Hi i need some help
After upgrading from 2.1.0 to 2.2.0 my ZWave-binding won’t recongnize my ZME_UZB1 anymore.
Looking up some posts here i think i can exclude the common mistakes.
I’m running OH2 exlusive on a little ATOM board in Ubuntu with openhabian.
Here is what i allready checked:
ls -l /dev/ttyA*
crw-rw---- 1 root dialout 166, 0 Jan 2 18:31 /dev/ttyACM0
sudo less /etc/group
tty:x:5:openhab,garion
dialout:x:20:openhab,garion
sudo nano /etc/default/openhab2
EXTRA_JAVA_OPTS="-Dgnu.io.rxtx.SerialPorts=/dev/ttyUSB0:/dev/ttyS0:/dev/ttyS2:/dev/ttyACM0:/dev/ttyAMA0"
After the upgrade the binding complaind that “Serial Error: Port /dev/ttyACM0 does not exist”
But “ls /dev/ttyA*” says it exists depending on the USB-Stick is pluged in or not.
In the PaperUI the configfield for the serial interface in the binding was empty. By clicking the dropdown i could only choose between:
So i saved that, and now get the errror USB0 is in use, which is correct /dev/USB0 is my mysensors-serial-getway, which still works fine.
Now i have:
as an entry there and get the USB0 in use errror.
After that i used openhabian-config to make apt-get update / upgrade for Ubuntu and rebooted. Still no /dev/ttyACM0 in the dropdown.
Also to be sure let openhabian-config set the permissions for the serials again, and prepaired openhab for commen tty’s again and reboot. No /dev/ttyACM0 in the dropdown.
Between every step i checkd that /dev/ttyACM0 was still there in Ubuntu.
Summary:
Nothing was changed, it worked perfectly in OH2.1.0. I just let openhabian update it self, and then after a reboot upgraded from 2.1.0 to 2.2.0. Now it seams OH or JAVA won’t recongnize the /dev/tttyACM0 while ubuntu clearly can.
In 2.1.0 /dev/ttyAMC0 and /dev/ttyUSB0 where in the dropdown of the binding in paperUI. Now it only shows the /dev/USB0.
And even before i saved the wrong setting, the binding was complaining /dev/tttyACM0 dose not exist. I think because the old setting was still in the database, but 2.2.0 wasn’t able to bring the device over from Ubuntu into OH.
btw the binding is:
Any help would be very apriciated, because i have a nice collection of zwave devices that i hope to use again.
Cu Thomas