# Sensibo API Integration - Based on Rules

**URL:** <https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222>\
**Category:** Scripts & Rules\
**Created:** [May 31, 2017, 2:39am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222 "2017-05-31T02:39:44Z")\
**Posts on this page:** 12\
**Page:** 3

<div class="post-metadata">

**Author:** ![rkrisi](https://community.openhab.org/user_avatar/community.openhab.org/rkrisi/32/68680_2.png) [@rkrisi](https://community.openhab.org/u/rkrisi)\
**Post date:** [November 30, 2018, 10:03pm UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/42 "2018-11-30T22:03:50Z")

</div>

Are there here anyone planning to make a binding for this one?

---

<div class="post-metadata">

**Author:** ![NGC3372](https://community.openhab.org/letter_avatar_proxy/v4/letter/n/ac91a4/32.png) [@NGC3372](https://community.openhab.org/u/NGC3372)\
**Post date:** [January 4, 2019, 12:57am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/43 "2019-01-04T00:57:56Z")

</div>

> [@TTLucian](#):
>
> 400 BadRequest - Sensibo 400 BadRequest POST data is not valid JSON

I still have that error message on macOS. First of all I had to change the following line:

```csv
UpdateResult = executeCommandLine('curl@@-sSH@@"Content-Type: application/json"@@-XPOST@@' + CommandURL + '@@-d@@'+ CommandData, 10000)`

```

To (included additional code for proper understanding):

```csv
var String CommandURL = 'https://home.sensibo.com/api/v2/pods/' + PodID + '/acStates?apiKey=' + APIKey

var String CommandState = '{"acState":{"on":' + PodBoolean + ','
var String CommandMode = '"mode":"' + SensiboMode.state + '",'
var String CommandFan = '"fanLevel":"' + SensiboFan.state + '",'
var String CommandSwing = ""

if (SensiboSwing.state != "")
  { CommandSwing = '"swing":"' + SensiboSwing.state + '"}}' }

var String CommandTemp = '"targetTemperature":' + (SensiboTarget.state as DecimalType).intValue + ','
var String CommandTempUnit = '"temperatureUnit":"C",'
var String CommandData = CommandState + CommandMode + CommandFan + CommandTemp + CommandTempUnit + CommandSwing

var String UpdateResult
var Number Attempts = 0

var CommandExec = "curl -sSH \"Accept: application/json\" -H \"Content-Type: application/json\" -X POST -d \'" + CommandData + "\' " + CommandURL

...

UpdateResult = executeCommandLine(CommandExec, 10000)

```

As before it was throwing different error messages like URL is incorrect, syntax is incorrect etc. For some reason macOS doesn’t like @@. After replacing @@ with just spaces and slightly changing the structure of the curl request it started sending requests to Sensibo. But it returns ‘400 BadRequest - Sensibo 400 BadRequest POST data is not valid JSON’. At the same time if I execute the same command from the command line it works perfectly

```csv
curl -sSH "Accept: application/json" -H "Content-Type: application/json" -X POST -d '{"acState":{"on":true,"mode":"cool","fanLevel":"auto","targetTemperature":24,"temperatureUnit":"C","swing":"stopped"}}' https://home.sensibo.com/api/v2/pods/<PodID>/acStates?apiKey=<APIKey>

```

PodID and APIKey have been removed for obvious reasons, but that line executed from CLI works perfectly. It turns on A/C and returns proper response from Sensibo. While this command executed in openHAB it just gives ‘POST data is not valid JSON’. Don’t understand why… Anything I’m missing?

Tried to use

```csv
logInfo("Sensibo Exec:", CommandExec)

```

And it gives the perfect CLI line, but still doesn’t work from the code.

Any help would be highly appreciated! I’m really new to openHAB and Java…

---

<div class="post-metadata">

**Author:** ![denominator](https://community.openhab.org/user_avatar/community.openhab.org/denominator/32/37349_2.png) [@denominator](https://community.openhab.org/u/denominator)\
**Post date:** [March 2, 2019, 11:05pm UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/44 "2019-03-02T23:05:39Z")

</div>

Did you end up getting it working I having the same result

```
<html><head><title>400 BadRequest - Sensibo</title></head><body><h>400 BadRequest</h><p>POST data is not valid JSON</p><body></html>

```

---

<div class="post-metadata">

**Author:** ![NGC3372](https://community.openhab.org/letter_avatar_proxy/v4/letter/n/ac91a4/32.png) [@NGC3372](https://community.openhab.org/u/NGC3372)\
**Post date:** [March 3, 2019, 4:26am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/45 "2019-03-03T04:26:40Z")

</div>

Yes, I managed to fix it. It was the issue with syntax. Here is the correct line that works for me,

```csv
var CommandExec = 'curl@@-sSH@@"Accept: application/json"@@-H@@"Content-Type: application/json"@@-X@@POST@@-d@@' + CommandData + '@@' + CommandURL

```

Let me know if you want the entire file.

