OH2 Z-Wave refactoring and testing... and SECURITY

I saw some unexpected behaviour during first start but after a restart and letting the network settle a bit everything is working fine (as always).

20-Jan-2018 20:02:10.853 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 8: Device discovery could not resolve to a thingType! 0002:0005:0003::2.51
20-Jan-2018 20:02:10.857 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 10: Device discovery could not resolve to a thingType! 0154:0100:0201::2.1
20-Jan-2018 20:02:10.857 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 26: Device discovery could not resolve to a thingType! 0060:000D:0001::1.5
20-Jan-2018 20:02:10.860 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 40: Device discovery could not resolve to a thingType! 010F:0501:1002::2.1
20-Jan-2018 20:02:10.862 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 33: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:10.865 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 28: Device discovery could not resolve to a thingType! 010F:0202:1002::2.2
20-Jan-2018 20:02:10.872 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 4: Device discovery could not resolve to a thingType! 010F:0600:1000::25.25
20-Jan-2018 20:02:10.877 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 41: Device discovery could not resolve to a thingType! 010F:0600:1000::25.25
20-Jan-2018 20:02:10.882 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 31: Device discovery could not resolve to a thingType! 010F:0203:1000::3.2
20-Jan-2018 20:02:10.886 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 13: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:10.900 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 23: Device discovery could not resolve to a thingType! 010F:0501:1002::2.1
20-Jan-2018 20:02:10.934 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 12: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:10.939 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 3: Device discovery could not resolve to a thingType! 010F:0800:1001::2.6
20-Jan-2018 20:02:10.944 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 34: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:10.942 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 32: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:10.935 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 11: Device discovery could not resolve to a thingType! 010F:0302:1000::25.25
20-Jan-2018 20:02:11.133 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 36: Device discovery could not resolve to a thingType! 010F:0202:1002::2.2
20-Jan-2018 20:02:11.133 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 39: Device discovery could not resolve to a thingType! 0108:0002:000D::1.18
20-Jan-2018 20:02:11.155 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 37: Device discovery could not resolve to a thingType! 010F:0102:1000::3.3
20-Jan-2018 20:02:11.155 [WARN ] [nhab.binding.zwave.discovery.ZWaveDiscoveryService] - NODE 30: Device discovery could not resolve to a thingType! 010F:0203:1000::3.2

One minor issue though:

20-Jan-2018 20:50:01.669 [INFO ] [col.serialmessage.SerialApiGetInitDataMessageClass] - # Nodes = %d

The node count shows the variable, not the value …

Thanks - I changed a few log entries to fix some static test issues so it’s possible there might be a few errors like this :wink:

It’s unclear to me - did these sort themselves out or is there a database issue here?

After a restart all warnings were gone …

1 Like

Hi Chris, i have the same problem with my “Fibaro Rollershutter 2,FGR-222”.
I have 4 and every thing show me the delete button and are grey.
fibaro roller shutterUnbenannt

I i forget … i use the zwave Binding from 20.01.18 and the release version 2.2 from Dez 17

Thank you,
Joerg

1 Like

Oh sorry havent seen this.
It works … thank you!!

1 Like

Hi,

i think i have the same problem??
Its a Fibaro Plug

Device discovery could not resolve to a thingType! 010F:0600:1000::25.25

I deleted it and readded … but now its in Habmin a unknown device too.
I deleted it again … and the xml file and readded it again. I upload the new created xml file to chris database
i use the zwave Binding from 20.01.18 and the release version 2.2 from Dez 17

I hope this was the right procedure.
Jörg

Please take a look at this thread -:

From looking at your definition, it should work fine though - I’ assuming your device is an FGWP101?

Hi,
After upgrading from openhab 2.1 to 2.2 the zwave binding stopped working.

