Hi guys,
yesterday I made a clean installation of openHAB2. Now I´m trying a very first simple test with my KNX installation. Simply receiving a temperature value from living room, nothing special.
In TUNNEL mode everything works fine and I receive the value immediately after restarting openHAB2. In ROUTER mode I get some errors in log…
2017-02-09 20:09:25.399 [INFO ] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: using network interface eth0
2017-02-09 20:09:25.425 [INFO ] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: multicast loopback mode enabled
2017-02-09 20:09:25.471 [INFO ] [nx.internal.connection.KNXConnection] - Established connection to KNX bus on 224.0.23.12:3671 in mode ROUTER.
2017-02-09 20:09:25.556 [INFO ] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send message to 1/2/2, wait for confirmation
2017-02-09 20:09:25.560 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: cEMI L-Data.ind from 0.0.0 to 1/2/2, low priority hop count 6 tpdu 00 00
2017-02-09 20:09:25.565 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: add to multicast loopback frame buffer: L-Data.ind from 0.0.0 to 1/2/2, low p$
2017-02-09 20:09:25.572 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: sending cEMI frame seq 0, non-blocking, attempt 1 (channel 0) 06 10 05 30 00 $
2017-02-09 20:09:25.581 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: discard multicast loopback cEMI frame: L-Data.ind from 0.0.0 to 1/2/2, low pr$
2017-02-09 20:09:25.586 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send to 1/2/2 succeeded
2017-02-09 20:09:25.606 [DEBUG] [tuwien.auto.calimero ] - process 224.0.23.12:3671: sent group read request to 1/2/2
2017-02-09 20:09:35.590 [INFO ] [tuwien.auto.calimero ] - process 224.0.23.12:3671: timeout waiting for group read response
2017-02-09 20:09:35.594 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Temperature_GF_Living' from KNX bus: timeout waiting for group read resp$
2017-02-09 20:09:35.598 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '1/2/2' = '2'
2017-02-09 20:09:35.653 [INFO ] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send message to 1/2/2, wait for confirmation
2017-02-09 20:09:35.656 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: cEMI L-Data.ind from 0.0.0 to 1/2/2, low priority hop count 6 tpdu 00 00
2017-02-09 20:09:35.661 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: add to multicast loopback frame buffer: L-Data.ind from 0.0.0 to 1/2/2, low p$
2017-02-09 20:09:35.666 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: sending cEMI frame seq 0, non-blocking, attempt 1 (channel 0) 06 10 05 30 00 $
2017-02-09 20:09:35.670 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: discard multicast loopback cEMI frame: L-Data.ind from 0.0.0 to 1/2/2, low pr$
2017-02-09 20:09:35.675 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send to 1/2/2 succeeded
2017-02-09 20:09:35.679 [DEBUG] [tuwien.auto.calimero ] - process 224.0.23.12:3671: sent group read request to 1/2/2
2017-02-09 20:09:45.658 [INFO ] [tuwien.auto.calimero ] - process 224.0.23.12:3671: timeout waiting for group read response
2017-02-09 20:09:45.658 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Temperature_GF_Living' from KNX bus: timeout waiting for group read resp$
2017-02-09 20:09:45.666 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '1/2/2' = '1'
2017-02-09 20:09:45.722 [INFO ] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send message to 1/2/2, wait for confirmation
2017-02-09 20:09:45.724 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: cEMI L-Data.ind from 0.0.0 to 1/2/2, low priority hop count 6 tpdu 00 00
2017-02-09 20:09:45.729 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: add to multicast loopback frame buffer: L-Data.ind from 0.0.0 to 1/2/2, low p$
2017-02-09 20:09:45.734 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: sending cEMI frame seq 0, non-blocking, attempt 1 (channel 0) 06 10 05 30 00 $
2017-02-09 20:09:45.738 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: discard multicast loopback cEMI frame: L-Data.ind from 0.0.0 to 1/2/2, low pr$
2017-02-09 20:09:45.742 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send to 1/2/2 succeeded
2017-02-09 20:09:45.748 [DEBUG] [tuwien.auto.calimero ] - process 224.0.23.12:3671: sent group read request to 1/2/2
2017-02-09 20:09:55.725 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Temperature_GF_Living' from KNX bus: timeout waiting for group read resp$
2017-02-09 20:09:55.728 [INFO ] [tuwien.auto.calimero ] - process 224.0.23.12:3671: timeout waiting for group read response
2017-02-09 20:09:55.731 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Remaining retries for address '1/2/2' = '0'
2017-02-09 20:09:55.787 [INFO ] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send message to 1/2/2, wait for confirmation
2017-02-09 20:09:55.790 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: cEMI L-Data.ind from 0.0.0 to 1/2/2, low priority hop count 6 tpdu 00 00
2017-02-09 20:09:55.795 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: add to multicast loopback frame buffer: L-Data.ind from 0.0.0 to 1/2/2, low p$
2017-02-09 20:09:55.798 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: sending cEMI frame seq 0, non-blocking, attempt 1 (channel 0) 06 10 05 30 00 $
2017-02-09 20:09:55.804 [DEBUG] [tuwien.auto.calimero ] - KNXnet/IP Routing 224.0.23.12:3671: discard multicast loopback cEMI frame: L-Data.ind from 0.0.0 to 1/2/2, low pr$
2017-02-09 20:09:55.809 [DEBUG] [tuwien.auto.calimero ] - calimero.link.224.0.23.12:3671: send to 1/2/2 succeeded
2017-02-09 20:09:55.813 [DEBUG] [tuwien.auto.calimero ] - process 224.0.23.12:3671: sent group read request to 1/2/2
2017-02-09 20:10:05.791 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Cannot read value for item 'Temperature_GF_Living' from KNX bus: timeout waiting for group read resp$
2017-02-09 20:10:05.794 [WARN ] [al.bus.KNXBindingDatapointReaderTask] - Autorefresh: Give up, could not read address '1/2/2' after '3' retries.
2017-02-09 20:10:05.794 [INFO ] [tuwien.auto.calimero ] - process 224.0.23.12:3671: timeout waiting for group read response
Is this a known issue? Does the combination openHAB2 and KNX 1.9 binding not work in ROUTER mode?
Best regards!