# \[SOLVED\] Fail to include z-wave device with security - FGR-223 **URL:** \ **Category:** Bindings\ **Tags:** fibaro, zwave1, secureinclusion\ **Created:** [February 16, 2020, 5:19pm UTC](https://community.openhab.org/t/solved-fail-to-include-z-wave-device-with-security-fgr-223/92926 "2020-02-16T17:19:55Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![wessjan](https://community.openhab.org/user_avatar/community.openhab.org/wessjan/32/28973_2.png) [@wessjan](https://community.openhab.org/u/wessjan)\ **Post date:** [February 16, 2020, 5:19pm UTC](https://community.openhab.org/t/solved-fail-to-include-z-wave-device-with-security-fgr-223/92926/1 "2020-02-16T17:19:55Z")
Hi folks, today i started my second trail to include the Fibaro Roller Shutter 3 in my z-wave network. But I decided, that blinds as well as locks should use security. In principle openHAB 2.5 supports z-wave security inclusion and the product description states: > Supports Z-Wave network Security Modes: S0 with AES-128 > encryption and S2 Authenticated with PRNG-based encryption I searched the forum for some advice to start secure inclusion for z-wave, but haven’t found anything special. Setting the z-wave binding in inclusion mode, pressing the S1 switch 3 times rapidly and the thing shows up in the inbox. After adding it, it was detected as Roller Shutter FGR223. I checked for the Thing properties and figured out, it was not using security. I remembered, that I saw a setting for the z-wave controller to choose device type to be included with security. I excluded the thing, set the “Secure Inclusion Mode” from “Entry Control Devices” to “All Devices”: ![Z-WaveSecure](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/4/a/4af76c3c9dd24b735bbb479a85631c7374615a8d.jpeg) and started inclusion again. But without better success for the security mode, again including worked like a charm, but still no security. ```csv 2020-02-16 17:24:38.783 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node17' has been updated. 2020-02-16 17:24:41.187 [me.event.InboxRemovedEvent] - Discovery Result with UID 'zwave:device:Razberry2:node47' has been removed. 2020-02-16 17:24:41.239 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from UNINITIALIZED to INITIALIZING 2020-02-16 17:24:41.339 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from INITIALIZING to OFFLINE (BRIDGE_OFFLINE): Controller is offline 2020-02-16 17:24:41.355 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from OFFLINE (BRIDGE_OFFLINE): Controller is offline to UNINITIALIZED 2020-02-16 17:24:41.393 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from UNINITIALIZED to UNINITIALIZED (HANDLER_MISSING_ERROR) 2020-02-16 17:24:41.511 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from UNINITIALIZED (HANDLER_MISSING_ERROR) to INITIALIZING 2020-02-16 17:24:41.532 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from INITIALIZING to OFFLINE (BRIDGE_OFFLINE): Controller is offline 2020-02-16 17:24:41.539 [hingStatusInfoChangedEvent] - 'zwave:device:Razberry2:node47' changed from OFFLINE (BRIDGE_OFFLINE): Controller is offline to ONLINE 2020-02-16 17:24:41.564 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node47' has been updated. 2020-02-16 17:24:41.590 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node47' has been updated. 2020-02-16 17:24:41.614 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node47' has been updated. 2020-02-16 17:24:41.761 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node47' has been updated. 2020-02-16 17:24:41.764 [vent.ConfigStatusInfoEvent] - ConfigStatusInfo [configStatusMessages=[]] 2020-02-16 17:24:41.768 [me.event.ThingUpdatedEvent] - Thing 'zwave:device:Razberry2:node47' has been updated. ``` Is this related to my Razberry2 or do I have to set elsewhere a flag to use security? I don’t need or want to switch the existing z-wave devices (switches, dimmer, door/windows sensors and heater thermostats) to secure mode, but I would like to prevent the blinds from tampering with. If someone was able to include the FGR-223 securely, I would be very happy to get a short how-to. Thanks in advance Jan Platform information: - Hardware: Raspberry Pi 3 Model B Plus Rev 1.3 - z-wave controller Razberry2 - OS: Raspbian GNU/Linux 9 (stretch) / Linux 4.19.66-v7+ - Java Runtime Environment: OpenJDK Runtime Environment (Zulu Embedded 8.25.0.76-linux-aarch32hf) (build 1.8.0\_152-b76) - openHAB version: 2.5.1-2 ---
**Author:** ![chris4789](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/e19b73/32.png) [@chris4789](https://community.openhab.org/u/chris4789)\ **Post date:** [February 16, 2020, 5:38pm UTC](https://community.openhab.org/t/solved-fail-to-include-z-wave-device-with-security-fgr-223/92926/2 "2020-02-16T17:38:00Z")
Hi Jan, I have the same setup and also FGR but included without security. As far as I know if including with security does not work you have to factory reset the device before including again. Simple delete and re-add will not work. ---
**Author:** ![5iver](https://community.openhab.org/user_avatar/community.openhab.org/5iver/32/21201_2.png) [@5iver](https://community.openhab.org/u/5iver)\ **Post date:** [February 16, 2020, 9:22pm UTC](https://community.openhab.org/t/solved-fail-to-include-z-wave-device-with-security-fgr-223/92926/3 "2020-02-16T21:22:41Z")
Some devices need to be very close to the controller at the time of secure inclusion. I do not know if this is the case for your device. Also, just to be sure, you’re including through OH and not directly through the controller? ---
**Author:** ![wessjan](https://community.openhab.org/user_avatar/community.openhab.org/wessjan/32/28973_2.png) [@wessjan](https://community.openhab.org/u/wessjan)\ **Post date:** [March 11, 2020, 8:45pm UTC](https://community.openhab.org/t/solved-fail-to-include-z-wave-device-with-security-fgr-223/92926/4 "2020-03-11T20:45:40Z")
Sorry for the late response, I was quite busy the last weeks with no time for my Home Automation. Thanks for the hint with the factory reset, I read that, but haven’t remembered when trying to get the device included. I’ve no my very first device running in secure mode. Best regards Jan