# Provide binding for broadlink pro

**URL:** <https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294>\
**Category:** Beginners\
**Created:** [November 17, 2015, 12:50pm UTC](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294 "2015-11-17T12:50:21Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![sir\_luddite](https://community.openhab.org/user_avatar/community.openhab.org/sir_luddite/32/71645_2.png) [@sir\_luddite](https://community.openhab.org/u/sir_luddite)\
**Post date:** [December 13, 2016, 1:07pm UTC](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294/21 "2016-12-13T13:07:30Z")

</div>

Thanks Davor, I will be using the android toolkit to do everything I think

- [http://leffab.wixsite.com/domo-assist/web-builder](http://leffab.wixsite.com/domo-assist/web-builder)
- [fuyaode/rm-bridge-server - Docker Image](https://hub.docker.com/r/fuyaode/rm-bridge-server/) ← rm bridge 1.2 pre-installed. I will update it to 1.3.1 ftw!!!

I will test on the weekend.

---

<div class="post-metadata">

**Author:** ![opendf2017](https://community.openhab.org/letter_avatar_proxy/v4/letter/o/fbc32d/32.png) [@opendf2017](https://community.openhab.org/u/opendf2017)\
**Post date:** [April 3, 2017, 9:41am UTC](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294/22 "2017-04-03T09:41:55Z")

</div>

Im using the broadlink to control AV and RF sockets with Alexa and all is fine.

I want to add these devices though to Openhab to setup some automation.

In Alexa the items from RM bridge are detected as Hue Light.

Does this mean that they should be detectable by Openhab the same way as Hue bridge and bulbs are ?

Thanks

---

<div class="post-metadata">

**Author:** ![shorty707](https://community.openhab.org/letter_avatar_proxy/v4/letter/s/8dc957/32.png) [@shorty707](https://community.openhab.org/u/shorty707)\
**Post date:** [June 5, 2017, 8:00am UTC](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294/23 "2017-06-05T08:00:35Z")

</div>

> [@Broadlink binding for RMx, A1, SPx and MP. Any interest?](https://community.openhab.org/t/broadlink-binding-for-rmx-a1-spx-and-mp-any-interest/22768):
>
> Hi, I have developed a binding for Broadlink devices, it currently supports RMx, A1, SPx and MP1. The last two haven’t been tested since I don’t have these devices. It’s been running on my test system for about a week now and everything works fine. The communication with the various Broadlink devices are encrypted so it uses a key that someone somehow obtained (possibly through reverse engineering). Anyhow I have sent an email to Kai to get some clarification around openHABs stand on allowing …

---

<div class="post-metadata">

**Author:** ![nakh\_Home](https://community.openhab.org/user_avatar/community.openhab.org/nakh_home/32/19923_2.png) [@nakh\_Home](https://community.openhab.org/u/nakh_Home)\
**Post date:** [July 31, 2017, 10:45am UTC](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294/24 "2017-07-31T10:45:09Z")

</div>

Hi

did you succeed to manage it ?

G

[Previous page](https://community.openhab.org/t/provide-binding-for-broadlink-pro/4294.md?page=1)