chris:
It should be possible to get it working - I used data from your device to derive tests for testing this, and these worked fine.
Please at least try the latest version to see if it is working.
I updated last night and readded the devices. The battery level shows and the tamper works.
Remove Magnet:
2018-03-07 13:03:55.209 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3079 to 3080
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:03:55.209 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 18 03 20 01 FF 37
2018-03-07 13:03:55.217 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:03:55.221 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 18 03 20 01 FF 37
2018-03-07 13:03:55.225 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 18 03 20 01 FF 37
2018-03-07 13:03:55.228 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 18 03 20 01 FF
2018-03-07 13:03:55.232 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Application Command Request (ALIVE:GET_CONFIGURATION)
2018-03-07 13:03:55.237 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Incoming command class BASIC
2018-03-07 13:03:55.240 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Received Basic Request
2018-03-07 13:03:55.244 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Basic Set sent to the controller will be processed as Basic Report
2018-03-07 13:03:55.251 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Basic report, value = 0xFF
==> /var/log/openhab2/events.log <==
2018-03-07 13:03:55.256 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3080 to 3081
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:03:55.258 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 02 00 00 8F
2018-03-07 13:03:55.259 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-03-07 13:03:55.262 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-03-07 13:03:55.265 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got a value event from Z-Wave network, endpoint = 0, command class = BASIC, value = 255
2018-03-07 13:03:55.268 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Message has Ack Pending: Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=24, callback=102, payload=18 03 70 05 01
2018-03-07 13:03:55.270 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:03:55.273 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 02 00 00 8F
2018-03-07 13:03:55.276 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 02 00 00 8F
2018-03-07 13:03:55.278 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 18 0A 71 05 07 FF 00 FF 07 02 00 00
2018-03-07 13:03:55.280 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Application Command Request (ALIVE:GET_CONFIGURATION)
2018-03-07 13:03:55.282 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Incoming command class ALARM
2018-03-07 13:03:55.284 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Received ALARM command V2
2018-03-07 13:03:55.286 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Process NOTIFICATION_REPORT V2
2018-03-07 13:03:55.288 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: NOTIFICATION report - 7 = 255, event=2, status=255
2018-03-07 13:03:55.290 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Alarm Type = BURGLAR (7)
2018-03-07 13:03:55.291 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveAlarmValueEvent
2018-03-07 13:03:55.294 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2018-03-07 13:03:55.295 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 255
2018-03-07 13:03:55.297 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:03:55.299 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter NOTIFICATION event is 2, type OnOffType
2018-03-07 13:03:55.301 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:03:55.304 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Message has Ack Pending: Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=24, callback=102, payload=18 03 70 05 01
Replace Magnet
2018-03-07 13:04:24.771 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 18 03 20 01 00 C8
2018-03-07 13:04:24.784 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
==> /var/log/openhab2/events.log <==
2018-03-07 13:04:24.786 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3081 to 3082
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:04:24.788 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 18 03 20 01 00 C8
2018-03-07 13:04:24.791 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 18 03 20 01 00 C8
2018-03-07 13:04:24.794 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 18 03 20 01 00
2018-03-07 13:04:24.796 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Application Command Request (ALIVE:GET_CONFIGURATION)
2018-03-07 13:04:24.798 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Incoming command class BASIC
2018-03-07 13:04:24.800 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Received Basic Request
2018-03-07 13:04:24.801 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Basic Set sent to the controller will be processed as Basic Report
2018-03-07 13:04:24.803 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 24: Basic report, value = 0x00
2018-03-07 13:04:24.806 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-03-07 13:04:24.807 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-03-07 13:04:24.809 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got a value event from Z-Wave network, endpoint = 0, command class = BASIC, value = 0