[ERROR] [ding.zwave.handler.ZWaveThingHandler] - NodeID is not set in zwave:..........

my configuration:
raspberry pi 3 with openhab 2.2.0-1
zwave binding installed via paper ui: binding-zwave - 2.2.0

my zwave.things

Bridge zwave:serial_zstick:controller "ZWave Controller" [ port="/dev/ttyACM-433", controller_softreset="false", controller_master="true", controller_inclusiontimeout=60, heal_enable="true", heal_time=2, security_networkkey="xxxx"] {
	Thing nodon_softremote_00_000		node4 "Node 4"  (zwave:serial_zstick:controller) [ zwave_nodeid=4 ]
}

configuring the things via paperui is not an option, i need the manual thing configuration (remote access).
i also tried the latest org.openhab.binding.zwave-2.3.0-SNAPSHOT.jar version from the first post - but same error message.
any ideas?
Thomas

Quick question about upgrading… I am running OH2 2.2.0 with the zwave jar from this thread back in november: 2.2.0.201711192127. Things are working well.

I tried upgrading to the current Jan 18 jar at the top of this thread (2.3.0.201801212218), but when I restarted and applied the new binding I got a ton of errors on startup.

Are there extra steps needed to upgrade from 2.2.0.201711192127 to 2.3.0.201801212218?

I can post the logs if needed.

TIA
Dave

Did you delete the old jar and drop in the new one? If so, odds are the old one was cached. The new jar’s name is different than the old one, so it didn’t replace it like a regular update would do (same names). Do a bundle:list|grep -i zwave. and you will probably see two versions of the binding installed. Restarting OH may help, or do a bundle:uninstall X, where X is the old bundle ID. Hope this helps!

Yes, I copied the new jar and removed the old. Then started OH2 and did the uninstall on the old and an active on the new. Now it shows:

openhab> bundle:list|grep -i zwave
222 | Active | 80 | 2.3.0.201801212218 | ZWave Binding

which appears correct. Restarted but still getting lots of errors; looks like issues parsing the thing files:

[WARN ] [ig.xml.osgi.XmlDocumentBundleTracker] - The XML document '/ESH-INF/thing/fibaro_fgs222_0_0.xml' in module 'org.openhab.binding.zwave' could not be parsed: The document is invalid, it contains further unsupported data <SNIP>
class               : org.eclipse.smarthome.core.thing.xml.internal.ThingTypeXmlResult
required-type       : org.eclipse.smarthome.core.thing.xml.internal.ThingTypeXmlResult
converter-type      : org.eclipse.smarthome.core.thing.xml.internal.ThingTypeConverter
path                : /thing-descriptions/thing-type
line number         : 272
class[1]            : java.util.ArrayList
converter-type[1]   : com.thoughtworks.xstream.converters.collections.CollectionConverter
class[2]            : org.eclipse.smarthome.core.thing.xml.internal.ThingDescriptionList
converter-type[2]   : org.eclipse.smarthome.core.thing.xml.internal.ThingDescriptionConverter
version             : 1.4.7

See lots of these for different thing files. Full log is on pastebin

Dave

You need to find the correct syntax for your file … search for posts from @sipvoip, he has some examples.

Any way to increase the number of nodes that are initialising? HABmin shows a max of 3 devices in “Node initialising: REQUEST_NIF”. I have 27 IX32 based motion sensors and since they are battery powered they only talk to the controller when there is active motion. Since only 3 devices can be in that initialising state, motion from other sensors is ignored, it requires the motion of the sensors in that state to initialise. If all battery powered devices could be in REQUEST_NIF that network could come up much faster then randomly hoping there is motion in the 3 devices in that state. @chris, is this possible or does it cause other problems?

The root of the issue may be that my IX32 devices don’t wake up unless there is motion rather than waking up every 30 min or something.

This is my zwave.things, hope it helps.

