First zigbee device arrived. Stick is in a USB3 port of a Pi4 direct with no extension cable. ncp-uart-sw_679_115200 firmware
Device is a Gledopto bulb. I bought this on the basis of reviews showing general compatibly with other hubs. Cheaper than a hue. Will try Ikea next.
Included at first try with device and controller 6m apart so not long range.
2021-04-22 14:16:16.141 [INFO ] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Starting ZigBee device discovery
2021-04-22 14:16:16.142 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Creating ZigBee device zigbee:device with bridge zigbee:coordinator_ember:0963bb1626
2021-04-22 14:16:16.148 [DEBUG] [scovery.ZigBeeNodePropertyDiscoverer] - 60A423FFFE023BC6: ZigBee node property discovery start
2021-04-22 14:16:16.152 [DEBUG] [scovery.ZigBeeNodePropertyDiscoverer] - 60A423FFFE023BC6: ZigBee node property discovery using basic cluster on endpoint 9D7E/11
2021-04-22 14:16:16.363 [DEBUG] [scovery.ZigBeeNodePropertyDiscoverer] - 60A423FFFE023BC6: Node doesn't support OTA cluster
2021-04-22 14:16:16.365 [DEBUG] [scovery.ZigBeeNodePropertyDiscoverer] - 60A423FFFE023BC6: ZigBee node property discovery complete: {zigbee_logicaltype=ROUTER, zigbee_powerlevel=FULL, zigbee_manufacturercode=0x1002, modelId=GL-B-008P, zigbee_networkaddress=40318, zigbee_powersource=MAINS, zigbee_stkversion=0, zigbee_datecode=, zigbee_zclversion=3, vendor=GLEDOPTO, zigbee_powermode=RECEIVER_ON_IDLE, zigbee_powersources=[MAINS], hardwareVersion=0, zigbee_applicationVersion=0}
2021-04-22 14:16:16.368 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Checking endpoint 242 channels
2021-04-22 14:16:16.379 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Checking endpoint 11 channels
2021-04-22 14:16:16.439 [DEBUG] [ding.zigbee.internal.ZigBeeDataStore] - 60A423FFFE023BC6: ZigBee saving network state complete.
2021-04-22 14:16:17.263 [DEBUG] [er.ZigBeeChannelConverterFactoryImpl] - 60A423FFFE023BC6: Removing channel zigbee:switch_onoff in favor of zigbee:switch_level
2021-04-22 14:16:17.264 [DEBUG] [er.ZigBeeChannelConverterFactoryImpl] - 60A423FFFE023BC6: Removing channel zigbee:switch_level in favor of zigbee:color_color
2021-04-22 14:16:17.266 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Initializing channel zigbee:device:0963bb1626:60a423fffe023bc6:60A423FFFE023BC6_11_colortemperature with org.openhab.binding.zigbee.internal.converter.ZigBeeConverterColorTemperature@126793e
2021-04-22 14:16:17.641 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Initializing channel zigbee:device:0963bb1626:60a423fffe023bc6:60A423FFFE023BC6_11_color with org.openhab.binding.zigbee.internal.converter.ZigBeeConverterColorColor@1724b96
2021-04-22 14:16:17.646 [DEBUG] [.converter.ZigBeeConverterColorColor] - 60A423FFFE023BC6: Device supports Hue/Saturation color set of commands
2021-04-22 14:16:18.648 [DEBUG] [bee.discovery.ZigBeeDiscoveryService] - 60A423FFFE023BC6: Update ZigBee device zigbee:device with bridge zigbee:coordinator_ember:0963bb1626, label 'GLEDOPTO GL-B-008P'
2021-04-22 14:16:18.938 [DEBUG] [ding.zigbee.internal.ZigBeeDataStore] - 60A423FFFE023BC6: ZigBee saving network state complete.
Happy to test other type of device if anyone has any recommendations of good ZigBee devices of any type.