2018-03-07 13:04:24.812 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Message has Ack Pending: Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=24, callback=102, payload=18 03 70 05 01
2018-03-07 13:04:24.821 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 10 00 04 00 18 0A 71 05 07 00 00 FF 07 02 00 00 70
==> /var/log/openhab2/events.log <==
2018-03-07 13:04:24.821 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3082 to 3083
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:04:24.828 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:04:24.831 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 10 00 04 00 18 0A 71 05 07 00 00 FF 07 02 00 00 70
2018-03-07 13:04:24.833 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 10 00 04 00 18 0A 71 05 07 00 00 FF 07 02 00 00 70
2018-03-07 13:04:24.836 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 18 0A 71 05 07 00 00 FF 07 02 00 00
2018-03-07 13:04:24.838 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Application Command Request (ALIVE:GET_CONFIGURATION)
2018-03-07 13:04:24.840 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Incoming command class ALARM
2018-03-07 13:04:24.843 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Received ALARM command V2
2018-03-07 13:04:24.845 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Process NOTIFICATION_REPORT V2
2018-03-07 13:04:24.847 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: NOTIFICATION report - 7 = 0, event=2, status=255
2018-03-07 13:04:24.849 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Alarm Type = BURGLAR (7)
2018-03-07 13:04:24.851 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveAlarmValueEvent
2018-03-07 13:04:24.853 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2018-03-07 13:04:24.856 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 255
2018-03-07 13:04:24.858 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:04:24.860 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter NOTIFICATION event is 2, type OnOffType
2018-03-07 13:04:24.862 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:04:24.865 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Message has Ack Pending: Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=24, callback=102, payload=18 03 70 05 01
2018-03-07 13:04:25.431 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 1E 03 20 01 FF 31
==> /var/log/openhab2/events.log <==
2018-03-07 13:04:25.433 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3083 to 3084
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:04:25.437 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:04:25.443 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 1E 03 20 01 FF 31
2018-03-07 13:04:25.445 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 1E 03 20 01 FF 31
2018-03-07 13:04:25.447 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 1E 03 20 01 FF
==> /var/log/openhab2/events.log <==
2018-03-07 13:04:25.454 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3084 to 3085
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:04:25.457 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 30: Application Command Request (ALIVE:DONE)
2018-03-07 13:04:25.453 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 10 00 04 00 1E 0A 71 05 07 FF 00 FF 07 02 00 00 89
2018-03-07 13:04:25.462 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 30: Starting initialisation from DONE
2018-03-07 13:04:25.464 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@96710e already registered
2018-03-07 13:04:25.466 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 30: Incoming command class BASIC
2018-03-07 13:04:25.468 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 30: Received Basic Request
2018-03-07 13:04:25.470 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 30: Basic Set sent to the controller will be processed as Basic Report
2018-03-07 13:04:25.472 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 30: Basic report, value = 0xFF
2018-03-07 13:04:25.474 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-03-07 13:04:25.476 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-03-07 13:04:25.478 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Got a value event from Z-Wave network, endpoint = 0, command class = BASIC, value = 255
2018-03-07 13:04:25.480 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Updating channel state zwave:device:cab10335:node30:sensor_binary to ON [OnOffType]
2018-03-07 13:04:25.483 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Transaction not completed: node address inconsistent. lastSent=24, incoming=255
==> /var/log/openhab2/events.log <==
2018-03-07 13:04:25.488 [vent.ItemStateChangedEvent] - FF_Office_PIR_Motion changed from OFF to ON
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:04:25.491 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:04:25.494 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 10 00 04 00 1E 0A 71 05 07 FF 00 FF 07 02 00 00 89
2018-03-07 13:04:25.498 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 10 00 04 00 1E 0A 71 05 07 FF 00 FF 07 02 00 00 89
2018-03-07 13:04:25.501 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 1E 0A 71 05 07 FF 00 FF 07 02 00 00
2018-03-07 13:04:25.505 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 30: Application Command Request (ALIVE:DONE)