---

<div class="post-metadata">

**Author:** ![denominator](https://community.openhab.org/user_avatar/community.openhab.org/denominator/32/37349_2.png) [@denominator](https://community.openhab.org/u/denominator)\
**Post date:** [March 3, 2019, 5:36am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/46 "2019-03-03T05:36:55Z")

</div>

Thanks that works great

---

<div class="post-metadata">

**Author:** ![denominator](https://community.openhab.org/user_avatar/community.openhab.org/denominator/32/37349_2.png) [@denominator](https://community.openhab.org/u/denominator)\
**Post date:** [March 3, 2019, 10:23am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/47 "2019-03-03T10:23:01Z")

</div>

So with the help I got here I got it all working. My goal is to have controls on my HASP plate (touch screen that replaces wall switched).  
I needed the pod state to mainly be stored in the sensibo api so I changed the code a little. Instead of posting changes I will just post the files It updates every 5 min but I will change it to update when I change to that page on the touchscreen.

```csv
sitemap sensibo label="Sensibo" {
  Frame label="Sensibo Living" {
    Switch item=Sensibo_Living_State label="Sensibo_Living_State" mappings=["true"="ON", "false"="OFF"] icon="switch"                              
    Switch item=Sensibo_Living_Mode label="Mode" icon="heating" mappings=[cool="Cool",heat="Heat",fan="Fan"]
    Setpoint item=Sensibo_Living_Target label="Target [%.0f ºC]" icon="temperature" minValue=18 maxValue=26 step=1.0
    Switch item=Sensibo_Living_Fan label="Fan" icon="fan" mappings=[low="Low",medium="Med",high="High",auto="Auto"]
    Switch item=Sensibo_Living_Swing label="Swing" icon="fan" mappings=[stopped="Stop",fixedMiddle="Middle",fixedTop="High",rangeFull="Swing"]
    Text item=Sensibo_Living_Temp label="Temperature [%.1f ºC]" icon="temperature"
    Text item=Sensibo_Living_Humidity label="Humidity [%.0f %%]" icon="water"
   // Text item=Sensibo_Living_Battery label="Battery [%d mV]" icon="energy"
  }
  
  Frame label="Sensibo Bedroom" {
    Switch item=Sensibo_Bedroom_State label="Sensibo Bedroom State" mappings=["true"="ON", "false"="OFF"] icon="switch"
    Switch item=Sensibo_Bedroom_Mode label="Mode" icon="heating" mappings=[cool="Cool",heat="Heat",fan="Fan"]
    Setpoint item=Sensibo_Bedroom_Target label="Target [%.0f ºC]" icon="temperature" minValue=18 maxValue=26 step=1.0
    Switch item=Sensibo_Bedroom_Fan label="Fan" icon="fan" mappings=[low="Low",medium="Med",high="High",auto="Auto"]
    Switch item=Sensibo_Bedroom_Swing label="Swing" icon="fan" mappings=[stopped="Stop",fixedMiddle="Middle",fixedTop="High",rangeFull="Swing"]
    Text item=Sensibo_Bedroom_Temp label="Temperature [%.1f ºC]" icon="temperature"
    Text item=Sensibo_Bedroom_Humidity label="Humidity [%.0f %%]" icon="water"
   // Text item=Sensibo_Bedroom_Battery label="Battery [%d mV]" icon="energy"
  }
}

```

Items

```csv
String Sensibo_Living_State  
Number Sensibo_Living_Temp
Number Sensibo_Living_Humidity
Number Sensibo_Living_Battery
Number Sensibo_Living_Target
String Sensibo_Living_Fan
String Sensibo_Living_Mode
String Sensibo_Living_Swing

String Sensibo_Bedroom_State
Number Sensibo_Bedroom_Temp
Number Sensibo_Bedroom_Humidity
Number Sensibo_Bedroom_Battery
Number Sensibo_Bedroom_Target
String Sensibo_Bedroom_Fan
String Sensibo_Bedroom_Mode
String Sensibo_Bedroom_Swing