Bridge zwave:serial_zstick:controller "ZWave Controller" [ port="/dev/ttyACM0", controller_softreset="false", controller_master="true", controller_inclusiontimeout=60, heal_enable="true", heal_time=2, security_networkkey="FF 2D 9E 34 21 B1 ED 2B 45 B1 F4 DA 39 A8 B5 F2" 
]

Thing zwave:rtc_ct100plus_00_000:controller:node57 "Node 57: CT100 - First Floor" (zwave:serial_zstick:controller) [ node_id=57, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node3 "Node 03: CT100 - Kitchen" (zwave:serial_zstick:controller) [ node_id=3, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node4 "Node 04: CT100 - Living Room" (zwave:serial_zstick:controller) [ node_id=4, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node5 "Node 05: CT100 - Guest Bedroom" (zwave:serial_zstick:controller) [ node_id=5, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node6 "Node 06: CT100 - Master Bedroom" (zwave:serial_zstick:controller) [ node_id=6, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node7 "Node 07: CT100 - Garage" (zwave:serial_zstick:controller) [ node_id=7, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node8 "Node 08: CT100 - Second Floor" (zwave:serial_zstick:controller) [ node_id=8, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node9 "Node 09: CT100 - Great Room" (zwave:serial_zstick:controller) [ node_id=9, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node10 "Node 10: CT100 - Emma's Bedroom" (zwave:serial_zstick:controller) [ node_id=10, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node11 "Node 11: CT100 - Joshua's Bedroom" (zwave:serial_zstick:controller) [ node_id=11, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node12 "Node 12: CT100 - Breezeway" (zwave:serial_zstick:controller) [ node_id=12, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node13 "Node 13: CT100 - Apartment" (zwave:serial_zstick:controller) [ node_id=13, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node14 "Node 14: CT100 - Mom's Bedroom" (zwave:serial_zstick:controller) [ node_id=14, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node15 "Node 15: CT100 - Dad's Bedroom" (zwave:serial_zstick:controller) [ node_id=15, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node16 "Node 16: CT100 - Office" (zwave:serial_zstick:controller) [ node_id=16, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node17 "Node 17: CT100 - Electric Room" (zwave:serial_zstick:controller) [ node_id=17, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node18 "Node 18: CT100 - Basement Storage" (zwave:serial_zstick:controller) [ node_id=18, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node19 "Node 19: CT100 - Basement" (zwave:serial_zstick:controller) [ node_id=19, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node20 "Node 20: CT100 - Shop" (zwave:serial_zstick:controller) [ node_id=20, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:rtc_ct100_00_000:controller:node21 "Node 21: CT100 - Water Room" (zwave:serial_zstick:controller) [ node_id=21, binding_pollperiod=600 ] {
  Channels:
    Type sensor_temperature : sensor_temperature [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_cooling [ config_scale=1 ]
    Type thermostat_setpoint : thermostat_setpoint_heating [ config_scale=1 ]
}
Thing zwave:homeseer_hswd100_00_000:controller:node22 "Node 22: HSWD100 - Outside Front Door Lights" (zwave:serial_zstick:controller) [ node_id=22 ]
Thing zwave:homeseer_hswd100_00_000:controller:node23 "Node 23: HSWD100 - Outside Front Porch Lights" (zwave:serial_zstick:controller) [ node_id=23 ]