2018-03-07 13:04:25.508 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 30: Starting initialisation from DONE
2018-03-07 13:04:25.511 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@96710e already registered
2018-03-07 13:04:25.514 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 30: Incoming command class ALARM
2018-03-07 13:04:25.517 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 30: Received ALARM command V2
2018-03-07 13:04:25.520 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 30: Process NOTIFICATION_REPORT V2
2018-03-07 13:04:25.523 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 30: NOTIFICATION report - 7 = 255, event=2, status=255
2018-03-07 13:04:25.526 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 30: Alarm Type = BURGLAR (7)
2018-03-07 13:04:25.529 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveAlarmValueEvent
2018-03-07 13:04:25.532 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2018-03-07 13:04:25.535 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 255
2018-03-07 13:04:25.538 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:04:25.540 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter NOTIFICATION event is 2, type OnOffType
2018-03-07 13:04:25.543 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 30: Updating channel state zwave:device:cab10335:node30:alarm_burglar to ON [OnOffType]
2018-03-07 13:04:25.550 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Transaction not completed: node address inconsistent. lastSent=24, incoming=255
Remove Cover:
2018-03-07 13:06:30.894 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 03 00 00 8E
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:30.898 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3106 to 3107
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:30.909 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:06:30.916 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 03 00 00 8E
2018-03-07 13:06:30.921 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 10 00 04 00 18 0A 71 05 07 FF 00 FF 07 03 00 00 8E
2018-03-07 13:06:30.926 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 18 0A 71 05 07 FF 00 FF 07 03 00 00
2018-03-07 13:06:30.928 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Application Command Request (ALIVE:GET_CONFIGURATION)
2018-03-07 13:06:30.930 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Incoming command class ALARM
2018-03-07 13:06:30.932 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Received ALARM command V2
2018-03-07 13:06:30.935 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Process NOTIFICATION_REPORT V2
2018-03-07 13:06:30.937 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: NOTIFICATION report - 7 = 255, event=3, status=255
2018-03-07 13:06:30.939 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 24: Alarm Type = BURGLAR (7)
2018-03-07 13:06:30.942 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveAlarmValueEvent
2018-03-07 13:06:30.945 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2018-03-07 13:06:30.948 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 255
2018-03-07 13:06:30.950 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:06:30.952 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter NOTIFICATION event is 3, type OnOffType
2018-03-07 13:06:30.954 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 24: Updating channel state zwave:device:cab10335:node24:alarm_tamper to ON [OnOffType]
2018-03-07 13:06:30.962 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:30.963 [vent.ItemStateChangedEvent] - FF_Garage_Entry_Tamper changed from OFF to ON
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:30.965 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Checking transaction complete: Message has Ack Pending: Message: class=SendData[0x13], type=Request[0x00], priority=Immediate, dest=24, callback=106, payload=18 03 70 05 01
2018-03-07 13:06:33.041 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 2B 03 20 01 00 FB
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:33.049 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3107 to 3108
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:33.055 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:06:33.060 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 2B 03 20 01 00 FB
2018-03-07 13:06:33.063 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 2B 03 20 01 00 FB
2018-03-07 13:06:33.066 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 2B 03 20 01 00
2018-03-07 13:06:33.070 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Application Command Request (ALIVE:DONE)
2018-03-07 13:06:33.071 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Starting initialisation from DONE
2018-03-07 13:06:33.073 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1099bb0 already registered
2018-03-07 13:06:33.075 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Incoming command class BASIC
2018-03-07 13:06:33.076 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 43: Received Basic Request
2018-03-07 13:06:33.078 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 43: Basic Set sent to the controller will be processed as Basic Report
2018-03-07 13:06:33.080 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 43: Basic report, value = 0x00