```

Rules  
You need to enter your own apikey and podid

```csv
/ ***openHAB Sensibo Rules*** /

// Goto the website https://home.sensibo.com/me/api first and create APIKey

val String APIKey = ""

var PodID_01 = "" //Living 
var PodID_02 = "" //Bedroom

rule "Read Sensibo State PodID_01"

  when
    System started or
    Time cron "0 0/5 * * * ?" //Update states from senibo every 5 min
  then

  //Thread::sleep(1000)

  try {
    var String PodStatus 
      
    do {
      Thread::sleep(5000)
      PodStatus = executeCommandLine('curl -sSH "Accept: application/json" "https://home.sensibo.com/api/v2/pods/' + PodID_01 + '/acStates?apiKey=' + APIKey + '&limit=1&fields=acState"', 5000)
      //logInfo("Sensibo result - PodStatus", PodStatus)
    } while (!PodStatus.contains('"status": "success"'))
    
    val String PodOn = (transform("JSONPATH", "$.result[0].acState.on", PodStatus))
    val String PodMode = (transform("JSONPATH", "$.result[0].acState.mode", PodStatus))
    val Number PodTarget = new Integer(transform("JSONPATH", "$.result[0].acState.targetTemperature", PodStatus))
    val String PodFan = (transform("JSONPATH", "$.result[0].acState.fanLevel", PodStatus))

    postUpdate(Sensibo_Living_State, PodOn)
    postUpdate(Sensibo_Living_Target, PodTarget)
    postUpdate(Sensibo_Living_Mode, PodMode)
    postUpdate(Sensibo_Living_Fan, PodFan)

    if (PodStatus.contains('"swing": ')) {
      val String PodSwing = (transform("JSONPATH", "$.result[0].acState.swing", PodStatus))
      postUpdate(Sensibo_Living_Swing, PodSwing)
    }
  }

  catch(Throwable t) {
    logError("Sensibo read state", "Error was caught: {}", t)
  }

end

rule "Read Sensibo Measurements PodID_01"

  when
    Time cron "0 0/5 * * * ?" //Update states from senibo every 5 min
  then

  try {
    var String PodMeasurements
      
    do {
      PodMeasurements = executeCommandLine('curl -sSH "Accept: application/json" "https://home.sensibo.com/api/v2/pods/' + PodID_01 + '/measurements?apiKey=' + APIKey + '&fields=temperature,humidity,batteryVoltage"', 5000)
      //logInfo("Sensibo result - PodMeasurements", PodMeasurements)
      Thread::sleep(5000)
    } while (!PodMeasurements.contains('"status": "success"'))
        
    var PodTemperature = new Double(transform("JSONPATH", "$.result[0].temperature", PodMeasurements))
    var PodHumidity = new Double(transform("JSONPATH", "$.result[0].humidity", PodMeasurements))

    postUpdate(Sensibo_Living_Temp, PodTemperature)
    postUpdate(Sensibo_Living_Humidity, PodHumidity)

    if (!PodMeasurements.contains('"batteryVoltage": null')) {
      val Number PodBattery = new Integer(transform("JSONPATH", "$.result[0].batteryVoltage", PodMeasurements))
      postUpdate(Sensibo_Living_Battery, PodBattery)
    }
  }
  
  catch(Throwable e) {
    logError("Sensibo measurements", "Error was caught: {}", e)
  }

end

rule "Write Sensibo State PodID_01"

  when
    Item Sensibo_Living_State received command or
    Item Sensibo_Living_Mode received command or
    Item Sensibo_Living_Fan received command or
    Item Sensibo_Living_Swing received command or
    Item Sensibo_Living_Target received command
  then
  
  try {

    //Thread::sleep(1000) // Avoid race condition where state has not yet been updated

    var CommandURL = 'https://home.sensibo.com/api/v2/pods/' + PodID_01 + '/acStates?apiKey=' + APIKey

    var CommandState = '{"acState":{"on":' + Sensibo_Living_State.state + ','
    var CommandMode = '"mode":"' + Sensibo_Living_Mode.state + '",'
    var CommandFan = '"fanLevel":"' + Sensibo_Living_Fan.state + '",'
    var CommandSwing = ""

    if (Sensibo_Living_Swing.state != "")
      { CommandSwing = '"swing":"' + Sensibo_Living_Swing.state + '"}}' }

    var String CommandTemp = '"targetTemperature":' + (Sensibo_Living_Target.state as DecimalType).intValue + ','
    var String CommandTempUnit = '"temperatureUnit":"C",'
    var String CommandData = CommandState + CommandMode + CommandFan + CommandTemp + CommandTempUnit + CommandSwing

    var String UpdateResult
    var Number Attempts = 0

    var CommandExec = 'curl@@-sSH@@"Accept: application/json"@@-H@@"Content-Type: application/json"@@-X@@POST@@-d@@' + CommandData + '@@' + CommandURL
  
    do {
      Attempts += 1
      //logInfo("Sensibo command", CommandData)
      UpdateResult = executeCommandLine(CommandExec, 10000)
      //logInfo("Sensibo result", UpdateResult)
      Thread::sleep(5000)
    } while (!UpdateResult.contains('"status": "success"') && Attempts < 5)
  
    if (Attempts == 5) {
      logError("Sensibo write", "5 failures updating Sensibo")
