Hi, I´m running OH 4.0.2 on a raspberry cm4 Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux everything updated to the latest version yesterday. Now I get an error in the log from a new rule: [ERROR] [internal.handler.ScriptActionHandler] - Script ex…

[image] Items a vendor and technology agnostic open source automation software for your home Accepted commands are UpDown, StopMove, Percent, Refresh

Hi, thanks - I have this in my knx.things Type rollershutter : EG_Fernsehzimmer_Rollo "Rollladen" [ upDown="6/0/16", stopMove="6/0/17" ] When I use the command UP or DOWN in a rule, nothing happens. It only works when I send a START command after it. I also tried to send just “…

Does your knx actuator has group adress for position ?

Maybe you mixed up the GA upDown -> Long Movement (Langzeit) DPT 1.008 stopMove -> Short Movement (Kurzzeit) DPT 1.008 position -> absolute position (command and status) DPT 5.001 Long Movement is used to drive a shutter to open or to close. Short Movement is used to drive a shutter to do a ti…

May thanks for your input. After spending the afternoon in debugging I found a solution. rollershutter.sendCommand(START) doesn’t work anymore - in no rule. Something has been changed from OH 4.0.1 to 4.0.2. rollershutter.sendCommand(DOWN) rollershutter.sendCommand(UP) now works. I think it is…

A maybe more direct way: rule "Rollershutter Control based on Luminance" when Item Helligkeit changed then if(!(Helligkeit.state instanceof Number)) { logWarn("rscontrol", "Invalid luminance value: {}", Helligkeit.state) return; } val iLuminance = (Helligkeit.state a…

Hi, I am experiencing a problem with this rule as it doesn`t allow me to manually open or close the rollershutters via knx anymore. If I want to close the rollershutter during the day the rule is firing and opening the rollershutter. This is clear as the luminance is above 500. I have tried variou…

You misunderstood my ideea was to play with the limits to keep it within a certain lux margin so that afterwords it will not trigger again. Maybe a more elegant solution: var boolean upCommandSent = false var boolean downCommandSent = false rule "Rollershutter Control based on Luminance" when …

openHAB Community

OH4: Script execution of rule failed

Setup, Configuration and Use Scripts & Rules

pkarrer (Paul Karrer) October 10, 2023, 5:03pm 10

no this doesn‘t change anything.