Thing zwave:homeseer_hswd100_00_000:controller:node24 "Node 24: HSWD100 - Outside Back Deck Lights Master" (zwave:serial_zstick:controller) [ node_id=24 ]
Thing zwave:homeseer_hswd100_00_000:controller:node25 "Node 25: HSWD100 - Outside Back Deck Lights Slave" (zwave:serial_zstick:controller) [ node_id=25 ]
Thing zwave:homeseer_hswd100_00_000:controller:node26 "Node 26: HSWD100 - Outside Basement Porch Light" (zwave:serial_zstick:controller) [ node_id=26 ]
Thing zwave:homeseer_hswd100_00_000:controller:node27 "Node 27: HSWD100 - Outside Family Entry Light" (zwave:serial_zstick:controller) [ node_id=27 ]
Thing zwave:homeseer_hswd100_00_000:controller:node28 "Node 28: HSWD100 - Outside Family Entry Recessed Lights" (zwave:serial_zstick:controller) [ node_id=28 ]
Thing zwave:homeseer_hswd100_00_000:controller:node29 "Node 29: HSWD100 - Outside Garage Lights" (zwave:serial_zstick:controller) [ node_id=29 ]
Thing zwave:enerwave_zw20r_00_000:controller:node30 "Node 30: ZW20R - House Outside Outlet A" (zwave:serial_zstick:controller) [ node_id=30 ]
Thing zwave:enerwave_zw20r_00_000:controller:node31 "Node 31: ZW20R - House Outside Outlet B" (zwave:serial_zstick:controller) [ node_id=31 ]
Thing zwave:enerwave_zw20r_00_000:controller:node32 "Node 32: ZW20R - House Outside Outlet C" (zwave:serial_zstick:controller) [ node_id=32 ]
Thing zwave:enerwave_zw20r_00_000:controller:node33 "Node 33: ZW20R - House Outside Outlet D" (zwave:serial_zstick:controller) [ node_id=33 ]
Thing zwave:enerwave_zw20r_00_000:controller:node34 "Node 34: ZW20R - House Outside Outlet E" (zwave:serial_zstick:controller) [ node_id=34 ]
Thing zwave:enerwave_zw20r_00_000:controller:node35 "Node 35: ZW20R - House Outside Outlet F" (zwave:serial_zstick:controller) [ node_id=35 ]
Thing zwave:enerwave_zw20r_00_000:controller:node36 "Node 36: ZW20R - House Outside Outlet G" (zwave:serial_zstick:controller) [ node_id=36 ]
Thing zwave:enerwave_zw20r_00_000:controller:node37 "Node 37: ZW20R - House Outside Outlet H" (zwave:serial_zstick:controller) [ node_id=37 ]
Thing zwave:enerwave_zw20r_00_000:controller:node38 "Node 38: ZW20R - House Outside Outlet I" (zwave:serial_zstick:controller) [ node_id=38 ]
Thing zwave:enerwave_zw20r_00_000:controller:node39 "Node 39: ZW20R - House Outside Outlet J" (zwave:serial_zstick:controller) [ node_id=39 ]
Thing zwave:enerwave_zw20r_00_000:controller:node40 "Node 40: ZW20R - House Outside Outlet K" (zwave:serial_zstick:controller) [ node_id=40 ]
Thing zwave:enerwave_zw20r_00_000:controller:node41 "Node 41: ZW20R - House Outside Outlet L" (zwave:serial_zstick:controller) [ node_id=41 ]
Thing zwave:enerwave_zw20r_00_000:controller:node42 "Node 42: ZW20R - House Outside Outlet M" (zwave:serial_zstick:controller) [ node_id=42 ]
Thing zwave:enerwave_zw20r_00_000:controller:node43 "Node 43: ZW20R - House Outsite Outlet N" (zwave:serial_zstick:controller) [ node_id=43 ] 
Thing zwave:ge_zw4002_00_000:controller:node44 "Node 44: ZW4002 - Master bedroom Fan" (zwave:serial_zstick:controller) [ node_id=44 ] 
Thing zwave:ge_zw4002_00_000:controller:node45 "Node 45: ZW4002 - Outside Deck Fan Slave" (zwave:serial_zstick:controller) [ node_id=45 ] 
Thing zwave:ge_zw4002_00_000:controller:node46 "Node 46: ZW4002 - Outside Deck Fan Master" (zwave:serial_zstick:controller) [ node_id=46 ] 
Thing zwave:ge_zw4002_00_000:controller:node47 "Node 47: ZW4002 - Living Room Fan" (zwave:serial_zstick:controller) [ node_id=47 ] 
Thing zwave:ge_zw4002_00_000:controller:node48 "Node 48: ZW4002 - Great Room Fan" (zwave:serial_zstick:controller) [ node_id=48 ] 
Thing zwave:ge_zw4002_00_000:controller:node49 "Node 49: ZW4002 - Apartment Fan" (zwave:serial_zstick:controller) [ node_id=49 ] 