    }      
  }

  catch(Throwable t) {
    logError("Sensibo write", "Error was caught: {}", t)
  }

end

/ ***Bedroom Sensibo*** /

rule "Read Sensibo State PodID_02"

  when
    System started or
    Time cron "0 0/5 * * * ?" //Update states from senibo every 5 min
  then

  //Thread::sleep(1000)

  try {
    var String PodStatus 
      
    do {
      Thread::sleep(5000)
      PodStatus = executeCommandLine('curl -sSH "Accept: application/json" "https://home.sensibo.com/api/v2/pods/' + PodID_02 + '/acStates?apiKey=' + APIKey + '&limit=1&fields=acState"', 5000)
      //logInfo("Sensibo result - PodStatus", PodStatus)
    } while (!PodStatus.contains('"status": "success"'))
    
    val String PodOn = (transform("JSONPATH", "$.result[0].acState.on", PodStatus))
    val String PodMode = (transform("JSONPATH", "$.result[0].acState.mode", PodStatus))
    val Number PodTarget = new Integer(transform("JSONPATH", "$.result[0].acState.targetTemperature", PodStatus))
    val String PodFan = (transform("JSONPATH", "$.result[0].acState.fanLevel", PodStatus))

    postUpdate(Sensibo_Bedroom_State, PodOn)
    postUpdate(Sensibo_Bedroom_Target, PodTarget)
    postUpdate(Sensibo_Bedroom_Mode, PodMode)
    postUpdate(Sensibo_Bedroom_Fan, PodFan)

    if (PodStatus.contains('"swing": ')) {
      val String PodSwing = (transform("JSONPATH", "$.result[0].acState.swing", PodStatus))
      postUpdate(Sensibo_Bedroom_Swing, PodSwing)
    }
  }

  catch(Throwable t) {
    logError("Sensibo read state", "Error was caught: {}", t)
  }

end

rule "Read Sensibo Measurements PodID_02"

  when
    Time cron "0 0/5 * * * ?" //Update states from senibo every 5 min
  then

  try {
    var String PodMeasurements
      
    do {
      PodMeasurements = executeCommandLine('curl -sSH "Accept: application/json" "https://home.sensibo.com/api/v2/pods/' + PodID_02 + '/measurements?apiKey=' + APIKey + '&fields=temperature,humidity,batteryVoltage"', 5000)
      //logInfo("Sensibo result - PodMeasurements", PodMeasurements)
      Thread::sleep(5000)
    } while (!PodMeasurements.contains('"status": "success"'))
        
    var PodTemperature = new Double(transform("JSONPATH", "$.result[0].temperature", PodMeasurements))
    var PodHumidity = new Double(transform("JSONPATH", "$.result[0].humidity", PodMeasurements))

    postUpdate(Sensibo_Bedroom_Temp, PodTemperature)
    postUpdate(Sensibo_Bedroom_Humidity, PodHumidity)

    if (!PodMeasurements.contains('"batteryVoltage": null')) {
      val Number PodBattery = new Integer(transform("JSONPATH", "$.result[0].batteryVoltage", PodMeasurements))
      postUpdate(Sensibo_Bedroom_Battery, PodBattery)
    }
  }
  
  catch(Throwable e) {
    logError("Sensibo measurements Bedroom", "Error was caught: {}", e)
  }

end

rule "Write Sensibo State PodID_02"

  when
    Item Sensibo_Bedroom_State received command or
    Item Sensibo_Bedroom_Mode received command or
    Item Sensibo_Bedroom_Fan received command or
    Item Sensibo_Bedroom_Swing received command or
    Item Sensibo_Bedroom_Target received command
  then
  
  try {

    //Thread::sleep(1000) // Avoid race condition where state has not yet been updated

    var CommandURL = 'https://home.sensibo.com/api/v2/pods/' + PodID_02 + '/acStates?apiKey=' + APIKey

    var CommandState = '{"acState":{"on":' + Sensibo_Bedroom_State.state + ','
    var CommandMode = '"mode":"' + Sensibo_Bedroom_Mode.state + '",'
    var CommandFan = '"fanLevel":"' + Sensibo_Bedroom_Fan.state + '",'
    var CommandSwing = ""

    if (Sensibo_Bedroom_Swing.state != "")
      { CommandSwing = '"swing":"' + Sensibo_Bedroom_Swing.state + '"}}' }

    var String CommandTemp = '"targetTemperature":' + (Sensibo_Bedroom_Target.state as DecimalType).intValue + ','
    var String CommandTempUnit = '"temperatureUnit":"C",'
    var String CommandData = CommandState + CommandMode + CommandFan + CommandTemp + CommandTempUnit + CommandSwing

    var String UpdateResult
    var Number Attempts = 0

    var CommandExec = 'curl@@-sSH@@"Accept: application/json"@@-H@@"Content-Type: application/json"@@-X@@POST@@-d@@' + CommandData + '@@' + CommandURL
  
    do {
      Attempts += 1
      //logInfo("Sensibo command", CommandData)
      UpdateResult = executeCommandLine(CommandExec, 10000)
      //logInfo("Sensibo result", UpdateResult)
      Thread::sleep(5000)
    } while (!UpdateResult.contains('"status": "success"') && Attempts < 5)
  
    if (Attempts == 5) {
      logError("Sensibo write", "5 failures updating Sensibo")
    }      
  }

  catch(Throwable t) {
    logError("Sensibo write", "Error was caught: {}", t)
  }

end

