# Raspberry Pi or Arduino custom sensors? **URL:** \ **Category:** Home Automation\ **Created:** [March 7, 2016, 5:38am UTC](https://community.openhab.org/t/raspberry-pi-or-arduino-custom-sensors/8373 "2016-03-07T05:38:51Z")\ **Posts on this page:** 1\ **Showing post:** 19
**Author:** ![christoph\_wempe](https://community.openhab.org/user_avatar/community.openhab.org/christoph_wempe/32/70848_2.png) [@christoph\_wempe](https://community.openhab.org/u/christoph_wempe)\ **Post date:** [March 19, 2016, 5:52pm UTC](https://community.openhab.org/t/raspberry-pi-or-arduino-custom-sensors/8373/19 "2016-03-19T17:52:52Z")
This might also be interessting for you. > [@\[Framework\] Homie for ESP8266](https://community.openhab.org/t/framework-homie-for-esp8266/8674): > > After I purchased some ESP8266-boards (NodeMCU v1.0 and WeMos D1 mini) I was looking for an easy way to connect them via wifi to an mqtt broker. I found this framework called “Homie for ESP8266” [https://github.com/marvinroger/homie-esp8266](https://github.com/marvinroger/homie-esp8266) The “bare minimum sketch” (“Hello World”) is only 10 lines of code and provides everything to connect to your wifi, your mqtt broker and sending general information. It startes as an access point on configuration mode after flashing. With a simple app (W… --- _[View the full topic](https://community.openhab.org/t/raspberry-pi-or-arduino-custom-sensors/8373)._