# Teach in of Eltako devices does not work

**URL:** <https://community.openhab.org/t/teach-in-of-eltako-devices-does-not-work/102450>\
**Category:** Beginners\
**Tags:** enocean\
**Created:** [July 17, 2020, 7:59pm UTC](https://community.openhab.org/t/teach-in-of-eltako-devices-does-not-work/102450 "2020-07-17T19:59:26Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jackmule](https://community.openhab.org/letter_avatar_proxy/v4/letter/j/85f322/32.png) [@jackmule](https://community.openhab.org/u/jackmule)\
**Post date:** [July 18, 2020, 11:29pm UTC](https://community.openhab.org/t/teach-in-of-eltako-devices-does-not-work/102450/2 "2020-07-18T23:29:30Z")

</div>

I’m struggling on the same part at the moment 🙂

> [@Having trouble by getting enOcean bindings running](https://community.openhab.org/t/having-trouble-by-getting-enocean-bindings-running/83818/12):
>
> Hey, I’ve finally found a few hours to work on. I have fixed the problem with error message and duplicate device addresses after making a factory reset and clear sensor list of all actors yesterday. It was a lot of work to re-teach all the switches. BaseId: FF940300 FF940301 FF940302 FF940303 FF940304 FF940305 FF940306 FF940307 FF940308 Thing config example: Items overview: Control view Paper UI: If I set the upper switch on the FSB14 to …

---

_[View the full topic](https://community.openhab.org/t/teach-in-of-eltako-devices-does-not-work/102450)._