```

I hope this helps someone and this wan’t possible without the help from the other users above.

---

<div class="post-metadata">

**Author:** ![omdaddi](https://community.openhab.org/user_avatar/community.openhab.org/omdaddi/32/31623_2.png) [@omdaddi](https://community.openhab.org/u/omdaddi)\
**Post date:** [July 7, 2019, 7:19am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/48 "2019-07-07T07:19:27Z")

</div>

For anyone starting from scratch, and wanting a short cut to getting this working:

- Copy the files in to the correct folders (follow the file extension)
- Remove the battery lines in .items and .sitemap if you have a Sensibo Sky
- Make sure you have the JSONPath Transformation installed (Paper UI \> Configuration \> Bindings \> Add (+) \> Transformations
- Follow the documentation and add an API key (I called mine “apiKey”), then add the key to the top of the .rules file
- restart OpenHab (many ways to do this, I do _sudo systemctl stop openhab2.service_, then _sudo systemctl start openhab2.service_ in console

Then it works beautifully. THANK YOU for the integration.

---

<div class="post-metadata">

**Author:** ![denominator](https://community.openhab.org/user_avatar/community.openhab.org/denominator/32/37349_2.png) [@denominator](https://community.openhab.org/u/denominator)\
**Post date:** [July 7, 2019, 1:05pm UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/49 "2019-07-07T13:05:19Z")

</div>

their is a binding now you can use

> [@Binding for Sensibo Sky available](https://community.openhab.org/t/binding-for-sensibo-sky-available/68193):
>
> Hi. I’m new to home automation and after being burned by HASSIO, I made the switch to openHAB only to notice that there’s no integration for my A/C controller. Well since today there’s an early version of my binding available for testing (pull request can be found on github). It is still work in progress and the features are limited, but I was able to read and set the state of my A/C successfully. I hope enough people will test it, so all errors and mistakes can be found. Release Information S…

---

<div class="post-metadata">

**Author:** ![gyzod](https://community.openhab.org/user_avatar/community.openhab.org/gyzod/32/31075_2.png) [@gyzod](https://community.openhab.org/u/gyzod)\
**Post date:** [July 17, 2019, 2:08am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/50 "2019-07-17T02:08:10Z")

</div>

Had the same problem but managed to fix it in a more “elegant” way by replacing all the executeCommandLine with sendHttpGetRequest and sendHttpPostRequest methods. I guess those methods are more efficient than execute a curl command using a shell.

> PodMeasurements = sendHttpGetRequest(“[https://home.sensibo.com/api/v2/pods/](https://home.sensibo.com/api/v2/pods/)” + PodID + “/measurements?apiKey=” + APIKey + “&fields=temperature,humidity,batteryVoltage”)

And for the update

> UpdateResult = sendHttpPostRequest(CommandURL,“application/json”, CommandData)

---

<div class="post-metadata">

**Author:** ![Ferry](https://community.openhab.org/letter_avatar_proxy/v4/letter/f/b4bc9f/32.png) [@Ferry](https://community.openhab.org/u/Ferry)\
**Post date:** [July 21, 2019, 8:42am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/51 "2019-07-21T08:42:33Z")

</div>

Hello gents,

I noticed that since 2019-07-14 12:10:00 the Sensibo API call doesn’t work anymore. The Sensibo API was changed.

> [ERROR] [rthome.model.script.Pod measurements] - Error reading from Sensibo API

The new call should be per:

```auto
 sendHttpGetRequest("https://home.sensibo.com/api/v2/pods/" + PodID + "?fields=measurements&apiKey=" + APIKey + "")

```

This gives below new JSON formatted output

```auto
[arthome.model.script.Pod Measurement] - {"status": "success", "result": {"measurements": {"batteryVoltage": null, "temperature": 22.5, "humidity": 66.6, "time": {"secondsAgo": 540, "time": "2019-07-21T08:16:00Z"}, "rssi": "-64", "piezo": [null, null]}}}

```

I’m busy changing the API output interpretation but run into a “NumberFormatException” error.

```auto
      val Number PodTemperature = new Double(transform("JSONPATH", "$.result[0].measurements.temperature", PodMeasurements))
      val Number PodHumidity = new Double(transform("JSONPATH", "$.result[0].measurements.humidity", PodMeasurements))

```

```auto
java.lang.NumberFormatException: For input string: "{"status": "success", "result": {"measurements": {"batteryVoltage": null, "temperature": null, "humidity": null, "time": null, "rssi": null, "piezo": [null, null]}}}"
	at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:2043) ~[?:?]
	at sun.misc.FloatingDecimal.parseDouble(FloatingDecimal.java:110) ~[?:?]
	at java.lang.Double.parseDouble(Double.java:538) ~[?:?]
	at java.lang.Double.<init>(Double.java:608) ~[?:?]
	at sun.reflect.GeneratedConstructorAccessor333.newInstance(Unknown Source) ~[?:?]

```

Help on this last step is appreciated after which I will donate once again my rules script for this sensibo integration.

Regards,  
Ferry

---

<div class="post-metadata">

**Author:** ![Patrick010](https://community.openhab.org/user_avatar/community.openhab.org/patrick010/32/86142_2.png) [@Patrick010](https://community.openhab.org/u/Patrick010)\
**Post date:** [February 1, 2022, 9:57am UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/52 "2022-02-01T09:57:47Z")

</div>

Is this still under development? I have some old v1 pods laying around that I’d love to use again. While looking for a OH3 solution I stumbled on this discussion. I’m a OH beginner, so I need to be taken by hand to make this work.  
There are Sensibo bindings, but they are for the v2 Sky.  
Anybody willing to port this to OH3?  
Thanks!

---

<div class="post-metadata">

**Author:** ![infohills](https://community.openhab.org/letter_avatar_proxy/v4/letter/i/96bed5/32.png) [@infohills](https://community.openhab.org/u/infohills)\
**Post date:** [March 20, 2024, 12:49pm UTC](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222/53 "2024-03-20T12:49:21Z")

</div>

That’s great! Sharing your Sensibo control files on GitHub is a helpful resource for others who want to control their Sensibo systems in a similar way. This could also be useful for developers who are interested in building applications that interact with Sensibo using a [business information API](https://www.globaldatabase.com/api). By making your code publicly available, you’re contributing to the developer community and potentially inspiring others to create innovative new tools.

[Previous page](https://community.openhab.org/t/sensibo-api-integration-based-on-rules/29222.md?page=2)