micware
(Michiel)
March 5, 2017, 4:12pm
1
Hi,
I recently bought a NODON soft remote.
When I add the soft remote to my Z-Wave network he is not recognized bij openhab 2 (or z-wave binding)
in paper UI en habmin it shows up as Z-Wave Node 10 - Unknown Device
I think i have it online for about 3 days .
I see this item in the z-wave database , i don’t konw if its the same.
On de back on my device I see CRC 6-3-0x
maybe after a few wake up it’s recognised by openhab2
But I can’t find any wake up function is the manual UserGuide
has anybody experience with this device on openhab2?
tandregbg
(Tomas Andre)
January 12, 2018, 6:43pm
2
I bought two of these as well… have you succeeded implementing it in OH?
micware
(Michiel)
January 12, 2018, 7:54pm
3
Yes, got it working (sort off)
It’s a battery device and you have to wake it up a few times before it is fully recognized by openhab
I have a rules like:
rule "Remote (1.0)"
when
Item zwave_device_2x1b7x27_nodeXX_scene_number received update 1.0
then
Lamp on command
end
Update 1.0 closed round dot icon
Update 2.0 plus icon
Update 3.0 open round dot icon
Update 4.0 minus
1 Like
tandregbg
(Tomas Andre)
January 12, 2018, 8:25pm
4
Thank you - I didn´t wait long enough - it works now!
klausO
(Klaus Ostwaldt)
March 16, 2018, 7:44pm
5
Hello all you NODON soft remote users…
I am a little bit disgusted about that thing…
There a times, it´s working fine but there are times where a klick doesn´t show any result.
Have I bought a monday-thing? Or did you experience same issues?
One strange thing i found is, that in the Z-Wave-Networkviewer of Habmin, my softremote is shown as completely standalone - connected with nothing else…
Do you have any Idea, how to get it to work like it should (Configuration etc.)
Thanks in advance
Klaus
klausO
(Klaus Ostwaldt)
March 16, 2018, 8:00pm
6
…an I would like to add: mine is eating batteries!!!