Main documentation for openHAB3 OpenWebNet binding >>> Readme General information discussion >>> [image] BTicino/Legrand Home automation general discussions: openwebnet protocol Home Automation @massi This thread is for general discussions on BTicino/Legran…

[image] massi: If you wnat you can suggest some changes in the README to give suggestion about the auto-stop setting (note: it’s also important to be very concise in the README) OK, I get it now. The missing part for me was that auto-calibration only works when the auto-stop of the actuator …

[image] the-ninth: OK, I get it now. The missing part for me was that auto-calibration only works when the auto-stop of the actuator is set to actual runtime. Consequently, auto-calibration is only usable if you have those newer actuators where you actually can change the auto-stop time. On min…

Hi all, It’s been a while since I posted. I know this is not the right forum couldn’t find another thread. I have found this, but it is an old one ( BTicino Home + Control binding ) I have been happily running my MyHomeServer1 with OH 3.3.x for quite some time. at the end of Jan 2023, MyHomeUp will…

[image] massi: that is exactly the point. So improving the docs in that direction would be a valuable contribution. Try to be as much concise as possible! After giving this some more thought, I am still not yet sure if we have completely covered this issue and if the 60 seconds fixed auto-sto…

I dont use the auto calibration. I timed each blind and entered that.

[image] the-ninth: Given these points, I am not sure if the auto calibration feature is not fundamentally flawed? If binding is not influenced by the actual runtime and the issue is in the correlation between shutterRun and auto-stop, then setting the auto-stop correctly to actual runtime will …

Hi Massimo, thanks for the explanation! [image] massi: This can be achieved via MyHome_Suite software (virtual configuration) or via jumpers (physical configuration, on older modules) with 5s steps. It seems our F411/2 actuators do not have that option, neither via jumpers nor in the virtual…

[image] the-ninth: It seems our F411/2 actuators do not have that option, neither via jumpers nor in the virtual configuration in the My Home Suite. I was looking to this datasheet where in 2.2 they explain the Timed stop Maybe there are different versions.. [image] the-ninth: OK, I hav…

[image] massi: I was looking to this datasheet where in 2.2 they explain the Timed stop Maybe there are different versions… Yes, it seems that has been improved in newer revisions of the F411/2. However, when looking at the older documentation I now realize that there is such an option as w…

[image] massi: Yes, if you set log level to DEBUG (both for binding and openwebnet4j lib, as per instructions), remove the shutter Thing+Item (better also disable all other Things that are not relevant), move with physical control the shutter to 50%, then add again the shutter Thing/Item and the…

[openWebNet/BTicino] openHAB3

Add-ons Bindings

massi (Massimo) January 12, 2024, 9:20am 199

Since the other OpenWebNet openHAB4 thread was closed, I opened a new general thread for discussion and support on the OpenWebNet BTicino binding.

Support for the binding and its configurations/issues will be done on the following new thread: