I simply have no way to easily explain this one, so I made an video of it.. It´s just 5 minutes, showing what happens on my system, when I install Zigbee binding, and afterwards uninstall it again… Now, how the heck do I troubleshoot this one? It´s on a Rpi 3b+ running latest openhab 2.5 Release. …

Did I miss something or has Pushover (action) been changed or is this just yet another unexplained issue on my system.. Since yesterday my rules containing pushover send message suddenly no longer works. This is the error I get: 2020-01-06 17:59:00.545 [ERROR] [ntime.internal.engine.RuleEngineImpl]…

If something like that problem with the Pushover problem occurs again, log into the karaf console and run: bundle:list | grep -i pushover Obviously, replace the “pushover” with the name of the add-on you are having issues with.This will definitively show whether or not the add-on is installed or n…

[image] rlkoshak: Obviously, replace the “pushover” with the name of the add-on you are having issues with.This will definitively show whether or not the add-on is installed or not, whether it’s active, and whether you may somehow have two versions installed. Good idea.. I just saw that the a…

I have a similar problem with the telegram action. The sendTelegramMessage isn’t resolved error’s in log. But a few time after startup same rules works find and send. From my point of view it seem’s so, that the actions are not ‘started’ when first rules are triggered.

[image] JMahmens: From my point of view it seem’s so, that the actions are not ‘started’ when first rules are triggered. That could be the case. For Telegram though, there is now a v2 Binding that provides the Action now. I suspect the separate Telegram Action would be considered deprecated a…

I have no better ideas anymore than to try something drastic. In a thought of this specific issue, and some of my previous issues, could be due to beeing hardware failures, I´ve just bought a Rpi 4B (4gb ram version) I´ll setup from scratch, which will be installed on a new SSD as well, (I know, I …

If you go down that path try to be deliberate and avoid doing too much all at once. For example, install and migrate stuff for one binding at a time. That will help isolate the problem more easily if it turns out to be a problem with the configuration.

I will.. In some situations I´ll have to, cause I´ll have to disable my “faulty” system, and then install the same configuration on the new system one by one anyway for the physical devices like my zwave dong, RS485 dongle etc..

Some good and some bad news from here.. I order to reinstall my system on the Rpi4, I first started adding the bindings one by one.. No issues at all. Then I started to add the services, all went well untill I installed the Google Cloud Text-To-Speech (under voice menu). Then the same issue started…

This is driven me nuts here.. Something is very wrong.. :hot_face: I can reproduce the issue when installing the Rest Docs as well, and without the Rest Docs, the issue seems gone.. BUT! I know for sure I could install Rest Docs without this issue, cause I did it last night when I started to reinst…

Serious 2.5 Release issues. How to troubleshoot?

Setup, Configuration and Use Installation

5iver (Scott Rushworth) January 9, 2020, 10:19am 55

I recall a similar behavior to what you have reported after updating to one of the 2.5 snapshots a while back. Search the forum for the Ephemeris configuration issues. This may be the root of the problem.

There are other posts, but here’s one…