# \[SOLVED\] Zwave Qubino ZMNHCD1 difficulties to re-include

**URL:** <https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581>\
**Category:** Bindings\
**Created:** [March 6, 2019, 2:03pm UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581 "2019-03-06T14:03:52Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![smhaller](https://community.openhab.org/user_avatar/community.openhab.org/smhaller/32/3218_2.png) [@smhaller](https://community.openhab.org/u/smhaller)\
**Post date:** [March 6, 2019, 2:03pm UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/1 "2019-03-06T14:03:52Z")

</div>

Dear all

I have difficulties to re-include one of my Flush Shutter nodes.

> 2019-03-06 14:58:19.715 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - NODE 6: Device discovered  
> 2019-03-06 14:58:19.716 [DEBUG] [al.protocol.ZWaveInclusionController] - Inclusion event: Current state IncludeDone, new event IncludeDone  
> 2019-03-06 14:58:19.716 [DEBUG] [ol.serialmessage.AddNodeMessageClass] - Ending INCLUSION mode.  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Added 80 to queue - size 1  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.  
> 2019-03-06 14:58:19.717 [DEBUG] [al.protocol.ZWaveInclusionController] - ZWave controller end exclusion  
> 2019-03-06 14:58:19.717 [DEBUG] [ve.internal.protocol.ZWaveController] - ZWaveController include done  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 79: Advanced to DONE  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: Response processed after 163ms  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: TID 79: Transaction completed  
> 2019-03-06 14:58:19.717 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:79 DONE  
> 2019-03-06 14:58:19.720 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty  
> 2019-03-06 14:58:19.720 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.  
> 2019-03-06 14:58:19.721 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 05 00 4A 05 00 B5  
> 2019-03-06 14:58:19.721 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 255: Sending REQUEST Message = 01 05 00 4A 05 00 B5  
> 2019-03-06 14:58:19.721 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT  
> 2019-03-06 14:58:19.722 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 80: [WAIT\_REQUEST] priority=Controller, requiresResponse=true, callback: 0  
> 2019-03-06 14:58:19.722 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0\<\>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 80: [WAIT\_REQUEST] priority=Controller, requiresResponse=true, callback: 0  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty  
> 2019-03-06 14:58:19.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.  
> 2019-03-06 14:58:24.722 [DEBUG] [sactionManager$ZWaveTransactionTimer] - NODE 255: TID 80: Timeout at state WAIT\_REQUEST. 3 retries remaining.  
> 2019-03-06 14:58:24.722 [DEBUG] [sactionManager$ZWaveTransactionTimer] - TID 80: Transaction is current transaction, so clearing!!!  
> 2019-03-06 14:58:24.723 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 80: Transaction CANCELLED  
> 2019-03-06 14:58:24.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 255: notifyTransactionResponse TID:80 CANCELLED  
> 2019-03-06 14:58:24.723 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.  
> 2019-03-06 14:58:45.360 [DEBUG] [org.openhab.binding.zwave] - ServiceEvent REGISTERED - {org.eclipse.smarthome.config.core.status.ConfigStatusProvider}={service.id=519, service.bundleid=261, service.scope=singleton} - org.openhab.binding.zwave  
> 2019-03-06 14:58:45.368 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Initializing ZWave thing handler zwave:device:2f18a74d:node6.  
> 2019-03-06 14:58:45.370 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: MANUFACTURER not set  
> 2019-03-06 14:58:45.370 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Controller status changed to ONLINE.  
> 2019-03-06 14:58:45.371 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Controller is ONLINE. Starting device initialisation.  
> 2019-03-06 14:58:45.371 [DEBUG] [ve.internal.protocol.ZWaveController] - Event listener added.  
> 2019-03-06 14:58:45.371 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Initialising Thing Node…  
> 2019-03-06 14:58:45.371 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling intialised at 1800 seconds - start in 1672200 milliseconds.  
> 2019-03-06 14:58:45.371 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Device initialisation complete.  
> 2019-03-06 14:58:53.183 [DEBUG] [al.protocol.ZWaveInclusionController] - ZWave inclusion controller finalised

I dont get the reason why habmin stays saying: Node not found in Z-wave network

Kind regards  
Stefan

---

<div class="post-metadata">

**Author:** ![smhaller](https://community.openhab.org/user_avatar/community.openhab.org/smhaller/32/3218_2.png) [@smhaller](https://community.openhab.org/u/smhaller)\
**Post date:** [March 8, 2019, 6:53am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/2 "2019-03-08T06:53:00Z")

</div>

Meanwhile I found out that the device is definitely not allocated to the Z-Stick anymore - checked this with Zensys tools.  
But it seems the OH (v2.4), Zwave binding (2.5 snapshot) still knows about it.

So the question is now: How to get a clean state in OH (cache and tmp already deleted and OH restarted).  
Is there anything else to check?

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [March 8, 2019, 8:28am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/3 "2019-03-08T08:28:42Z")

</div>

> [@smhaller](#):
>
> I dont get the reason why habmin stays saying: Node not found in Z-wave network

When the binding starts, it gets the list of all devices that are known on the network - the binding will report this if the controller doesn’t have the specific device in the network any longer.

---

<div class="post-metadata">

**Author:** ![smhaller](https://community.openhab.org/user_avatar/community.openhab.org/smhaller/32/3218_2.png) [@smhaller](https://community.openhab.org/u/smhaller)\
**Post date:** [March 11, 2019, 8:23am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/4 "2019-03-11T08:23:54Z")

</div>

I have my node back (Same node ID).  
After running inclusion out of a domoticz / OZW setup.

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [March 11, 2019, 9:04am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/5 "2019-03-11T09:04:27Z")

</div>

> [@smhaller](#):
>
> After running inclusion out of a domoticz / OZW setup.

Why didn’t the inclusion work from OH - or didn’t you try it? It should be exactly the same?

---

<div class="post-metadata">

**Author:** ![smhaller](https://community.openhab.org/user_avatar/community.openhab.org/smhaller/32/3218_2.png) [@smhaller](https://community.openhab.org/u/smhaller)\
**Post date:** [March 11, 2019, 9:39am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/6 "2019-03-11T09:39:56Z")

</div>

I tried it several times with no luck. I have even placed the Qubino in a two meter distance from the controller ([Zwave.me](http://Zwave.me) UZB) to do so. I don’t know what the reason is for that, I’m sorry. But anyway thank you very much for all your support!

Cheers  
Stefan

---

<div class="post-metadata">

**Author:** ![chris](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/958977/32.png) [@chris](https://community.openhab.org/u/chris)\
**Post date:** [March 11, 2019, 10:16am UTC](https://community.openhab.org/t/solved-zwave-qubino-zmnhcd1-difficulties-to-re-include/69581/7 "2019-03-11T10:16:36Z")

</div>

Ok, that’s pretty strange. Given that OZW is doing exactly the same as OH, I doubt it’s related, but who knows.