2018-03-07 13:06:33.081 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-03-07 13:06:33.083 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-03-07 13:06:33.085 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got a value event from Z-Wave network, endpoint = 0, command class = BASIC, value = 0
2018-03-07 13:06:33.087 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating channel state zwave:device:cab10335:node43:sensor_binary to OFF [OnOffType]
2018-03-07 13:06:33.089 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Transaction not completed: node address inconsistent. lastSent=24, incoming=255
2018-03-07 13:06:33.110 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 11 00 04 00 2B 0B 71 05 07 00 00 FF 07 00 01 08 00 48
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:33.115 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3108 to 3109
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:33.118 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
2018-03-07 13:06:33.120 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 11 00 04 00 2B 0B 71 05 07 00 00 FF 07 00 01 08 00 48
2018-03-07 13:06:33.123 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 11 00 04 00 2B 0B 71 05 07 00 00 FF 07 00 01 08 00 48
2018-03-07 13:06:33.125 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 2B 0B 71 05 07 00 00 FF 07 00 01 08 00
2018-03-07 13:06:33.126 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Application Command Request (ALIVE:DONE)
2018-03-07 13:06:33.128 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Starting initialisation from DONE
2018-03-07 13:06:33.130 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1099bb0 already registered
2018-03-07 13:06:33.132 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Incoming command class ALARM
2018-03-07 13:06:33.133 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 43: Received ALARM command V4
2018-03-07 13:06:33.135 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 43: Process NOTIFICATION_REPORT V4
2018-03-07 13:06:33.136 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 43: NOTIFICATION report - 7 = 0, event=0, status=255
2018-03-07 13:06:33.138 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 43: Alarm Type = BURGLAR (7)
2018-03-07 13:06:33.140 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveAlarmValueEvent
2018-03-07 13:06:33.142 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2018-03-07 13:06:33.143 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got a value event from Z-Wave network, endpoint = 0, command class = ALARM, value = 255
2018-03-07 13:06:33.145 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter processing NOTIFICATION
2018-03-07 13:06:33.147 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - Alarm converter NOTIFICATION event is 0, type OnOffType
2018-03-07 13:06:33.149 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating channel state zwave:device:cab10335:node43:alarm_burglar to OFF [OnOffType]
2018-03-07 13:06:33.152 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Transaction not completed: node address inconsistent. lastSent=24, incoming=255
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:33.156 [vent.ItemStateChangedEvent] - FF_Kitchen_PIR_Alarm changed from ON to OFF
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:33.199 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 2B 03 80 03 FF A6
2018-03-07 13:06:33.203 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
==> /var/log/openhab2/events.log <==
2018-03-07 13:06:33.207 [vent.ItemStateChangedEvent] - zwave_serial_zstick_cab10335_serial_sof changed from 3109 to 3110
==> /var/log/openhab2/openhab.log <==
2018-03-07 13:06:33.209 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 2B 03 80 03 FF A6
2018-03-07 13:06:33.211 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 2B 03 80 03 FF A6
2018-03-07 13:06:33.213 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class=ApplicationCommandHandler[0x04], type=Request[0x00], priority=High, dest=255, callback=0, payload=00 2B 03 80 03 FF
2018-03-07 13:06:33.216 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Application Command Request (ALIVE:DONE)
2018-03-07 13:06:33.218 [DEBUG] [alization.ZWaveNodeInitStageAdvancer] - NODE 43: Starting initialisation from DONE
2018-03-07 13:06:33.221 [DEBUG] [ve.internal.protocol.ZWaveController] - Event Listener org.openhab.binding.zwave.internal.protocol.initialization.ZWaveNodeInitStageAdvancer@1099bb0 already registered
2018-03-07 13:06:33.223 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 43: Incoming command class BATTERY
2018-03-07 13:06:33.225 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 43: Received Battery Request
2018-03-07 13:06:33.228 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 43: Battery report value = 255
2018-03-07 13:06:33.230 [WARN ] [ommandclass.ZWaveBatteryCommandClass] - NODE 43: BATTERY LOW!
2018-03-07 13:06:33.232 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
2018-03-07 13:06:33.234 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2018-03-07 13:06:33.236 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Got a value event from Z-Wave network, endpoint = 0, command class = BATTERY, value = 0
2018-03-07 13:06:33.239 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 43: Updating channel state zwave:device:cab10335:node43:battery-level to 0 [DecimalType]
2018-03-07 13:06:33.245 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 24: Transaction not completed: node address inconsistent. lastSent=24, incoming=255