openHAB 2 + KNX Binding 1.9 + ROUTER Mode

[Dim (Angelos)]

@ArPa

As far as I read setting the bus address for openHAB is only for TUNNEL mode?

It’s for both connection types (ROUTER and TUNNEL).

See here:

OH2 - KNX - infinite command loop

Hi @yphyph01, However, I wonder why, with the new OH2 release, the knx binding is not updated to fix this issue. The knx 1.9 binding is not a OH2 Binding, it’s a OH1 Binding with OH2 compatibility. Do not know the state of the KNX OH2 Binding yet, but yes indeed this will be fixed. I don’t understand the ‘busaddr’ parameter. It is used for openHAB to identify and filtering like: Ignoring local Event, received from my local Source address 15.10.1 The default used KNX Groupadress for ope…

I use another KNX/IP Router but here is my /etc/openhab2/services/knx.cfg:

ip=224.0.23.12
busaddr=1.2.200
ignorelocalevents=true
type=ROUTER
localIp=172.16.13.100