“holding” ]

}
}

modbus.items:

Switch LampCozAnexo “Lâmpada da cozinha do anexo” (LampAnexos) {channel=“modbus:data:plc:lampadas:LampCozAnexo:switch”}
Switch Lamp2VarAnexo “Lâmpada 2 da varanda do anexo” (LampAnexos) {channel=“modbus:data:plc:lampadas:Lamp2VarAnexo:switch”}
Switch Lamp1VarAnexo “Lâmpada 1 da varanda do anexo” (LampAnexos) {channel=“modbus:data:plc:lampadas:Lamp1VarAnexo:switch”}
Switch LampFrentGarAnexo “Projetor garagem anexo” (LampAnexos) {channel=“modbus:data:plc:lampadas:LampFrentGarAnexo:switch”}
//Switch LampChurascoAnexo “Lâmpada churrasqueira” (LampAnexos) {channel=“modbus:data:plc:sinais:LampChurascoAnexo:switch”}

Number TsxDiaSemana “Dia da semana [%1d]” (gExt) {channel=“modbus:data:plc:lampadas:TsxDiaSemana:number”}
Number TsxHoraAtual “Hora actual [%1d]” (gExt) {channel=“modbus:data:plc:lampadas:TsxHoraAtual:number”}
Number TSXMesAtual “Mês actual [%1d]” (gExt) {channel=“modbus:data:plc:lampadas:TSXMesAtual:number”}
Number TSXAnoAtual “Ano actual [%1d]” (gExt) {channel=“modbus:data:plc:lampadas:TSXAnoAtual:number”}

Hope this helps.

João