# Tuya zigbee 4 button remote **URL:** \ **Category:** Beginners\ **Created:** [December 30, 2022, 10:33pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744 "2022-12-30T22:33:37Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![clark](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/6de8d8/32.png) [@clark](https://community.openhab.org/u/clark)\ **Post date:** [December 30, 2022, 10:33pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/1 "2022-12-30T22:33:37Z")
- Platform information: - Issue of the topic: I have a couple of tuya 4 button scene controllers. I initially had it connected through Smartthings but with the zigbee binding in OpenHab 3.4.0 supporting these units I decided to join them directly through an ember USB stick The unit works but sometimes it shows as OFFLINE in the UI and I have to press a button to bring it online and have OpenHab respond to button presses. Also on a regular basis the four LEDs blink once. Has anyone seen this behavior? Here is the config UID: zigbee:tuya\_ts0044:1d626943b7:b4e3f9fffe14e67c label: ZB Controller 2 thingTypeUID: zigbee:tuya\_ts0044 configuration: zigbee\_macaddress: B4E3F9FFFE14E67C bridgeUID: zigbee:coordinator\_ember:1d626943b7 Thanks ---
**Author:** ![Pedro\_Liberal](https://community.openhab.org/user_avatar/community.openhab.org/pedro_liberal/32/113638_2.png) [@Pedro\_Liberal](https://community.openhab.org/u/Pedro_Liberal)\ **Post date:** [December 31, 2022, 9:49am UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/2 "2022-12-31T09:49:08Z")
Can you share a screenshot, mode number, link to the device or similar?? ---
**Author:** ![clark](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/6de8d8/32.png) [@clark](https://community.openhab.org/u/clark)\ **Post date:** [December 31, 2022, 3:43pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/4 "2022-12-31T15:43:59Z")
Please see below ![4 button](https://community-openhab-org.s3.dualstack.eu-central-1.amazonaws.com/original/3X/6/5/65ea310240449ace53e1b8c2ecebaec22620ecd0.jpeg) ---
**Author:** ![Pedro\_Liberal](https://community.openhab.org/user_avatar/community.openhab.org/pedro_liberal/32/113638_2.png) [@Pedro\_Liberal](https://community.openhab.org/u/Pedro_Liberal)\ **Post date:** [December 31, 2022, 5:18pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/5 "2022-12-31T17:18:01Z")
Oh that’s completely different from what I have. Humm.. are you sure you’re not having link quality issues? Have you tried leaving the switch next to the antena to see if it happens again?? Edit: also, is that the stock battery? Try replacing it with a good quality new battery. ---
**Author:** ![clark](https://community.openhab.org/letter_avatar_proxy/v4/letter/c/6de8d8/32.png) [@clark](https://community.openhab.org/u/clark)\ **Post date:** [January 1, 2023, 3:38pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/6 "2023-01-01T15:38:34Z")
I don’t think it’s a link quality issue. The distance to the USB stick is about the same as the distance to the smartthings hub. Just to check, I left one of the remotes in the same room as the USB stick and this morning it showed OFFLINE. These units don’t come with a battery, I had to buy them. ---
**Author:** ![anon71759204](https://community.openhab.org/letter_avatar_proxy/v4/letter/a/2acd7d/32.png) [@anon71759204](https://community.openhab.org/u/anon71759204)\ **Post date:** [January 2, 2023, 6:51pm UTC](https://community.openhab.org/t/tuya-zigbee-4-button-remote/142744/7 "2023-01-02T18:51:55Z")
My experience: If the Zigbee coordinator (Zigbee2MQTT) dies, the 4 button remote doesn’t seem to re-join the Zigbeee network when the coordinator is back online. I have to remove the battery to revive the device.