Thank you for the great tutorial. This is exactly what I was looking for to control my lighting and radiators.
I am now ready that the configuration via the timeline and the triggering of individual lamps works. However, I am a bit at a loss as to how I can properly regulate my radiators (11 in total).
In another post (Yet another Heating Setup) I basically found exactly the kind of regulation that I would like to have with me. To be honest, I’m just a little at a loss as to how I regulate the respective radiators at different temperatures at different times. In the articles and examples, all thermostats are set to the same temperature.
Is this even possible? Can you give me some food for thought?
first of all one can see the global settings. Heating mode and the current mode is self describing .
the second line is to switch the various “cards” (switching with visibility in sitemap) and the ‘1x on’ switch. This switch is to override the time based heating plan for maximal one day. If the switch is active the heating mode is day. Latest at midnight the switch will be deactivated and the timbased heating plan is active again.
first card (day is active):
Here, in the first column one can select the temperature for each room in the day mode. In the second column one can select the mode for the single room.
auto - time based temperatures
off - heating is deactivated (frost protection)
+2° - this means, the temperature should be increased by 2 degrees in the room for a certain time (comfort temperature for e.g. 30 minutes)
second card (night is active):
In the first column one can select the temperatue for each room in night mode. In the second column one can select whether the roomtemperature is reduced by the timeline or the day mode is permantently active.
third card (setup is active):
One can choose the different timeintervals for day- mode and night- mode.
In this solution the timeline picker is a realy minor part but maybe you find one or two ideas.
I find this solution even more elegant. Would it be possible that you might make the structure of your settings available to me so that I can then change it to my needs? I am an absolute beginner at writing rules.
Sorry, i wouldn’t share the complete code. This is a really big block (600 lines + sitemap entry’s + dummy items) with window open detection and state reporting. But it is not well documented and contains personal data.
If you start with your own code i will gladly help you. (better is a new topic).
The night mode in the UI is a synonym for a second temperatur level. To realizie this, i have for each room defined two different setpoints as item. The setpoints will be managed with the timeline in the setup card.
The virtual cards (day, night, setup) are controlled with the help of visibillity in the sitemap without rules.
today on my test setup i look at the Webview url and the item Webview still loading…nothing appear , if i use chrome and past the url all is fine on firefox but not on chrome , on android local connection same still loading… nothing appear , is a know issue ? thanks again for this amazing timeline picker
thanks for your help, so delete cache 3 times on phone and pc (windows) rebooting both and the problem remain, trying on firefox …is fine , trying on Chrome not working , trying on edge not working , trying on my older tablet android and there is working… ? same account chrome on all device and same sitemap , triggered item work fine, also clear cache on openhab-Cli and rebooting