Thing zwave:yale_yrd446_00_000:controller:node60 "Node 60: YRD446 - Front Door" (zwave:serial_zstick:controller) [ node_id=60 ]
Thing zwave:yale_yrd446_00_000:controller:node61 "Node 61: YRD446 - Family Entry Door" (zwave:serial_zstick:controller) [ node_id=61 ]
Thing zwave:yale_yrd220_00_000:controller:node62 "Node 62: YRD220 - Living Room Deck Door" (zwave:serial_zstick:controller) [ node_id=62 ]
Thing zwave:yale_yrd220_00_000:controller:node65 "Node 65: YRD220 - Office Side Door" (zwave:serial_zstick:controller) [ node_id=65 ]
Thing zwave:yale_yrd220_00_000:controller:node66 "Node 66: YRD220 - Shop Back Door" (zwave:serial_zstick:controller) [ node_id=66 ]
Thing zwave:yale_yrd220_00_000:controller:node67 "Node 67: YRD220 - Pool Storage Room Door" (zwave:serial_zstick:controller) [ node_id=67 ]
Thing zwave:yale_yrd220_00_000:controller:node68 "Node 68: YRD220 - Master Bedroom Deck Door" (zwave:serial_zstick:controller) [ node_id=68 ]
Thing zwave:aeon_zw089_00_000:controller:node70 "Node 70: ZW089 - Shop Back Door" (zwave:serial_zstick:controller) [ node_id=70 ]
Thing zwave:kaipule_ix32_06_000:controller:node73 "Node 73: IX32 - Motion 14" (zwave:serial_zstick:controller) [ node_id=73 ]
Thing zwave:kaipule_ix32_06_000:controller:node73 "Node 74: IX32 - Motion 15" (zwave:serial_zstick:controller) [ node_id=74 ]
Thing zwave:kaipule_ix32_06_000:controller:node75 "Node 75: IX32 - Motion 07" (zwave:serial_zstick:controller) [ node_id=75 ]
Thing zwave:kaipule_ix32_06_000:controller:node76 "Node 76: IX32 - Motion 08" (zwave:serial_zstick:controller) [ node_id=76 ]
Thing zwave:kaipule_ix32_06_000:controller:node77 "Node 77: IX32 - Motion 19" (zwave:serial_zstick:controller) [ node_id=77 ]
Thing zwave:kaipule_ix32_06_000:controller:node78 "Node 78: IX32 - Motion 20" (zwave:serial_zstick:controller) [ node_id=78 ]
Thing zwave:kaipule_ix32_06_000:controller:node79 "Node 79: IX32 - Motion 09" (zwave:serial_zstick:controller) [ node_id=79 ]
Thing zwave:kaipule_ix32_06_000:controller:node80 "Node 80: IX32 - Motion 10" (zwave:serial_zstick:controller) [ node_id=80 ]
Thing zwave:kaipule_ix32_06_000:controller:node81 "Node 81: IX32 - Motion 11" (zwave:serial_zstick:controller) [ node_id=81 ]
Thing zwave:kaipule_ix32_06_000:controller:node82 "Node 82: IX32 - Motion 04" (zwave:serial_zstick:controller) [ node_id=82 ]
Thing zwave:kaipule_ix32_06_000:controller:node83 "Node 83: IX32 - Motion 05" (zwave:serial_zstick:controller) [ node_id=83 ]
Thing zwave:kaipule_ix32_06_000:controller:node84 "Node 84: IX32 - Motion 06" (zwave:serial_zstick:controller) [ node_id=84 ]
Thing zwave:kaipule_ix32_06_000:controller:node85 "Node 85: IX32 - Motion 12" (zwave:serial_zstick:controller) [ node_id=85 ]
Thing zwave:kaipule_ix32_06_000:controller:node86 "Node 86: IX32 - Motion 13" (zwave:serial_zstick:controller) [ node_id=86 ]
Thing zwave:kaipule_ix32_06_000:controller:node87 "Node 87: IX32 - Motion 17" (zwave:serial_zstick:controller) [ node_id=87 ]
Thing zwave:kaipule_ix32_06_000:controller:node88 "Node 88: IX32 - Motion 18" (zwave:serial_zstick:controller) [ node_id=88 ]
Thing zwave:kaipule_ix32_06_000:controller:node89 "Node 89: IX32 - Motion 21" (zwave:serial_zstick:controller) [ node_id=89 ]
Thing zwave:kaipule_ix32_06_000:controller:node90 "Node 90: IX32 - Motion 22" (zwave:serial_zstick:controller) [ node_id=90 ]
Thing zwave:kaipule_ix32_06_000:controller:node91 "Node 91: IX32 - Motion 23" (zwave:serial_zstick:controller) [ node_id=91 ]
Thing zwave:kaipule_ix32_06_000:controller:node92 "Node 92: IX32 - Motion 24" (zwave:serial_zstick:controller) [ node_id=92 ]
1 Like

