Hi, Has anyone has any luck controlling a lock using openhab2 and zwave binding. Please share what lock and binding did you use. Thanks Nidhi

What you are doing will certainly not work! You MUST use HABmin or at least PaperUI - the device MUST be included with the binding running since secure inclusion must happen within 15 seconds of the device being included and this is simply not possible with what you are doing.

You must use the binding in the following thread -: [image] OH2 Z-Wave refactoring and testing... and SECURITY Bindings The latest version of the development binding dated 8th Sep 2018 is here . Toward the end of last year I spent some time doing some initial…

Chris, Using the July 19th build, I see the following error in log 2017-07-20 09:43:40.404 [DEBUG] [nal.protocol.ZWaveTransactionManager] - STOP transaction timer 2017-07-20 09:45:40.225 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 2: Command received zwave:device:027df97e:node2:lock_door…

I guess you’ve not securely included the device so these channels are not available.

Chris, I installed everything again. But I still see NODE 2: SECURITY_INC State=FAILED in log. How do I include the device securely. I used the paper UI to add the things and used the Habmin to create the items.

Really it’s hard to say what’s happening from one line - sorry. Inclusion should be done in the normal way - read the manual of your device and I would strongly recommend to use HABmin to do the inclusion. The device must be fully reset before starting the inclusion process - again - check the manua…

Chris, Here is the procedure I followed using the device manual. Unplug the USB Z-stick controller from PC. Put it in inclusion mode. Asked the Yale lock to join the network using the key sequence. Plugged the USB Z-stick back to PC. Using Paper UI added the Z-stick device. After the thing was …

Chris, Thanks a lot for your help. I got it working using HabMin inclusion.

[SOLVED] Locks control in openhab2 using zwave

Add-ons Bindings

chris (Chris Jackson) July 19, 2017, 9:28pm 2

You must use the binding in the following thread -:

Personally, I use the Yale Keyfree and it works very well.