# openHABian hassle-free openHAB Setup **URL:** \ **Category:** Server\ **Tags:** raspberry, setup, openhabian\ **Created:** [August 19, 2016, 12:28am UTC](https://community.openhab.org/t/openhabian-hassle-free-openhab-setup/13379 "2016-08-19T00:28:53Z")\ **Posts on this page:** 1\ **Showing post:** 153
**Author:** ![ThomDietrich](https://community.openhab.org/user_avatar/community.openhab.org/thomdietrich/32/71239_2.png) [@ThomDietrich](https://community.openhab.org/u/ThomDietrich)\ **Post date:** [September 28, 2016, 4:51pm UTC](https://community.openhab.org/t/openhabian-hassle-free-openhab-setup/13379/153 "2016-09-28T16:51:56Z")
> [@KjetilA](#): > > 1. Downloaded the standalone ARM binaries for InfluxDB and fired it up. Seems to work OK (at least the system is reported as running, and the web interface is responsive). > > - I have not yet figured out where to put the various files - binaries and configuration - and how to make it start as a service. Hello @KjetilA, a short update on that topic. Here are the steps to get InfluxDB up and running: [openhabian/openhabian-setup.sh at main · openhab/openhabian · GitHub](https://github.com/ThomDietrich/openhabian/blob/master/openhabian-setup.sh#L493-L501) The second part is the installation of Grafana. There was a mentioning regarding this over in the [InfluxDB+Grafana thread](https://community.openhab.org/t/influxdb-grafana-persistence-and-graphing/13761/56) but I didn’t get it to work. @fg2it thanks for the detailed instructions in your [github README](https://github.com/fg2it/grafana-on-raspberry/blob/master/wheezy-jessie/README.md). I was not able to get the binaries installed on my ARMv6 architecture RPi1, neither did I get the build process to finish without errors. Maybe @KjetilA could test the binaries on ARMv7. I would be okay with binaries only for ARMv7 as the RPi 1 is not officially recommended for the use with openHAB and will be used less and less. --- _[View the full topic](https://community.openhab.org/t/openhabian-hassle-free-openhab-setup/13379)._