There is no limitation, and no link between device initialisation states.

I’m really not sure where you are getting this limitation from?

I don’t see any of these errors in your logfile :confused:.

I don’t see any issues with the file so I’m not sure why you get these errors. I also checked the file using another XML checker, and it also shows the format is ok so I’m not really sure what’s up…

I have installed the new binding and am trying to add my Kwikset Smartcode 916 lock to openhab. I can find the lock and add it but not with security enabled. I have tried “forgetting” and refinding it both by excluding it and re-including it from the zwave net and by delting it and refinding it with open had (paper ui). Nothing has worked. I have attacned my debug code below. Any suggestions would be appreciated.

Thanks

12:14:54.362 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from ONLINE to REMOVING
12:14:54.372 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from REMOVING to REMOVED
12:14:54.423 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from REMOVED to UNINITIALIZED
12:14:54.589 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from REMOVED to UNINITIALIZED (HANDLER_MISSING_ERROR)
12:16:48.378 [INFO ] [smarthome.event.InboxAddedEvent      ] - Discovery Result with UID 'zwave:device:654457c4:node2' has been added.
12:16:48.376 [INFO ] [ig.discovery.internal.PersistentInbox] - Added new thing 'zwave:device:654457c4:node2' to inbox.
12:16:48.393 [ERROR] [ding.zwave.handler.ZWaveSerialHandler] - Got I/O exception Input/output error in writeArray during sending. exiting thread.
12:16:54.909 [INFO ] [smarthome.event.InboxRemovedEvent    ] - Discovery Result with UID 'zwave:device:654457c4:node2' has been removed.
12:16:54.925 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from UNINITIALIZED to INITIALIZING
12:16:55.010 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from INITIALIZING to OFFLINE (BRIDGE_OFFLINE): Controller is offline
12:16:55.027 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from OFFLINE (BRIDGE_OFFLINE): Controller is offline to UNINITIALIZED
12:16:55.050 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from UNINITIALIZED to UNINITIALIZED (HANDLER_MISSING_ERROR)
12:16:55.115 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from UNINITIALIZED (HANDLER_MISSING_ERROR) to INITIALIZING
12:16:55.119 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from INITIALIZING to OFFLINE (BRIDGE_OFFLINE): Controller is offline
12:16:55.125 [INFO ] [ome.event.ThingStatusInfoChangedEvent] - 'zwave:device:654457c4:node2' changed from OFFLINE (BRIDGE_OFFLINE): Controller is offline to ONLINE
12:16:55.150 [INFO ] [smarthome.event.ThingUpdatedEvent    ] - Thing 'zwave:device:654457c4:node2' has been updated.
12:16:55.175 [INFO ] [smarthome.event.ThingUpdatedEvent    ] - Thing 'zwave:device:654457c4:node2' has been updated.
12:16:55.194 [INFO ] [smarthome.event.ThingUpdatedEvent    ] - Thing 'zwave:device:654457c4:node2' has been updated.
12:16:55.207 [INFO ] [smarthome.event.ThingUpdatedEvent    ] - Thing 'zwave:device:654457c4:node2' has been updated.

There is an error in your log, but without debug level logging it’s hard to really see what caused it in detail.

I’d suggest to enable debug logging and see what that shows.